Shop our Airplanes Products Drone Products Sales
lpaus967's blog View Details
Posted by lpaus967 | Sep 16, 2012 @ 09:10 PM | 2,095 Views
Hello. I have a tricopter I have been working on for a while and I cant get past this one issue, which i have tried looking up many times. I can get the motors to work individually without being connected to the kk board. But once I put the KK board in the mix then the motor(s) will not work. I have tried every combination I can think of and I am getting quite discouraged. If anyone knows the issue it would be great if you could pitch in some idea. If you want a picture or video let me know.
Posted by lpaus967 | Aug 14, 2012 @ 02:40 PM | 2,141 Views
Hey guys im having a issue with programming my tricopter. I have a hobbyking KK board and 3 turnigy plus esc i binded my receiver but they are still not letting me add any power they just keep making a beep noise. I dont know what to do
Posted by lpaus967 | May 26, 2012 @ 04:22 PM | 2,235 Views
Hi, a quick question do the hobbykings kk boards replace gyros, i am making a tricopter and i have 4 gyros and a kk board, which do i use or both?
Posted by lpaus967 | May 07, 2012 @ 11:56 AM | 3,297 Views
Hello, i am wondering what would owkr best for me for FPV. I need the copter to support a gopro and some FPV gear, i would rather is be the cheapest way, but I rather good parts then cheap parts that will break. What would work best a tricopter or a quad copter?
Posted by lpaus967 | Apr 25, 2012 @ 07:52 PM | 2,541 Views
Is this a good choice for a UHF, what type of transmitter should i use, and can i use it with the spectrum
Posted by lpaus967 | Apr 23, 2012 @ 08:48 PM | 2,354 Views
Hello, I am having trouble selecting my next fpv aircraft, but I think i have narrowed it down to two the hobbyking 168 fpv aircraft and the Raven from nitroplanes

which would you say would be better for FPV, which would give me the best flight time and best flying characteristics thanks!
Posted by lpaus967 | Apr 20, 2012 @ 02:12 PM | 2,633 Views
I have a battery that has 40C discharge, is this to high for a 1400kv motor? I have been using batteries that have 20C
Posted by lpaus967 | Mar 31, 2012 @ 02:48 PM | 2,446 Views
Hello, I am trying to figure my elevons out and need some help. When i push right and left ton my stick it makes it go up and down and when i push up and down it makes the elevons go left and right. i have tried to reverse this but it doesn't work, how can i fix it?
Posted by lpaus967 | Jan 22, 2012 @ 01:23 PM | 2,379 Views
I have been struggling with this for to long now. Please check out the video to help give me a solution.
Posted by lpaus967 | Jan 22, 2012 @ 01:02 PM | 1,672 Views
Do not know what the problem is need some help.
Posted by lpaus967 | Jan 15, 2012 @ 03:45 PM | 2,528 Views
I have a AR6115e 6 channel reciever. On the specs it says voltage range 3.5-9.6v

Does this mean that if I have an 11.1 volt battery it will not work?
Posted by lpaus967 | Jan 12, 2012 @ 03:10 PM | 2,658 Views
I am making an cargo plane. The wingspan is around 80 inches. It is around 60 inches long. It is made out of 9mm and 6mm depron. I am looking on putting two motors on it. Which one of these motors would work the best? or Also which esc would work best\? or your help means a lot. Thanks!
Posted by lpaus967 | Jan 07, 2012 @ 07:08 PM | 2,588 Views
I was reading this. The receiver also features a red LED that indicates the number of holds that have occurred since the receiver was last powered on. What are hold?
Posted by lpaus967 | Jan 04, 2012 @ 08:15 PM | 2,653 Views
Here my problem, I have a fully charged battery i plug into my esc. My receiver lights up and the little H has a red light in it. I go to apply power or searing and nothing happens. When i plug in more than 3 servos the light goes out. I need help with this guys no idea whats wrong. I have a ds6 spectrum radio and 6 channel spectrum receiver
Posted by lpaus967 | Dec 21, 2011 @ 05:37 PM | 3,602 Views
What is everyones favorite type of propellers. Tri blade, ext,...
Posted by lpaus967 | Dec 20, 2011 @ 07:42 PM | 2,754 Views
Hey guys i am getting this turnigy, 1000kv motorhttp :// r_Motor.html and i want to get a good 11.5 prop for it. What are the best type of props, three blades, sf propellers, ect... what are there advantages adn dissadvantages
Posted by lpaus967 | Dec 14, 2011 @ 09:33 PM | 3,239 Views
I feel really stupid guys, I am new at ths hobby and i have a 3000mah 40c 11.1 volt battery and i plugged it into my 18am plush speed controller. There was a spark and smokes blew out of my esc. Can you guys tell me what happened? Is my battery ok, can i still use it or did it completely short? I opened my esc after and there was no obvious or even noticible marks of fire or heat, but smoke came out of it. Thanks guys
Posted by lpaus967 | Dec 08, 2011 @ 08:31 PM | 2,749 Views
Hey guys, heres the situation.

I have a 24g blue wounder motor that i have just installed, i just sottered all the wires for the motor, battery, and esc. When i first tested the motor by just seeing if it turns it worked great. I then put the servos in. The next time i tried to run the motor all it did was twitch and make some funny, and painful sounding noises. It will not spin just twitch. I felt the esc and it is fairly warm and something is defiantly off. Do you guys know if this is a esc issue like is my sottering not fully connected, it was working before though. Everythign else works fine. Thanks
Posted by lpaus967 | Dec 06, 2011 @ 07:21 PM | 2,664 Views
Hello, I am looking for a 500w motor with a preferably 12" blade. If someone could give me a link to where i could get one of these it would be really helpful!
Posted by lpaus967 | Dec 06, 2011 @ 04:19 PM | 2,609 Views
Hello, I am wondering what is everyone views on 1.2ghz FPV systems.