Update OpenTX Firmware to 2.3.10
Update 4in1 Firmware to V1.3.1.69
OpenTX Firmware update:
https://www.open-tx.org/downloads
Copy new firmware to TX SDCard then flash update.
Update SDCard content for 2.3.10
4in1 Firmware update:
If you don't need/want to customize the multi module firmware then you can use pre-compiled binaries available here:
https://github.com/pascallanger/DIY-...odule/releases
To just use the firmware file selector here:
https://downloads.multi-module.org/ .
Flashing from the Transmitter
For radios running OpenTX, there is an option to flash a precompiled firmware file to the multiprotocol module:
OpenTX: using the SD card browser
What you need:
A precompiled multiprotocol firmware file (.hex for Atmega328p or .bin for STM32)
A Flash from TX bootloader installed on an Atmega328p or STM32 multiprotocol module
A means to get the firmware file onto the transmitter's SD card
OpenTX 2.3.3 or newer
Copy the firmware file to the radio's SD card - it doesn't matter where you put it
Switch the radio on normally and use the radio SYS menu to locate the file on the SD card
Highlight the file and press the ENTER button
Choose Flash internal module or Flash external module as
...Continue Reading