Use foam made wingspan 750mm pilot :
1. Draw side view of pilot template,
2. Cut 5mm foam x 1,

3. Draw side view of pilot without nose template.
4. Cut 5mm foam x 4,
5. Glue PART 2 each side 2 piece.

6. Draw hat template,
7. Depicting the hat edge on foam,
8. Cut and sand to creative face as you like,

9. Draw earmuffs template,
10. Cut 3mm foam x 2,
11. Glue PART 8 each side 1 piece.

12. Draw clothes template,
13. Cut 5mm foam x 2,
14. Glue PART 8 each side 1 piece,
15. Cut and sand the collar.

16. Draw shoulder template,
17. Cut 5mm foam x 2,
18. Glue PART 15 each side 1 piece,
19. Cut and sand shoulder.

Pilot size:
H. 58mm
W. 46mm
D. 39mm

Weight: 2.23g
Glue: UHU por

My vector paper plane 7 years ago.
3mm foam
Wingspan 528mm
Long 563mm
Motor C1404 2900kv 9.6g
ESC 10A
Battery 2S 250mAh
Propeller GWS EP-4530
Weight 150g
Servo x 3 (pull-pull system)

flying wing like Horten build log & maiden flight (3 min 50 sec)

Wingspan 700mm
3mm foam
KFm-6 airfoil
Weight 83.25g (WO. Battery 17g)

Motor C1404 2900KV 9.6g
ESC 10A
Servo BLUE ARROW D05010MG 5.75g 1.2kg.cm x 2
Receiver ORX DSMX 4ch
Battery dualsky 2S 250mAh
Propeller GWS EP-5030