Alex Schauer's blog View Details
Posted by Alex Schauer | Sep 02, 2014 @ 10:03 PM | 16,643 Views
Hangar 9 Beast 60e (3 min 53 sec)
Huge thanks to VintauriRC for filming, editing, and uploading this for me!
Posted by Alex Schauer | Dec 18, 2013 @ 06:17 PM | 18,946 Views
Check out some of my threads and my other videos on this little sled.
Please subscribe!
(BTW, this year's model is going to be brushless. Better suspension and wheelies (AND 50+MPH!!)
R/C Nitro Snowmobile (3 min 58 sec)

Posted by Alex Schauer | Oct 19, 2013 @ 02:23 PM | 19,292 Views
Be SURE to watch the last two minutes for moments with Phil!!
3D Hobby Shop 74" Edge with Smoke (7 min 8 sec)

Posted by Alex Schauer | Sep 08, 2013 @ 07:11 PM | 17,771 Views
Posted by Alex Schauer | Apr 15, 2013 @ 05:31 PM | 19,119 Views
Posted by Alex Schauer | Apr 15, 2013 @ 05:31 PM | 19,105 Views
Just wish motor box kits were in stock...
I've fixed it up with some epoxy and CA and she is good until the MB ktis come back in stock!
Special thanks to Turnerm for sending me a new canopy and my neighbor for bondoing and painting my cowl
Posted by Alex Schauer | Mar 01, 2013 @ 10:14 PM | 20,035 Views
I have to credit Vintauri for these photos. He did an amazing job!
Posted by Alex Schauer | Feb 17, 2013 @ 09:43 PM | 20,300 Views
Finally published! Had a great time reviewing this little guy
Be sure to check your Electric flight subscription!
Posted by Alex Schauer | Feb 04, 2013 @ 06:27 PM | 20,791 Views
So as many of you may know I have created a Nitro Snowmobile. (Check my blog).
Now that that one has finally broke down, I've decided to the Brushless route now. Here are my reasons:
1. The plastic wont be weakened by absorbing the nitro oil byproducts
2. Quiter, the neighbors wont be mad
3. Low maintenence
4. Don't have to buy glow fuel
5. Much more power
6. Less of a starting hassle
7.Cleaner look

Using a Castle SideWinder SV2 with a 4 Pole 4600KV on 2S. I may try 3S someday

Below is everything that I have bought so far.
Will keep you posted.
Posted by Alex Schauer | Dec 28, 2012 @ 09:26 PM | 21,502 Views
Nitro RC Snowmobile
Heres a little running vid i made earlier today...nothin special
RC Nitro Snowmobile (1 min 9 sec)

Be sure to watch in 1080p
Posted by Alex Schauer | Aug 03, 2012 @ 09:48 AM | 24,011 Views
Alright, well here is my Nitro Snowmobile. I designed and built this. I had acess to my Dad's work's HUUUGGGE machine shop. And a warehouse full of materials at my disposal
It took me a whole year to get everything just right. It has an onboard glowstarter that can be enabled by a flick of a switch, headlights that brighten and dim as the engine accellerates, (stil working on taillights and turn signals) hobby grade shocks in the rear suspension and in the front.
I am hoping to get a front aluminum suspension made next summer and have it attached to the main aluminum chassis and tunnel that I made.
It has a HPI Nitro Star .15 that has been working flawlessly. Easy starts, good running. Just give it a little heat with the heat gun in the winter and pull about 3 times.
I usually use my Futaba 8Fg 2.4 for this RC, because it has 8 (14) channels for all of the accessories, and I don't see the point in buying a whole new 4ch pistol grip radio.

I am just using a standard S3003 servo, and it turns the skis with plenty of power.

The dirve train was the hardest part. I believe I need to add to it orstrenghten it/rebuild it. I am having too much spur gear wobble.

I am using a plain old .15 sized airplane muffler. No room for a pipe.
The airplane muffler provides plenty of power and I routed a tube from the muffler out where a normal snowmobile's tube would go, and it looks sweet and works great It also gives it a differen't sound, which is awesome!
I also wen't with the airplane muffler because it is quieter than a conventional tuned pipe. This way I can run it in my backyard without any noise complaints.

Edit: I realized that I really need to find a rider.

R/C Nitro Snowmobile (3 min 58 sec)
Posted by Alex Schauer | Aug 02, 2012 @ 08:06 PM | 21,770 Views
3DHS Slick Contest (5 min 1 sec)

Youtube screwed up the beginning a bit..if you realy want to see what the beginning is like I managed to get it posted. Visit my other videos and you will find it.
Posted by Alex Schauer | Jul 13, 2012 @ 08:51 PM | 21,846 Views
3DHS Slick (3 min 53 sec)

Posted by Alex Schauer | Jul 10, 2012 @ 05:08 PM | 20,433 Views
Posted by Alex Schauer | Jun 08, 2012 @ 07:09 PM | 22,432 Views
I was looking through the fence of the Cirrus Factory taking pictures, when a pilot comes and asks me if I want to come and see one! I said YES!!
Here are some of the pictures! He even let me sit inside!
In one picture one is taking off in the background!
I love Cirrus planes and want to be a pilot someday....
Posted by Alex Schauer | May 05, 2012 @ 02:26 PM | 22,655 Views
Posted by Alex Schauer | Apr 13, 2012 @ 09:53 PM | 23,580 Views
Look at recently visited
Posted by Alex Schauer | Apr 13, 2012 @ 05:50 PM | 23,475 Views
Was running my neighbor's (spektrumforever) Stampede off a ledge.
Pics taken from my iPod Touch, the quality is even better than my Canon!