Daryoon's blog archive for August, 2012 - RC Groups
Daryoon's blog View Details
Archive for August, 2012
Posted by Daryoon | Aug 21, 2012 @ 12:46 PM | 33,634 Views
When setting up your transmitter stick MODE on the FS-TH9x, Turnigy 9x, Eurgle, IMAX-9x, etc... you get prompted a question "THRO REVERSE?"

Here is how to answer it appropriately...

First, the steps to set your transmitter's MODE:

Go to [STICK SET ] in your System Settings. Select the Mode you fly, i.e. Mode 2. Press the menu button to set and go to the next screen.

When you get prompted "THRO REVERSE?"

menu button = YES
exit button = NO

The following is info pertinent to the WL Toys v929...
The way you answer the above changes the way you set the Throttle Channel.
  • If you hit the menu button to answer YES, then in the [REVERSE] menu, you have to set both your Elevator and Throttle to reverse. Just like the YouTube video said to do.
  • Now, if your answer to that question was NO, using the EXIT button. Then in the [REVERSE] menu, the only channel you needed to reverse is Elevator. Throttle should be set to normal.

For confirmation, I just checked on my Turnigy 9x with er9x firmware. The only channel I had to invert/reverse to fly the v929 is the Elevator channel.

Hope that all makes sense. And for the rest of the community, we need to be careful on how we instruct new Turnigy/TH9x user who's trying to program their radio for the v929, v911, etc. Whether the throttle channel needs to be reversed depends on how they answer the "THRO REVERSE?" question during stick mode setup.
Posted by Daryoon | Aug 12, 2012 @ 04:25 PM | 27,033 Views
I made a blog post on magnet wire here with some trips on using magnet wires.

Click on this link for the full post on the topic: Magnet Wire Tips and Tricks