RAMMER JAMMER's blog View Details
Posted by RAMMER JAMMER | Jul 22, 2015 @ 07:38 PM | 1,532 Views
In the process of attempting to remove two small phillips head screws from the spinner on my flyzone Beaver, I have burrd them out and cannot remove.
Any ideas ?
Posted by RAMMER JAMMER | Jul 21, 2015 @ 09:53 PM | 2,161 Views
Could anyone enlighten me on the differences in the abovel
Posted by RAMMER JAMMER | Nov 13, 2014 @ 12:56 PM | 2,174 Views
If the loop becomes detached from one side of the plug, does this affect the
binding potential once plugged into the receiver ?
Posted by RAMMER JAMMER | Oct 30, 2014 @ 08:15 PM | 2,608 Views
Is it possible to bind the referenced two without the AnyLink software ?
Posted by RAMMER JAMMER | Jan 29, 2014 @ 08:01 PM | 2,466 Views
Have always wondered exactly what are the differences between the two prop designs ?
Posted by RAMMER JAMMER | Nov 27, 2013 @ 12:30 PM | 2,760 Views
Have finally maidened my dynam waco ymf5d-trimmed out-flies great !
ARF came with 12 X 6 props which am using but also purchased a 13 x 6 wood
prop- thought it would look cooler.
Tested amp draw (stock 40amp ESC) at full throttle with 12X 6 props and pulled
38 amps.
Question: Would 13X 6 prop overload ESC.
Posted by RAMMER JAMMER | Oct 20, 2013 @ 07:13 PM | 2,720 Views
About a month ago, I ordered a Dynam plane from the above dealer on a Monday
via UPS with it arriving the following Thursday ! Excellent service !
During assembly determined that I wouild need 4 cell batteries plus receiver which
I ordered from them almost three weeks ago having had good experience with my
initial order.
After numerous attempts to contact them via their "contact us- ticket system" and phone I had almost given up when I decided to try one more phone call. A young
man answered and , after I gave him the order #, indicated that the order would
be sent our that day- exactly two weeks after the order was placed and their having
debited my account.
It has been almost a week after this occurred with no goods being received.
If any of the ordered items were out of stock, all they had to do was advise me-nothing.
Any suggestions would be appreciated.
Posted by RAMMER JAMMER | May 05, 2013 @ 04:51 PM | 3,016 Views
Have become increasingly interested in purchasing the referenced but with all the negative comments i have read concerning dealers who carry it, i.e. Grayson, killer planes, red rocket hobby, etc. Could someone please recommend a u.s. Based dealer who is trustworthy, knowledgeable, etc.
Posted by RAMMER JAMMER | Dec 26, 2012 @ 08:35 PM | 3,240 Views
Just received Flyzone's new DHC-2 Beaver for Christmas.
Can I use a Spectrum AR500 receiver in lieu of one installed ?
Posted by RAMMER JAMMER | Jun 06, 2012 @ 03:14 PM | 3,160 Views
Have considered ordering either planes and/or parts from the above but have some negative feedback from some of my r/c club members.The most recent being from a good friend of mine who order a FMS T-28 which arrived with broken nose gear. It has taken him almost a month to get them to repond !
Please advise .
Posted by RAMMER JAMMER | Apr 26, 2012 @ 02:40 PM | 3,321 Views
Has anyone been able to use a 2 blade prop for the referenced ? If so, what size and brand ?
Posted by RAMMER JAMMER | Apr 04, 2012 @ 02:50 PM | 3,192 Views
Had to order replacement retracts which arrived in retracted position. Damaged retracts are currently in retracted position. I can cycle current retracts to down position to open gear doors then remove old gear. Due to new gear being in retracted position will they sequence properly once installed ?
Posted by RAMMER JAMMER | Mar 29, 2012 @ 12:43 PM | 3,085 Views
Nitro planes is out of stqck for hub and blades for the referenced. Does anyone know of an altenate source ?
Posted by RAMMER JAMMER | Feb 07, 2012 @ 08:58 AM | 3,664 Views
Have been unable to gain any response from Nitro Planes concerning the above.
Whiskers gave some good advice last week which I have not yet tried.Has anyone else run into this ?
Posted by RAMMER JAMMER | Jan 25, 2012 @ 03:34 PM | 5,410 Views
Question about Airfield 1400mm Corsair ARF:
Accompanying ESC Manual advises for first time power up of ESC to set throttle at MAXIMUM then connect battery. Do I do this in conjunction with initial bind?