* Fit the power lights in position suggested in the above diagrams by drilling holes in the fuselage and fixing the lights with 2 part epoxy. Extension leads are available for larger fuselages/wings. Fit the power light unit into your model away from vibration.
* There are two switches. One is for the operation of the lights and one is for the optional landing lights. Fit the switches so they are accessible from the outside of the model. Included in the unit are two spare plugs into which the optional landing lights can be fitted. The power for the lights can he from either a spare battery pack 4.8v to 9v or from your receiver pack.
* Although these lights use little power we suggest you always fit a battery monitor to your receiver and check the state of your battery before flight. Do not use the power lights if you have low battery power or if you are unsure of the state of your flight battery. Always program fail safe into your receiver.
* 2 x Red Beacon
* 2 x White strobe
* 1 x Red & Green Navigation Light