EyeFlyPlanes's blog - RC Groups
EyeFlyPlanes's blog View Details
Posted by EyeFlyPlanes | Jul 05, 2009 @ 02:43 AM | 5,862 Views
Updated 3-20-2010

I am currently building a Twinstar 2 as of Sept 2, 2010.

Twinstar 2 FPV Build Log...

It has following gear in it...
2 Turnigy 35-30 1700kv motors with 7x5 props
2 Hobbyking BlueSeries 40a ESC's
4000mah 20c 3 cell Flight pack
1300mah 20c 3 cell Vid, OSD & Cam batt
Castle BEC
HS-5065MG with 180deg digitally altered for pan
Hitec HS-5065MG for Tilt
HXT900's for all other servos
Dragon OSD with RTH & built in GPS stabilization
Radio Shack mic (behind the wings)
Camera - DX 201 with 3.6mm lens
(Retired as of 3-01-11) 3.6mm KPC-VSN505 w/ 3a Turnigy BEC back to 12v
(Retired as of 12-17-10) 540tvl Cam with DSP
1.2 Ghz Lawmate 1000mw 8ch Selectable w/ inverted V
OMM Low Pass Filter - For 1.2ghz system & GPS lock
(Retired as of 12-17-10) 900mhz 500mw VTX wth Inverted V on Ch 3
FY20A Gyro & accelerometer
Dragon Link R/C system

Futaba 9 Cap with DragonLink LRS
Lipo for power

Ground Station:
1.2ghz Lawmate Rx & 8db Patch Antenna
Primary Monitor - Element 22' LED TV
(Retired as of 12-17-10) 900mhz RX from Dino Direct with 8db Patch Antenna
(Retired as of 02-02-11)Anyvolt Micro for stepdown power to Aiptek & video goggles
Video amplifier
Aiptek MPVR+CB (for 720x480 recording)
(Retired as of 02-02-11) R-vision Goggles with Ski Goggle Mod (redone - new pair)
(Retired as of 02-02-11) Craig 15" TV
12v power from my cars electrical system.
...Continue Reading