pulsery2k1's blog - RC Groups
Shop our Airplanes Products Drone Products Sales
pulsery2k1's blog View Details
Posted by pulsery2k1 | Sep 07, 2016 @ 11:32 PM | 3,919 Views
After very good results on my last scratch built twin 50 MM jet
I'm building a large more aerodynamic version from the success
it will include some exciting new building products from FOAM-TAC
that will help to build a lighter but stronger model.
wing span 54 in 56"long ,power by 12 blade CS fan with a 1680 kva
motor - empty weight 64 oz
designed to fly on 4s-6s lipo

F 90 SPORT JET (3 min 35 sec)

Posted by pulsery2k1 | Jan 20, 2016 @ 11:17 AM | 9,786 Views
Looking at my Blog it seems its been 4 years since my last entry.a lot has happened. Lives change some good things have happened
and some bad things . for the last year and a half I been sick and life has come almost to a stand still . starting to make a little progress into getting better. not much flying or building , now selling my home almost all my models are gone. except a couple of little 50mm BEA hawks I have found they are not only easy and fun to fly but I enjoy them . since I started building and designing models over 55 years ago modeling and designing have changed quite a bit.I had met someone who filled my life with a new hope that anything is possible at any age . so while I await selling my house and slowly start to feel better I was asked to design a easy to fly EDF trainer with all the new jets a good trainer was needed . I decided to build something completely new A sexy modern looking model with good handing ,easy to fly for first time EDF pilots but still have the good looks . I will call in Angel 1 Angela after a very beautiful and sexy woman I know.today most design on the computer and build - I decided to go as I learned long ago take my idea build a mock up glider then work out all the necessary changes and build the flying model -then draw the final plan
Angel 1 RC 70 mm Trainer (3 min 9 sec)

ANGEL 1 RC F 70MM (5 min 22 sec)
...Continue Reading
Posted by pulsery2k1 | Nov 08, 2012 @ 11:08 AM | 7,489 Views
One of the best things about Modeling , is you can scratch build your
own designs . in the real world you can't just go to boeing and say I'd
have a great idear and would like to design your next great airplane.

But in modeling you can take you dream from drawing board to
Flying field , and the feeling of seeing your design's fly ,to me is
what this hobby is all about - FUN . I've building and flying models
over 50 years from free flight /u control to RC , one of my first
designs was a single channel Pulse model , I worked and learned
from a great RCer Ken Willard .

your design can be simple to comlex or as most of us find ourself
doing we redesign or we kit bash some of our...Continue Reading
Posted by pulsery2k1 | Jul 22, 2012 @ 10:26 PM | 7,800 Views
just completed my Fly Fly Hawk using a new covering method called
glass light , In the past I have used Polyglass on foam , which is
water based polycrylic and tissue paper . but I have had great sucess
with this . but now with most Foam models being EPO foam
I had problems with the tissue lifting in the sun EPO like's to
bubble (aligator) in the hot sun so this time . I tryed heavy tissue
and finish cure 20 min epoxy mixed 75/25 with alcohol . the results
are excellent , the main avantage is its much lighter the old fashion
fiberglassing .

7/25/2012 Maiden Flight , sucessful , with minor landing accident
model flow in 12-17 mph crosswind

fly fly 90 mm on board (5 min 47 sec)

Posted by pulsery2k1 | Mar 25, 2012 @ 06:59 PM | 8,330 Views
20 blade 55 mm edf unit , using a 2628 2200 kv brushless motor
a 30 amps esc , produces 504 grams of thrust (static) at 20-22
amps from a 1000 mil 3 S 25 C lipo .
the test plane is a SKYANGEL T-45 that was repainted

Performance seem good from the video it has excellent vertical
and seems to be faster that the stock setup
jet /fan is very quite when compared to a stock set up

20 BLADE EDF TEST FLIGHT.wmv (4 min 47 sec)

Posted by pulsery2k1 | Dec 05, 2011 @ 01:04 PM | 8,221 Views
I'm building my second Windridder 737 , and trying to develope new
ways of finishing it to make it more scale:

But i alway's felt that this is supost to be fun , so I decided to take
a break for a quick fun project .

almost every flight of a 737 starts with a pushback from the gate
from a special tractor. so i thought why not build a pushback
tractor .

I looked in the junk pile and there was an old rc toy 4x4 truck
that would make the perfact bed for my little project.
this is more my own design that what real one look like but it was

Push back tractor.wmv (0 min 33 sec)

Posted by pulsery2k1 | Oct 17, 2011 @ 11:13 PM | 9,090 Views
back in the 70's while living in San Diego , I did volunteer work building a flying copy of the spirit of St Louis. this was a great ,learning experience
sadly there are too few skilled builder's left , so it was great to work
with these men. Claude Ryan the original builder helped also.
one of the hilights was a visit from Jimmy Dolittle - and a chance
to talk with him....Continue Reading
Posted by pulsery2k1 | Sep 23, 2011 @ 08:07 AM | 8,813 Views
Nitro planes Dynam DC-3

a very nice version of the famed Douglas Dc-3 the entire model
is covered with tissue and Miniwax Polycrylic
Posted by pulsery2k1 | Apr 15, 2010 @ 07:58 PM | 10,254 Views
My beautiful Boeing 737-700 finished with tissue and WBPU
just return from being displayed and doing demo flights
at the N E AT fair the model was a very big hit,
easy to fly with great looks