Shop our Airplanes Products Drone Products Sales
mjnco's blog View Details
Archive for January, 2013
Posted by mjnco | Jan 27, 2013 @ 10:39 PM | 2,248 Views
Maiden flight. CG at 4" per manual. I am expecting flight times in excess of 15 minutes per charge.

H9 Sopwith Camel (4 min 12 sec)

Posted by mjnco | Jan 27, 2013 @ 10:24 PM | 2,242 Views
This arf was put together a couple of years ago minus motor install. Just got around to finishing it this January. I had to use some of the lead provided because I didn't want to cut into the cowl.

HobbyKing G60 300kv motor
APCe 20-13 prop
Align 70A esc
6V 2000nimh battery pack for receiver
2 HobbyPartz 3S 4000mah 25C lipos in series for 6S
Posted by mjnco | Jan 25, 2013 @ 11:42 PM | 2,453 Views
Touch and go's. Sound now in sync with motor speed. Next test is to reposition speakers to fire out the windows instead of into cabin.
This flight lasted a total of 15 minutes. I should be able to fly at least 20 minutes on one charge. Not used to that with my electric planes !

Super Cub touch and go (9 min 41 sec)

Posted by mjnco | Jan 23, 2013 @ 10:35 PM | 2,384 Views
Flying around about 1/3 throttle. Sound system still not right.

H9 Super Cub (6 min 7 sec)

Posted by mjnco | Jan 20, 2013 @ 09:42 PM | 2,037 Views
Short videos of Cub on maiden flight. I was interested in how this Cub landed. Stayed straight on landing with no tendency to want to ground loop. Sound system needs some work since it is my first attempt using one.

HobbyPartz MonterPower 160 motor
20-10 APCe prop
CC 120 HV esc.
Turnigy 5000 mah lipos 40C. 6S+4S for 10S
MrRCsound pro B sound system version3 with 2 speakers installed in cockpit area.

H9 Super Cub a (0 min 38 sec)
H9 Super Cub (0 min 30 sec)
...Continue Reading
Posted by mjnco | Jan 15, 2013 @ 08:19 PM | 3,068 Views
Might have to reread the instructions! Something just doesn't look right.
Posted by mjnco | Jan 11, 2013 @ 11:46 PM | 2,126 Views
More slow flight.

Habu32 slow (1 min 29 sec)

Posted by mjnco | Jan 07, 2013 @ 09:41 PM | 2,071 Views
This flight during landing phase showing more nose up attitude and a little slower than previous flights.

Habu32 edf (4 min 51 sec)

Posted by mjnco | Jan 05, 2013 @ 12:25 AM | 2,476 Views
Simple motor mount for Hobbypartz Monster 160 motor. Used metal spacers from kit with 3 (1" spacers from Ace Hardware) per leg. This puts spinner backplate about 1/2" further forward than stock position. Should help with CG when floats added.