RcSuperSales-Net's blog - RC Groups
RcSuperSales-Net's blog View Details
Posted by RcSuperSales-Net | Apr 17, 2009 @ 10:47 PM | 5,021 Views
Well I am pretty excited I just got in some new batteries. The new Hyperion Line and we will be carrying a limited supply of Zippy Flightmax Li-PO's.

Here are the new G3 Hyperion Li-PO's, and if they live up to their claim I think these will revolutionize the Li-PO market. Imagine li-po's lasting 800 cycles! That is craziness and would be awesome! Especially at these prices. Here they are check them out and let's hear yoru feedback on them. Also here is the RC Groups thread: https://www.rcgroups.com/forums/show....php?t=1032164

Hyperion Li-PO's

I also decided to start carrying the Flightmax Li-PO's and though of course the price will be higher than getting them directly from China they will still be a bargain and you won't have to wait weeks for them if you live in the U.S., only a few days. Also you will be able to trust you are getting these from a reputable seller and we check all the batteries as well for voltage and such. Check them out here:

Zippy Flightmax

Let me know if you have any questions!

Posted by RcSuperSales-Net | Sep 26, 2008 @ 01:46 AM | 5,295 Views
Just busy getting ready for the move to Montana so I can finish up my flight training and start my Full Scale heli company in a few years.

I always hate the packing up part, luckily my wife is taking care of most of that while I continue to work.

Just put up a new combo on the site that will hopefully help out some new and future Swift 550 pilots get started while saving them some cash. Check out my post here on RCG about it: https://www.rcgroups.com/forums/show...0#post10622786. Also here is the direct link to it on my website: http://store.rcsupersales.net/servle...-CARBON/Detail. Hope everyone is doing well and having fun flying.

Happy and safe flying!

Kyle Allred
Posted by RcSuperSales-Net | Jun 14, 2008 @ 02:05 PM | 5,823 Views
Hey all see the latest post for details on the New Outrage G5 helicopter. https://www.rcgroups.com/forums/showthread.php?t=879427.

Also here is my latest video after not flying since my last video and crash in Feb. Still a bit rusty but steadily improving. School and the business are taking up most of my time at the moment so not a lot of RC Heli flying going on. I did however just receive my Instrument rating in Helicopters and now I am finishing up my commercial license.

Moving to Montana soon so if there are any fellow pilots out there hit me up as I will be moving to the Kalispell area this summer. I will be training in Scweizer 300's over there, looking forward to flying something other than the R22.

My next video will be of the HDX 450 as that thing fly's like a dream. Still working on building the Swift 550 and then an Outrage G5 after that. Happy and safe flying!

Honey Bee King 2 V2 Loops, Rolls, Flips, on a windy day. (4 min 31 sec)

Posted by RcSuperSales-Net | Feb 27, 2008 @ 12:36 PM | 6,749 Views
Hi Everyone,

It has been a while since I have been posted. Been busy with so many things including updating the look of the site. Let me know what you think about it. www.RcSuperSales.net Here is my first and latest video of me flying the Honey Bee King 2. Enjoy and take care.

Honey Bee King 2 First Loops www.RcSuperSales.net (5 min 24 sec)

Mini-Review / Posted by RcSuperSales-Net / Oct 10, 2007 @ 12:14 AM / 6,471 Views / 1 Comments
An infraction has been issued for this post.  Infraction type: Excessive Advertising (Over-competition)
Mini-Review / Posted by RcSuperSales-Net / Oct 10, 2007 @ 12:10 AM / 6,417 Views / 0 Comments
An infraction has been issued for this post.  Infraction type: Excessive Advertising (Spam)
Posted by RcSuperSales-Net | Oct 10, 2007 @ 12:09 AM | 6,471 Views

Posted by RcSuperSales-Net | Oct 10, 2007 @ 12:08 AM | 6,441 Views
Here are some of my most recent posts. Hope they can help some people out .


Originally Posted by Go4milesPa
ok its late early well whatever im not sure on a stock esky hh gyro but on the tele if u leave the wire off its always in hh mode
Not quite, but close . On the telebee Gyro you have your gain pot on the front of the gyro. Well if you turn that dial so it is below 50% you are now in Rate mode. Above 50% and you are now in heading lock mode though you would not run it that low. Essentially you want to set your heli up in Rate mode first before even trying to set it up in Heading Hold mode. There are plenty of threads on how to do that on here so I won't repeat it . After you get it set up in Rate mode then get it set up in HH mode. That extra plug with the one wire is so you can plug it into an open spot on your receiver like the gear channel or aux 2 and remotely adjust your gain with your transmitter. Unfortunately you cannot do that on the stock transmitter so do not plug it in on your stock receiver. The little gyro switch on the stock transmitter is basically worhtless. Because if you plug in that wire on your receiver then you will be able to switch between Heading lock and rate mode but when you turn the gain pot dial on the gyro, it will not work. So just leave it unplugged if you are running the stock transmitter, get it set up in rate mode first, then go back and set it up in Heading Hold mode. You will not want to run anything else once you have that set up correctly . Good luck.

Posted by RcSuperSales-Net | Oct 09, 2007 @ 10:29 PM | 6,463 Views
Hi fellow flyers. Thanks for visiting my Blog. Visit my Site at www.RcSuperSales.net for some killer savings. Also everyone gets a discount at Rc Super Sales. Enter in promo code HBK2RCG10% upon checkout for a 10% discount off your entire order. You can only use one promocode at a time and you must register on the site in order to use the code. We are constantly adding new products daily so look out for a lot more to come. Please let me know if you have any questions, suggestions, or you need help with anything. I am just a phone call or email away. Take care. Happy and safe flying!

Kyle Allred
Rc Super Sales
Email: Questions@RcSuperSales.net

Look for a new Customers Pictures section on the site soon. I'll keep you posted.