goldenite007's blog - RC Groups
goldenite007's blog View Details
Posted by goldenite007 | Jan 22, 2009 @ 02:22 PM | 3,184 Views
Posted by goldenite007 | Jan 12, 2009 @ 12:33 PM | 3,437 Views
(all my photos execpt for the german shephards and smilies poking box )...Continue Reading
Posted by goldenite007 | Dec 26, 2008 @ 08:10 PM | 3,531 Views
OK for science olympaid I need to power a 6 AA battery(9V) device with 4 AAs(6 V) Do I just get one of the metal Tranformer coil things and wind the secondary coil with 3/2 as many coils as the primary coil?
Posted by goldenite007 | Dec 23, 2008 @ 09:29 AM | 3,928 Views
Here is a lamp I did (airport theme). It has LEDs on the runway, helipad, and control tower. The lamp is either on or off, and there is a master switch on and off (so either the LEDs are on or off, and the LEDs have to be on to have lamp on.... )
Posted by goldenite007 | Dec 03, 2008 @ 07:21 AM | 4,412 Views
Sorry the songs the same, Going to fix soon.
At the end of the first vid I blow out candles with my mCX
german shepherd attack! and fetch and playdead. (2 min 23 sec)

Posted by goldenite007 | Nov 26, 2008 @ 07:40 PM | 4,292 Views
These are my christmas lights as of 30 mins ago. Yes that is santa on the roof.
The polar bear was an inflatable indoor thing I moded with a lightbulb inside.
The heli is a $23 piccoz knockoff from Kohls.

BTW my family is shocked I put up lights before thanksgiving, but I didnt want to do it in the cold/snow
Posted by goldenite007 | Nov 20, 2008 @ 04:38 PM | 4,027 Views
Last weeks indoor flyin
Indoor flyin with 10 vapors, and mCXs on aircraft carrier (4 min 43 sec)

AWESOME RC PLANE EXPLOSIONS (no rc gear present at time of launch)
Blowing up planes with Fireworks (0 min 22 sec)
...Continue Reading
Posted by goldenite007 | Nov 16, 2008 @ 02:10 PM | 3,922 Views
Designed by : Foam and Tape
Flown: Me and ^
PS watch the very end to see F&T jump over the house to a shed
Posted by goldenite007 | Nov 05, 2008 @ 04:21 PM | 3,887 Views
Sorry for the part in there with the ground. If I had noticed I would have deleted...
Next look for my upcomming Thrust Vectroing Vtailed VPP design Same basic design, but will be able to hover upsidedown!
Posted by goldenite007 | Oct 05, 2008 @ 03:08 PM | 4,327 Views
Pict b4 crash
Was flying high inverted, lost orentation, dove into tree, had to rip apart to get down...
Got every piece back execpt for some paniowire and control horn(with EZ connector) from one aileron . How does that happen lol
All hardware fine
I took apart the remaining pieces so I can attepmt to retape to make a plan....
Pict is after the crash and the pole I got it with (it was in the very top of Tree)
Posted by goldenite007 | Sep 29, 2008 @ 03:58 PM | 4,440 Views
Took about 13 days for LEDs and 3 for motor
150 (each) red and blue 3mm leds and 175 white 3mm
With 7.2v resisters for all (425)

Also NIB Park 400 from ebay for my Lazy bee
Posted by goldenite007 | Sep 22, 2008 @ 06:50 PM | 4,450 Views
More picts
We won that Mayhem in a contest, but Havnt gotten around to using it. Probably going to buy a really good brushless ...Continue Reading
Posted by goldenite007 | Sep 20, 2008 @ 05:53 PM | 4,438 Views
I finally hit the 100 post entry after over a year!!!!!
That means I can finally Ask for an ELECTRIC COMBAT THREAD!


JK, im just going to buy stuff online