edge5foamy's blog - Page 3 - RC Groups
edge5foamy's blog View Details
Posted by edge5foamy | Aug 19, 2007 @ 02:20 AM | 3,701 Views
Finally, after having to wait 98 days(waiting for new Tx to arrive), I finally got to fly, and maiden my Ikarus SuperStar Shocky.

Its not my greatest flying, but it was a little windy, it was my first time flying after 98 days, and it was the maiden flight. So anyway, here it is.

Ikarus SuperStar Shockflyer maiden flight. (4 min 58 sec)

Posted by edge5foamy | Aug 12, 2007 @ 12:37 PM | 4,264 Views
Here is the new video from ZeroGravity.

Posted by edge5foamy | Aug 09, 2007 @ 01:23 PM | 3,494 Views
8 Months, 22 Days, and counting!
Posted by edge5foamy | Aug 08, 2007 @ 05:10 PM | 4,956 Views
Well, I have been waiting a LONG time for a Pitts Python this size to come out, and ZeroGravity has done it! I am the 2nd person on the pre-order list, and I should have mine in October.

I plan on using this setup

Vampowerpro 650watt BL motor

E-flite 60A ESC

4x Vampowerpro digital servos

Futaba 2.4GHz 6ch Rx

Vampowerbatts Platinum 25C 3300mah 4s

Still need to decide on BEC(I am open to any suggestions)

Here is the link to the thread, https://www.rcgroups.com/forums/showthread.php?t=710402

Here is the new video, http://www.youtube.com/watch?v=SdEz8VGGgsw

Here is the old video
Pitts Python (4 min 9 sec)
...Continue Reading
Posted by edge5foamy | Jul 20, 2007 @ 09:07 AM | 3,274 Views
Well, it has been 64 days since I was last able to fly, I have since been without a radio, or a place to fly. This weekend my parents are going to go sign the papers on a new apartment that is about 100 yards from a public soccer field where I will be able to fly, I also won a new Futaba FASST 6ex on ebay, and I should receive it in about 2 weeks. So in 2 weeks I will be living in a new apartment that will be ALOT better than the dump we have been living in, and I will be able to fly again I currently only have a Shockflyer SuperStar running, I have a flying wing project I am working on though.

I will try to post pics of the new crib after we move in, and once I get to flying that Shocky there will be alot more videos on here.
Posted by edge5foamy | Jul 04, 2007 @ 08:55 PM | 3,254 Views
Here is the new Official Edge5foamy logo.
Posted by edge5foamy | Jul 03, 2007 @ 06:50 PM | 3,130 Views
Here is my CX2. At the time the video was takin, I was still having to trim out the radio, so it is moving around alot in the video.

Anyway... Enjoy!

Some indoor flying with the Blade CX2. (1 min 55 sec)

Posted by edge5foamy | Jun 27, 2007 @ 04:45 PM | 2,982 Views
Ok, I just got a slideshow uploaded of my SEFF pics.

SEFF 2007 Slideshow. (1 min 8 sec)

Sorry that there are not any vids, just pics. I lost the tape that had the SEFF videos on it.

Anyway... Enjoy!
Posted by edge5foamy | Apr 24, 2007 @ 10:35 AM | 3,315 Views
Here is the Tribute FX 3D video! I hope you enjoy the video.


Tribute FX 3D from E-flite (4 min 1 sec)

Posted by edge5foamy | Apr 22, 2007 @ 06:26 PM | 3,607 Views
Here are the pictures of my Tribute FX 3D from E-flite! I will post a video tonight. Enjoy.

Posted by edge5foamy | Apr 18, 2007 @ 05:43 PM | 3,618 Views
This is my Blade CX2. If you are wandering how I made my tail bom, I just took a piece of carbon fiber that I was using as a motor mount for my Park 300 (the Park 300 is for sale, $35 shipped), then I got a carbon fiber rod, drilled a hole in the round piece of carbon fiber, stuck the rod through the hole, grabbed my CA, and accelerator, glued the rod into the carbon fiber piece, then glued it on to the Blade, I was finished. I also figured out another way of getting your canopy to stay on, I kept on having problems with the little rubber things coming out of the canopy, so I just put the canopy on, then slide the rubber things on the outside of the canopy to hold it on. Check out my pics below.

Posted by edge5foamy | Apr 13, 2007 @ 05:31 PM | 3,519 Views
Here is the video of the maiden flight on my Ultimate FX 3D, I ran it on a Park 400, Thunderbird 18, Vampowerbats 1050 mah Li-Po 3s, Berg 4L, and 3 s-75 servos. Here is the URL,
Maiden flight on my Ultimate FX 3D from E-flite (4 min 0 sec)

Enjoy, edge5foamy
Posted by edge5foamy | Apr 13, 2007 @ 12:38 PM | 3,649 Views
I am planning on doing a build blog when I build my Tribute Fx 3D. I will be running it on a Park 400 4200kv inrunner, a vampowerbats 1320 mah Li-Po 3s, a vampowerbats 6ch receiver, and HS-55 servos. I should be getting my Tribute Fx 3D next weekend. I will keep you updated.

Posted by edge5foamy | Apr 12, 2007 @ 08:19 PM | 3,714 Views
I love to fly airplanes, and my Blade cx2. I fly at Dennis Hobbies in Eastman< GA with the Middle Georgia Flyboys. My airplanes currently include a Ultimate FX 3D from E-flite, a Piper J-3 Cub from Flatouts, a Edge 540 from 3dfoamy.com, and soon I will have a Tribute FX 3D in my hanger too. You can see some pics of my airplanes below, and I will post some pics of my cx2 this weekend. If your are ever in middle GA, you need to come fly here at Dennis Hobbies, its kinda hard to find, but its an awsome field with an actual runway, and taxiway, not just a grass field. And about 50 feet from the runway is the hobby shop. In May of this year I am moving to Kiev, Ukraine to start a church there. I am trying to find out where the hobby shops, and flying fields are overthere, but I am not having any luck, so if you know of any then LET ME KNOW. Bryan Davison tought me to how to fly, and I gotta say that I got one of the BEST instructors out there. I cant wait till SEFF this year! Will thats about it for me, if your ever in middle Geogia contact me, we might go flying or something.