Hi DemonDriver Aka Christopher Here & I want to share with you How to build your very own Seagull-Bird from the Video Game Minecraft!
I give you basically the entire build and then the maiden flight at the end.
My Minecraft Seagull is so easy to build ANYONE can build it!
Here are the parts for this Minecraft Seagull:
3-4 20" Inch Long carbon fiber rods.
3-4 large sheet of Depron or equivalent foam
1 30-60AMP ESC speed controller
1 7-11Volt lipo Battery
1 750KV or up to a 2000KV brushless out-runner motor use a motor around 1-2 inch in diameter . . .if it too large it will make your plane too heavy!
3-4 11-20 gram mini servos, you can use heavier "standard" servos buy you must increase the wingspan larger than 48 inches to 96" inches
1-6, 8 or 10, 12 inch prop
No landing gear required . .but 2 1 or 2 inch diameter foam wheels can be used
Plastic hinges and speed connectors
I use a Futaba 7CAP 2.4Mhz Radio and FASST RX for this plane. But use any Radio you want....Continue Reading
Hello to all my fellow RC Builders, Flyers, & aviation enthusiasts! DemonDriver aka Chris here, I wanted to share with you the overall completion of my new main RC workshop and Brand new sanding shed. I my new Workshop I can work on 4 9-foot long airliners at the same time. or work on 2 Massive 12-14 foot airliners, or any warbird, or spaceships of the same size.
Hi RC Cargo Plane Fans Christopher-DemonDriver here . . . Today I'm testing The "Herck" AKA C-130 Hercules RC Cargo Plane, This is a Joint Project between me and Andy AKA Silverfox who is a CAD-CNC Master and with my scratch-building know-how and his CNC knowledge we are going to make a "Herck" Kit for you!
Hi to all my fellow RC Brothers & sisters, Chris here . . .I wanted to share the build video of my newest RC scratch-built project the "Bamboo-Demon" Bamboo RC airplane basically anyone can build on your own.
its a long 4 hour video but if you follow along with me you can build your own Bamboo RC airplane.
The Maiden flight is at the 4:14:10 mark of the video.
Hi There to all My Star Wars Brothers & sisters! DemonDriver AKA Christopher here with yet another scratch-built RC Star Wars Tie Defender Imperial Starfighter! This is All Hand-made from Super-lite Styrofoam reinforced with Carbon fiber. I'm using a Modified Mid-sized Parrot style Quadcopter painted dull grey. I had a slight headwind that made that flight a tad bumpy in the Flight Video.
Its rather easy to build, and a change of pace from all the RC Tie Fighters out there, I'm pretty sure this is the Very 1st RC Tie Defender ever made.
Hi There to all my RC Brothers & Sisters Here on RCG, DemonDriver AKA Christopher Here, And I wanted to share with you my Latest RC Scratch-build my new Hand made EVE Robot from the Disney Movie Wall-E! This is My Prototype Technology demonstrator for a fully Functional Flying EVE Robot that I will Turn This Robot into and The Eve Mark-2 will be fully animated and autonomous.
Eve's Body, Arms & Head are hand Crafted from Super-Lite Styrofoam and is then laminated with an epoxy resin hardener then painted with white appliance Paint. She utilizes a Medium Parrot-style qaudcopter platform, But will be upgraded to a Much more powerful quadcopter for the Eve Mark-2 upgrade.
This is what I hope will be a new Technology I'm trying to help Create, Merging Quadcopters with Robots to Make what I'm calling "Qaud-Bots"...Continue Reading
Hi DemonDriver AKA Christopher here! I'm dedicating This RC StarTrek Build of my RC U.S.S. Enterprise to TREKKERS EVERYWHERE!! We have to stick together and Love The StarTrek Universe! This is the Refit Enterprise from the 1979 Star Trek Motion Picture! My Hand-Made enterprise is Fashioned from Super-lite Styrofoam and is mated to a medium Sized quad-copter, I Maidened her in slightly high wind 10-15mph and her saucer section caught the wind so she's tricky to fly at times.
I hope to Build Most of The Starship Classes In StarFleet In the coming years!...Continue Reading
Hi There My RC friends DemonDriver here with Yet Another Star wars RC Project, Its My New Hand-Made BB-8 Astromech droid From Star Wars The Force awakens!
BB-8 is powered by a medium sized Modified quadcopter and Has a moving His Head and small arms....Continue Reading
Hi DemonDriver here and I wanted to share my latest Scartch-built Star Wars Star Fighter The Y-Wing Star fighter Quadcopter, I made the Y-wing from super lite-weight Styrofoam and mated it to a medium sized Quadcoper. She really flies Nice as you can see! almost looked real at night! enjoy!
I'm always Honored to post my new Projects here On the GREATEST RC Forum On earth RCGROUPS!...Continue Reading
Hi DemonDriver here & I wanted to share my latest RC Quadcopter Scratch built Project, The Atreides Ornithcopter From the Hi 1984 Sci-Fi Masterpiece Directed by the Legendary Director David Lynch!...Continue Reading
Hi to all my friends here on RCG! Here is my latest scratchbuilt RC fighter jet project the Black Tiger space fighter from Star Blazers AKA Space Cruiser Yamato. . . . These little beauties are powered by a 50mm DR. Mad thrust edf unit optimized from the 4 cell 14 volt lipo . . It puts out 1.2lbs of thrust and the tiger weighs in at 1.5 lbs in the air. . . After the short maiden flights it's now obvious a more powerful 64mm edf must be installed.
Both Black tigers are undergoing minor repairs and will be ready for more flights Soon. Enjoy!...Continue Reading