xinte's blog View Details
Posted by xinte | Apr 24, 2019 @ 02:59 AM | 1,072 Views
T-Motor F60 PRO II 2207 2350KV 2500KV 2700KV Brushless Electrical Motor For FPV Racing Drone DIY Quadcopter
Posted by xinte | Apr 24, 2019 @ 02:56 AM | 1,147 Views
Happymodel Sailfly-X 105mm Crazybee F4 PRO V2.1 AIO Flight Controller 2-3 S Micro FPV Racing Drone PNP BNF 25mW VTX 700TVL Camera

Presale,will be ready for ship during May15th -May 30th


Brand Name: Happymodel

Item Name: Sailfly-X 2-3S Micro FPV racing drone

Wheelbase: 105mm

Size: 95mm*95mm*50mm(without propellers)

Weight: 35g(without battery)

Weight:60g(with Original 3s 300mah Lipo battery )


Crazybee F4 PRO V2.1 AIO Flight controller 2-3s Lipo Compatible

The lightest 1102 brushless motor only 2.7g with double ball bearings

Light ,Powerful and smoothly

AIO 5.8g 40ch 25mw vtx / 700tvl camera with smartaudio

2mm carbon fiber frame with TPU 3d-printed canopy

Betaflight OSD support ,easy to get RSSI, Voltage ,current from your goggles(DSMX version no RSSI output)

Frsky version support both NON-EU and EU-LBT Frsky transmitter(EU-LBT need to update firmware to Betaflight 4.0( release date :2019-4-11)

Flysky version support both AFHDS and AFHDS-2A protocol transmitter

DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter

No RX version support external serial-bus receiver like xm+, crossfire, S-FHSS etc..

Full telemetry function ready (Frsky and Flysky version support)

Real Bind and Fly version

Compatible both for 2s-3s Lipo/LIHV
Posted by xinte | Apr 24, 2019 @ 02:52 AM | 1,029 Views
iFlight SucceX F4 12A Micro 2-4S Flytower Fly Tower Built-in OSD 200mW VTX 16*16MM Hole for FPV Racing Drone Quadcopter DIY Models

Specifications :

iFlight SucceX Mirco F4 fly tower, from the wing of the xing equipment. The Mirco F4 is a new, streamlined, three-layer tower structure that is highly integrated with new features, optimized for internal circuitry, and simple layout for a cleaner and cleaner wiring.

This is an F4 flying tower developed for small aircraft with a hole of 16*16. The pin is connected to facilitate the installation and maintenance of the flying hand. The flight control performance of the F411 microcontroller and the MPU6000 gyroscope are very good. Built-in programmable RGB LED interface, external LED, set LED color, function, status. The built-in OSD chip can monitor the flight status of the flight at any time. The overall cooperation with the image transmission can change the image transmission point, power, flight control parameters, etc. using IRC Tramp.

12A's four-in-one ESC pad semi-extended structure, does not take up space, and is stable, supports 2-4S battery input, lasts 12A current, BLHELI_S firmware, supports Dshot 600 and other protocols.

Figure transmission power PIT/25/100/200. Can use IRC Tramp to change the map frequency point, power, flight control parameters and so on. PIT mode allows you to plug in safely without disturbing other flying aircraft.

iFlight SucceX Mirco F4 fly tower, let your small aircraft also have strong performance!

Note: This flight control firmware is matek f411, only supports SBUS and DSM receiving protocols, does not support PPM protocol and does not support brush 4.0 firmware. Please pay attention to the connection wiring diagram when wiring!
Posted by xinte | Apr 24, 2019 @ 02:47 AM | 1,024 Views
iFlight SucceX F4 TwinG Flight Controller + SucceX 50A ESC 2-6s BLHeli_32 Dshot1200 4-in-1 Flytower Flight Tower for FPV Racing Drone Quadcopter DIY Models
Specifications :

FC Specifications
IMU:Twins IC2689,Twins Gyros built-in(SPI)
Blackbox:Blackbox logging device
5X Uarts(1 2 3 4 5)with build-in inversion
8X Dshot/Proshot/Oneshot output
8X individual ESC power/ signal pads
1X Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX
Smart audio & Tramp VTX protocol:YES(IRC Tramp)
WS2812 led Strip:YES
PDB Specifications
BEC:5V/3A cont

FC Firmware

Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm
SucceX 50A 2-6S BLHeli_32 Dshot1200 4-in-1 ESC

8 layers double-sided PCB board;
4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;
32bit FO51K86 MCU, 48mHz maximum clock speed;
TDK MLCC Low ESR ceramic capacitors;
Top grade NTMFS5C430NL MOSFET;
Rational layout, countersunk holes on extended solder pads to ensure PCB layer connection

Dimension: 43*39mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Supports 2-6S lipo input
STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware
Current sensor: Yes
Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.
Target: iFlight-BL32-4IN1

No additional capacitor needed up to 5S!
To encounter back EMF and ensure the longevity of your electronics, min. 220uF Cap 35V for 4-5S, 50V for 6S on your main lead!

Package included:
SucceX F4 TwinG FC+ SucceX 50A 2-6s BLHeli_32 Flytower
Posted by xinte | Feb 22, 2019 @ 03:30 AM | 3,623 Views
Jumper JP4IN1 CC2500 24L01 JP4-in-1 Multi-protocol RF Module Tuner TM32 Version OpenTX for Frsky/Flysky/Hubsan/Walkera

The Jumper JP4IN1 Module features the CC2500, NRF24L01, A7105 and CYRF6936 RF Chip modules all integrated on one board. This module can convert standard PPM signals form module equipped radios in to the RF protocols used by most radios in the market today (See RF Chip data below). This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or hacking to get running. The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low grade radios commonly included with most kits offers an night and day difference in performance. The Jumper JP4IN1 module is also up-gradable via USB input.

Working voltage: 6-9v
Working current: <=100ma
Operating frequency: 2.4G ISM band
RF power: +22DBM
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna)
Net Weight: 42g (including antenna)
Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
Firmware updatable: Yes, via USB.

RF Chip Data
Cyprus Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
Texas Instruments CC2500: FrSky, Futaba SFHSS
Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models
Posted by xinte | Feb 22, 2019 @ 03:28 AM | 3,286 Views
Gemfan 1635 1.6x3.5x3 40mm 1m Hole 3-blade Propeller PC CW CCW Props for 1103 1105 RC Drone FPV Racing Brushless Motor Spare Part Accs

Brand name: Gemfan
Item name: 1635 1mm hole 3-blade Propeller
Number of blades: 3-blade
Pitch: 3.5inch
Material: PC
Weight / G: 0.54G
Center hole diameter: 1MM
Paddle disk diameter: 40.8mm
Center thickness: 5.2mm
Maximum blade width: 7.46mm
Adaptation motor: 1103-1105 Recommended motor: 1103

Package Included:
4 or 20 x CW 1635 1mm hole 3-blade Propeller
4 or 20 x CCW 1635 1mm hole 3-blade Propeller
Posted by xinte | Feb 22, 2019 @ 03:22 AM | 3,470 Views
Happymodel 2S 300mah 7.6V XT30 Lipo Battery With Mobula7 V3 Frame for Mobula 7 FPV Racing Drone Quadcopter 75mm Bwhoop75 Brushless Whoop

Happymodel 2S 300mah 7.6V XT30 Lipo Battery With Mobula7 V3 Frame for Mobula 7 FPV Racing Drone Quadcopter 75mm Bwhoop75 Brushless Whoop

Package include:

1xMobua7 v3 frame

1x2S 300mah 7.6V Lipo Battery
Posted by xinte | Feb 22, 2019 @ 03:20 AM | 3,352 Views
DIY Drone Set Welded Crazybee F3 F4 Pro Whoop_VTX 5.8g 40ch 25mw~200mw VTX Turbo EOS2 Camera for Mobula7 Brushless Whoop Mobula7 Eachine TRASHCAN TC75
DIY Drone Set Welded Crazybee F3 F4 Pro Whoop_VTX 5.8g 40ch 25mw~200mw VTX Turbo EOS2 Camera for Mobula7 Brushless Whoop Mobula7 Eachine TRASHCAN TC75

Package include:

1x F3 OR F4 Flight Contorller

1x Turbo EOS2 Camera 2.1mm 4:3 NTSC (If you need other version,please inform us in advance)

1x Whoop_VTX 5.8g 40ch 25mw~200mw VTX

Please note that these parts will come welded,like the picture shows,thanks
Posted by xinte | Feb 22, 2019 @ 03:17 AM | 3,295 Views
4pcs/set Happymodel SE0803 0803 Motor 1-3S Brushless Motor CW CCW 12000KV 16000KV 19000KV 1mm Shaft For 65-85mm FPV Whoop DIY Parts for Bwhoop75 Brushless Whoop Mobula7 Eachine TRASHCAN TC75
Happymodel SE0803 0803 Motor 1-3S Brushless Motor 12000KV 16000KV 19000KV 1mm Shaft For 65-85mm FPV Whoop DIY Parts for Bwhoop75 Brushless Whoop Eachine TRASHCAN TC75

The motor with red Cable= clockwise CW
The motor with black Cable = counter-clockwise CCW

Item name: SE0803 1-3S brushless motor
KV options: 12000KV(2s-3s) 16000KV(1s-2s), 19000KV (1s)
Shaft Diameter: 1.0mm
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 3mm
Motor Dimension(Dia.*Len): dia 10.5mm*16mm
Terminals: JST1.25mm
No.of Cells(Lipo): 1-3S
Wire length(include connector): 40mm
Weight: 2.5g
Super tiny only 2.5g
Compatible for 1s-3s brushless whoop
Ball bearing and Bushing
Double E-clip design, prevent Motor bell to flying off
Good Dynamic balance

Pacakge included:
2PCS Motors CW (Red Cable)

2PCS Motors CCW(Black Cable)
Posted by xinte | Feb 22, 2019 @ 03:03 AM | 3,335 Views
Upgrade 75mm V3 Crazybee F4 Pro OSD 2S FPV Watch / Goggles RC Racing Drone Caddx Eos2 Camera 25/200mW VTX & RC Training Parts

Note, All versions are welded & assembled & tested before shipped from the factory. They are ready to fly.

However, this version belongs to the Professional Remote model , But not belong to toys. Therefore, customers still need certain knowledge and operation experience for such products. If you are not familiar with the product, please do not change any programming settings casually.

If you have any questions, please feel free to contact us. Our technical department will do our best to handle the problem for you.

Item Name: 2S 75mm V3 Upgrade Brushless Whoop FPV Racer drone BNF/RTF Versions
Wheelbase: 75mm

Frame Kit: V3 improvement frame , New design, more durable than V2 , with Mobula7 Led_strip mount hole (The drone not include the LED Strip, If you request, Please feel free to message us for quotation)

Version: BNF FPV Version (Compatible with Frsky) / RTF FPV Version (Compatible with Flysky) ( Optional)
BNF FPV Version: Not include Remote Controller, FPV Watch and FPV Goggles are optional

RTF FPV Version: (Only Flysky Receiver) Ready to Fly, With Remote Controller, FPV Watch and FPV Goggles are optional.

Receiver ( Optional):

Compatible Frsky Receiver
Compatible Flysky AFHDS/ AFHDS-2A Receiver

(If you want to choose the...Continue Reading
Posted by xinte | Oct 24, 2018 @ 03:26 AM | 8,105 Views
New LDARC TINY GT7 75mm / GT8 87.6mm Mini FPV RC Racing Drone Betaflight F3 10A Blheli_S 800TVL Cam 5.8G 25mW VTX 2S PNP BNF
Tiny GT7
Betaflight SPRACINGF3
4in1 ESC 10A BLHeliS
VTX:Q25OSD(25mW 16CH Smart OSD V1)
Camera:OV231(800TVL 150 NTSC)
Battery:7.4V 380mAh 50C(XH2.54)
Weight:40.5g(no receiver and battery)
Receiver:RX2A PRO,DSM2,AC900(S-FHSS+D16)

Betaflight SPRACINGF3
4in1 ESC 10A BLHeliS
VTX:Q25OSD(25mW 16CH Smart OSD V1)
Camera:OV231(800TVL 150 NTSC)
Battery:7.4V 380mAh 50C(XH2.54)
Weight:47.8g(no receiver and battery)
Receiver:RX2A PRO,DSM2,AC900(S-FHSS+D16)
Posted by xinte | Oct 24, 2018 @ 03:05 AM | 8,231 Views
Happymodel Mobula7 75mm Crazybee F3 Pro OSD 2S Whoop FPV Racing Drone Quadcopter w/ Upgrade BB2 ESC 700TVL BNF Compatible Frsky Flysky DSM2/DSMX Receiver

We will give you an extra 2 sets of paddles. There are 4 sets of blades (2 sets of red + 2 sets of black), one of which is installed on the plane, and the warehouse is shipped randomly with black or red.

Brand Name: Happymodel
Model: Mobula7
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone
Wheelbase: 75mm
Version: Basic Version / Standard Version ( Optional)
- The diffirence of them are the package charger.
Basic Version: USB Charger
Standard Version: 6-way Charger
Receiver ( Optional): Compatible Frsky NON-EU Receiver
Compatible Frsky EU-LBT Receiver ( XM+ Receiver)
Compatible Flysky AFHDS/ AFHDS-2A Receiver
Compatible DSM2/DSMX Receiver

Size: 98mm*98mm*36mm
Weight: 25.9g (without battery)

Crazybee F3 Pro Flight Controller Item Name: Crazybee F3 Pro FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Diffirent version having diffirent receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current...Continue Reading
Posted by xinte | Sep 13, 2018 @ 05:20 AM | 8,241 Views
New EMAX Mini Magnum II 2 F4 Flying Tower Flytower 4in1 OSD VTX 6S BLHELI 32BIT 35A Flight Controller for FPV Racing Drone Parts

Mini Magnum 2 F4 6S BLHELI 32BIT:
Introducing the next generation of the famed Magnum line, the Mini Magnum 2.
Next Generation ESC Board:
Featuring a 35amp BLHeli32 capable ESC board, current sensor, on-board capacitors, and capable of running 2-6s lipo batteries, no longer will there be limits to the capabilities of an all-in-one stack in this 20*20 formfactor.
Tuning, Easier than ever:
Engineered around an F4 processor with an MPU6000 gyro, tuning and perfect flight performance will be easier to achieve than ever. Including built-in programmable RGB LEDs, distinction between different builds and custom status updates offer a wide variety of customizability for any situation and requirement.

Remote channel control:
Ytilizing a newly engineered video transmission frequency controller, channel selection can now be programmed from an exrernal transmitter without On-Screen-Display, information regarding your craft will be easy to access while in flight directly on your video feed.

Proven Formfactors:
With all the electronics needed, assembled together in an accessible package, building a custom craft will only require a frame, camera, set of motors, and a compatible receiver.
Instalattion has never been easier, thans to the universal formfactor of the tower system.

Weight specification
Total weight: 17.21g
Flight controller
(OMNIBUSF4 Firmware)
MPU6000 accelerometer/gyro (connected via SPI)
On-board OSD
On-board Buzzer
Integrated 5V/3A BEC
Dedicated PPM/ Sbus receiver input
30x27mm board with 20mm mounting holes.

Continuous current 35A ( max burst 40A)
Supply voltage 2-6S Lipo( 1700kv Motor LIMIT for 6S )
BLHeli_32 firmware,support DSHOT,MULTISHOT,ONESHOT125
Top quality MOSFET
3oz high TG PCB board
32x37mm board with 20mm mounting holes.
Current Sensor

Frequency band:5658-5945MHz (FCC Compliant Channels / with HAM unlock)
TBS Audio Control
Transmit power:13dBm/23dBm(25mW/200mW)
Supply voltage:4.5V-5.5V
Antenna port :50Ω
Posted by xinte | Sep 12, 2018 @ 05:14 AM | 8,436 Views
XT-XINTE New Mini FPV Goggles 3 inch 480 x 320 Display Double Antenna 5.8G 40CH Built-in 3.7V 1200mAh Battery Should be the Cheapest FPV Goggles ,
what do you thinks of it?
Any cheaper one with same function and quality? welcome to recommend to me,thanks
Posted by xinte | Sep 12, 2018 @ 04:25 AM | 8,054 Views
10 Pairs AVAN Rush 2.5 Inch Props 3 blades Propellers CW CCW for Emax 1106 Motor Lipo 3S to 4S Babyhawk FPV RC Racing Drone Quadcopter Model
The Emax Avan Rush propeller 2.5x1.9x3 was designed for Babyhawk Race 2.5 inch conversion kit to maximize performance and flight time. This propeller is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s. A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Utilizing thicker airfoils greatly increases durability and stiffness. Most of the weight is centralized near the hub creating a low moment of inertia of 1.24 grams*square centimeter which in turn makes a very responsive prop.

The Avan Rush was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.

A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.

AVAN Rush 2.5 inch prop (2xCW 2xCCW) 1 set kit


2.5 inch diameter

1.9 inch pitch

3 blades

Inertial Properties:

weight: 1.4 grams

Moment of Inertia: 1.24 g*cm^2

Packing list:

10pcs*CW 2.5inch propellers

10pcs*CCW 2.5inch propellers
Posted by xinte | Aug 16, 2018 @ 01:15 AM | 8,195 Views
Snapper7 Brushless Micro 75mm 5.8G FPV Racer Drone 2.4G 6CH RC Quadcopter RTF 700TVL Camera VTX & Double Antenna Mini Goggles

Package include:
1 x Snapper7 Brushless Micro 75mm Racer Drone
1 x JMT LST-009 Double Antenna 5.8G FPV Goggles
1 x Flysky FS-i6 6CH 2.4G AFHDS 2A LCD Transmitter

This is RTF Version, Ready to Fly, All Assembly.

Drone Detail:

Mode Name: Snapper7
Wheelbase: 75mm
Size: 98.5mm*98.5mm*36mm
Drone Weight: 28g(without battery)
Betaflight support , multi flight mode: ACRO/AIR/ANGLE
Powerful Brushless motor and Smooth ESC
CNC aluminum alloy propeller guard
Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles
Adjust the settings and the PID of the flight controller via OSD
Full telemetry function ready
Head lights ready
Camera angle adjustable
Real Bind and Fly version
FPV Goggles Detail:

Double Antennas
Built-in 3.7V 1200mAh Battery
Support a key search frequency
RaceBand 40 channel Auto-Searching
Real-time video return 5.8G FPV Receiver


● Small size and light weight;
● Low power consumption, Working current 300~330mA;
● Double antenna reception to make the signal more stable;
● RaceBand 40 channel, Auto-Searching;
● 3.0 Inch 480*320 dot high brightness LCD screen;
● Built-in super sensitiveness 5.8GHz 40ch receiver, especially with RaceBand;
● Built-in 3.7V/1200mAh high-capacity Li-ion polymer Battery;
● Universal USB charging interface;
● Real-time video return, Very low time-delay;
● Bilingual menu in support of Chinese and English;
● Support external video signal input;
● Support AV signal output (Connect external DVR);
Posted by xinte | Aug 05, 2018 @ 10:00 PM | 7,715 Views
JMT TX600 25/100/200/400/600mW Switchable

48CH 5.8G FPV VTX Video Transmitter Module OSD Control for Mini Racing Quadcopter RC Drone


Item name: TX600 VTX
Output power: PIT/25mW/100mW/200mW/400mW/600mW switchable
Control mode: BFOSD control(RX)Button
BAT: 5V+
Video system: NTSC/PAL
Antenna: IPEX
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
(TX600's factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations
if you need to unlock the frequency.)

Size: 26*26mm(L*W),Hole:20*20mm
Weight: 2.3g

Package Included:
1 x TX600 VTX
1 x 5.8G Linear Antenna
1 x 6Pin Cable
4 x M2x5 standoffs 5mm tall Nylon
4 x M2 Nylon Nuts


- 25/100/200/400/600mw switchable
- Lightweight designed
- Build-in PIT mode
- Smart port
- Frequency lock on
- Clean fliltering , interference rejection ablity
- Won't interfere with other VTX while it's powering up in different frequency

Red area on frequency table is locked area! Please
follow your local laws and regulations .
Long press for 20s to unlock or reset all set up .Please re-power after unlocking.
We suggest the VTX and Camera work on the same 5V. Black means the light is on.

Precautions for use:
-Input voltage must be kept + -right
-Please choose antenna with good VSWR and DB if you replace, to get far transmission distance
Posted by xinte | Aug 05, 2018 @ 09:57 PM | 7,905 Views
Simonk Firmware 30A ESC Electric Speed Controller with 5V 3A BEC for 2 to 4s Lipo Battery

Get a Coupon code here


weight: 25 g

Input voltage:2-4S

Working current:30A

BEC output: 5V 3A