PW-Link
Product summary

The pw-link data transmission module is divided into built-in antenna and external antenna version. The built-in antenna version is only suitable for pix flight control near distance and regulate the use of the calibration parameters, and the external antenna version after a number of practical test and reasonable transmission distance is 450 meters. The use of computer mission planner ground station for a long time the connection test, average stability data the transmission signal is maintained at more than 90%. Because of its small size, long transmission distance, stable data, convenient connection characteristics, very suitable for small UAV data receiving several hundred metres.
PW-Link The whole communication mode is as follows:


https://www.aliexpress.com/store/pro...72b22faddTDi8o

BR
lindy

CUAV NEW CPDB drone power distribution board 5V for FPV Drone Quadcopter 4-8 axis VTOL power distribution board quadcopter

Feature:
Holding higher input voltage: 10v-60v (3s~14s battery)
Each is factory calibrated to ensure consistent current and voltage detection accuracy
More accurate current and voltage detection: voltage detection accuracy: +- 0.1V; current detection accuracy: +- 0.2A
Support higher power output current: 5A
Maximum (detection) current: 60A
Supports higher input voltage: 10v-60v (3s~14s battery)
Each is factory calibrated to ensure consistent current and voltage detection accuracy
More accurate current and voltage detection: voltage detection accuracy: +- 0.1V; current detection accuracy: +- 0.2A
Support higher power output current: 5A
Maximum (detection) current: 60A

if you need ,just order in our shop,dear

https://www.aliexpress.com/store/pro...4ded34a0NW4aZ1

WTR is cuav launched a new application in UAV ground station module for transmitting end WiFi transmission speed, the ground end of digital data into wireless WiFi data, realize the computer or mobile phone WiFi wireless connection UAV, instead of the traditional speed Bluetooth transmission module, to achieve a more reliable and convenient

FAQ common problems
WTR's WiFi name and password
SSID is cuav wtr_xxx (XXX is generated according to the internal MAC address)
WiFi password: cuavwtr666 (lowercase)

How to modify the WiFi name and password of WTR?
Modified by downloading the cuav hflight app http://fw.cuav.net/apk/HFlight.apk

Support baud rate type
Only 57600 baud rate is supported at present


Specification
wireless standards IEEE 802.11g,IEEE 802.11b
transmission speed 11g: Up to 54Mbps, 11b: up to 11Mbps
WIFI communication
distance
150-500 meters (depending on computer or mobile phone)
baud rate 57600
attended mode UDP:14550
channel range 1 - 13 (default 11 channels)
frequency range 2412 - 2472MHz
transmitting power 18dbm
WIFI type SMA TYPE
WIFI safety WPA/WPA2 security mechanism
communicating protocol Malvink+ pass-through
traffic rate 57600
working voltage 5V +- 0.25V
working current 100MA
working temperature -20 - 50�C
Operation humidity 10% - 90%RH (non condensing)
Storage Temperature -40 - 80�C
Storage Humidity 5% - 90%RH(non condensing)
Connector JST-GH 1.25mm 6P
WIFI Information
SSID CUAV_WTR_XXXXXX
Passwrd...Continue Reading

hi ,dear friend

who know what is it in it

Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City，Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/

welcome dear friend to our factory , thanks so much for visiting,dear

and for your gifts


Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City，Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/

wow, our new products come, please just have a look and check it the power function

High-precision positioning: Many drone applications require higher accuracy than traditional GNSS offerings, such as drone mapping, agricultural surveying, and high accuracy takeoff and landing.
C-RTK is a Real Time Kinematics module for mass market launched by CUAV. The complete RTK system can be composed of two C-RTK modules (one for aircraft and one for base station)

Small body, big power

Integrating the RTK GPS (M8P) + GNSS system dual positioning module and a COMPASS geomagnetic compass in just 53MMX32MM volume greatly reduces the need for aircraft installation volume, increases reliability and greatly reduces hardware costs.

CNC aviation aluminum alloy shell

C-RTK uses a CNC formed aluminum alloy shell, in addition to reducing external electromagnetic interference, reliability and durability also have some improvement

Double-ended design

The use of TYPE-C interface design, clever use of port redundancy design, the aircraft end and ground end only need to insert different specific data line can be double-ended switching, convenient and rapid iteration, reduce operating costs

Centimeter level positioning

Run advanced differential algorithm, so that the positioning accuracy of centimeter level positioning accuracy.


here is the order link :

https://www.aliexpress.com/store/pro...705e2fadfhTzYJ

any questions, just feel free to contact us

Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City，Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/

hi ,dear friend

happy new year to all !

we come back to work from CNY holiday !

welocme to order now


Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City，Guangdong. China
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/

NEW FREE SHIPPING CUAV Pixhack V3 Flight Controller Combo for FPV RC Drone Quadcopter Helicopter flight simulator

Pixhack V3 is a new UAV control system, by cuav to build a new, can run Px4 and APM environment. Support includes: fixed wing, multi rotor (3-8 rotor), helicopter, VTOL VTOL UAV, unmanned vehicles, unmanned boat.

escription:

CUAV Pixhack V3 Flight Controller PIX Open Source for FPV Drone Quadcopter Helicopter

Ground station : Click here
Flight controller drive: Click here
Pixhack information: Click here
APM/PIX information: Click here

Notice: The booking period is about 10 days.

Specifications:
- Processor: 2
- Main processor: STM32F427 V3
- Coprocessor: STM32F1
- Support remote control signal: PPM/SBUS/DSM
- Power supply redundancy: Support 3 channels redundancy
- 6* 3 groups of IMU
- Support fixed wing/multirotor 3-8 axis/helicopter/car/boat
- Support PX4/APM software

Sensors:
- L3GD20 3-axis Accelerometer
- LS303D Accelerometer+Magnetic meter
- Ms5611 Barometer
- MPU600 gyroscope+ Accelerometer
- MPU9250 Accelerometer+gyroscope+Magnetic meter
- Ms5611 Barometer

Parameter:
- Weight: 70g
- Shell material: CNC aluminum alloy
- Size: 68*44*15
- Working temperature: -10~55 degree C
- PWM output IO: 13
- Mavlink seriel port: 2
- Support GPS:2
- Debug interface: 1
- I2C interface*2
- CAN interface*1
- Support smart battery
- HackLink : Support
- Built in shock proof

buy now as below:
https://www.aliexpress.com/store/pro...55b868ec6n7EXu

2.1 basic introduction of product function:

HACK LINK is an UAV high-definition digital link which designed & produced by CUAV. It is the only one to support the mavlink data and HD video digital link on the market .

HACK LINK support 720p HDMI real-time video transmission , as well as real-time interactive mavlink flight data, and even support PPM remote data forwarding. The real time watch and control of HD video can be realized by mobile phone or tablet.

Products divided into end plane and ground station, both by a single high performance of NXP IMX6 CPU which is responsible for processing . and runs the Linux system, ensure maximum system reliability, and also has a strong secondary development room and let UAV lovers to maximize their play imagination.

Wireless part adopts high performance high PCI-E WiFi network scheme, 2X2 mimo antenna design, single road up to 500MW power, each through CUAV strictly calibration and test by Agilent N4010 and IQFLEX , to ensure the maximum consistency, in the open without shelter environment, distance even more than 2km .

PS: Attached the hacklink content for your reference.

Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/

CUAV Pixhack V3C Flight Controller with M8N GPS + LED Board + PPM Encoder + TF Card for Drone free shipping

Pixhack V3 is a new UAV control system, by cuav to build a new, can run Px4 and APM environment. Support includes: fixed wing, multi rotor (3-8 rotor), helicopter, VTOL VTOL UAV, unmanned vehicles, unmanned boat.
Specifications:
- Processor: 2
- Main processor: STM32F427 V3
- Coprocessor: STM32F1
- Support remote control signal: PPM/SBUS/DSM
- Power supply redundancy: Support 3 channels redundancy
- 6* 3 groups of IMU
- Support fixed wing/multirotor 3-8 axis/helicopter/car/boat
- Support PX4/APM software

Sensors:
- L3GD20 3-axis Accelerometer
- LS303D Accelerometer+Magnetic meter
- Ms5611 Barometer
- MPU600 gyroscope+ Accelerometer
- MPU9250 Accelerometer+gyroscope+Magnetic meter
- Ms5611 Barometer

Parameter:
- Weight: 70g
- Shell material: CNC aluminum alloy
- Size: 68*44*15
- Working temperature: -10~55 degree C
- PWM output IO: 13
- Mavlink seriel port: 2
- Support GPS:2
- Debug interface: 1
- I2C interface*2
- CAN interface*1
- Support smart battery
- HackLink : Support
- Built in shock proof

and M8N GPS, Now have big disount , come and buy here

https://www.aliexpress.com/store/pro...70fa1a68M5uLJj

hello ,dear friends.

how are you ?

our new year holiday coming, here is holiday notice.

if you have order, just make asap before our holiday


Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/

hi ,dear friend

here is our company pictures.

welcome to our company
our webist:
https://leixun.aliexpress.com


Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/

hi ,friends , check our collections!

what do you think ? if you like can leave a comment

will fly later soon


Best Wishes !

lindy liang
Guangzhou CUAV Technology Co,.LTD
Address: N203B , 3 North Gate,Technology Park software building , City Ring Road South 2 ,Nansha District , Guangzhou City
Tel: 13570272379
Wechat:0086-13570272379
E-mail :lindy@cuav.net
Websit:
https://leixun.aliexpress.com
http://www.cuav.net/

HOT SHIPPING FREE CUAV Minim OSD suporte protocolo MAVLINK OSD ARDUPILOT MEGA OSD para APM / Pixhawk / Pixhack

our customers have high comments about it , wow

now we have big discount, you can order here.

https://www.aliexpress.com/item/HOT-...837993864.html

BR
lindy

wow, this is CUAV Hacklink HD map digital link ground pull test ,come and see

http://v.youku.com/v_show/id_XMTYyOT...~5!4~5!2~1~3~A

HOT SHIPPING FREE CUAV Minim OSD suporte protocolo MAVLINK OSD ARDUPILOT MEGA OSD para APM / Pixhawk / Pixhack

Description:
the OSD is the automatic identification of video formats of the camera. but if you do not pick up the camera, you can choose a point in the back does not have a camera output formats. the default is N, the welding where PAL PAL output
MinimosD, is based on the Arduino OSD. the one designed for ArduPilot MEGA and protocol MAVlink flight control system design
its main part is an Arduino ATmega328 MCU and monochrome screen MAX7456 stack chips. programming is via a FTDI compatible 6 pin connector.
it owns two independent power supply and ground part of the OSD function isolation phase of simulation: a 5 V ATMEGA part and OSD digital phase function, based on cable or other FTDI 5 V power supply; and a 5 V analog voltage phase part of the OSD function through the video / output connectors, able to handle up to + 12 V from the input power supply. welding line jump, power supply and the floor two pieces together if necessary.

NOW have big discount, buy here :
https://www.aliexpress.com/store/pro...6e0f3705HLxLKI


Any question, just feel free to contact us

BR
LINDY
lindy@cuav.net
https://leixun.aliexpress.com

hi, dear friend.

today let't us tell you about pixhawk, i trust most of you know the pixhawk, right ?
here is the details you can see:

Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller with Safety Switch and Buzzer 4G SD and I2C Splitter Expand Module

https://www.aliexpress.com/item/Pixh...745479dfp9Gl4b

Any question, just feel free to contact us

BR
LINDY

2.1 basic introduction of product function:

HACK LINK is an UAV high-definition digital link which designed & produced by CUAV. It is the only one to support the mavlink data and HD video digital link on the market .

HACK LINK support 720p HDMI real-time video transmission , as well as real-time interactive mavlink flight data, and even support PPM remote data forwarding. The real time watch and control of HD video can be realized by mobile phone or tablet.

Products divided into end plane and ground station, both by a single high performance of NXP IMX6 CPU which is responsible for processing . and runs the Linux system, ensure maximum system reliability, and also has a strong secondary development room and let UAV lovers to maximize their play imagination.

Wireless part adopts high performance high PCI-E WiFi network scheme, 2X2 mimo antenna design, single road up to 500MW power, each through CUAV strictly calibration and test by Agilent N4010 and IQFLEX , to ensure the maximum consistency, in the open without shelter environment, distance even more than 2km .

more details can check here:
https://www.aliexpress.com/store/pro...7eab7e815Ac76o

PS: Attached the hacklink content for your reference.

Thanks and warm regards
BR
...Continue Reading

RC Anti-vibration Plate Vibration Damping Mount Shock Absorber Pixhawk Pixracer APM2.5/2.6/2.8 Flight Controller Quadcopter

https://www.aliexpress.com/store/pro...440085acoF37YY

flight control damping plate Controller Board Anti-vibration Set Shock Absorber for APM 2.5 2.6/KK/MWC F16285
Specifications:
Color: Black
Material: Glass fiber
Size: 10 * 8 * 1cm / 3.9 * 3.1 * 0.4in
Suit for different open source flight controller, like APM 2.5/2.6, KK, MWC, etc

Note:
Quadcopter frame not include.

Package list:
1 x Flight Controller Anti-vibration Set Shock Absorber

Happy birthday to you my dear friend.

he is my best friend, and also my buyer, he buy each week in our shop as below

https://leixun.aliexpress.com

and he said our products is the best, CUAV is the best in quality, service, and after-sale service!

thanks so much for you to have such a high comment