Shop our Airplanes Products Drone Products Sales
dys123's blog View Details
Posted by dys123 | Dec 21, 2018 @ 05:36 AM | 1,526 Views
DYS crazy cool sunfun motor is coming , Giveaway! Giveaway!! Giveaway!!! easy to get it by following the step,but only 10sets! First come , First served~
Posted by dys123 | Jun 19, 2018 @ 04:21 AM | 4,368 Views
Hello,Guys. Great news to share with you.DYS released the NEW Blheli_32Bit 4 in 1 ESC,The Aria F45A.

The DYS Blheli_32Bit 4 IN 1 ESC F45A 3-5S Dshot 1200 ESC W/LED is a 32bit ESC Features the latest generation Blheli_32 firmware, and it support the newest DShot 1200 protocol.The 32bit archetecture enables the ESC to run at incredible speeds resulting in better performance, faster input signals and lower latecny compared to older 8bit ESCs.

The ESCs are light weight and compact in size, saving weight and making builds easy and neat.The ESC features new BLHeli_32 firmware pre-installed on them.

Below is spec for the Aria F45A ( 4 in 1 ESC)
Input voltage:3-5S Lipo
BEC: 5V/3A & 9V/1.5A
Weight:19.8g(without battery wire)
Cont Current(A):45A
Burts Current(A)>10S:50A

◆ With 32bit ARM Cortex MCU STM32F051 48MHZ micro processor, throttle 2048 resolution ratio,strong anti-interference capacity.
◆ Built-in two BEC 9V / 1.5A and 5V/ 3A.
◆ The telemetry port and on-board current meter of the ESC can use the flat cable and it will test the current,voltage and power etc.
◆Built-in temperature sensor will pass the telemetry port to transfer and overlay to the OSD of FC,It can be programmed setting for temperature protection.
◆ With USB linker can be programmable throttle setting like support positive and negative,two-way mode,FPV 3D mode,motor speed,braking ,PWM frequency, inlet...Continue Reading
Posted by dys123 | Feb 05, 2018 @ 01:48 AM | 5,553 Views
Hi,We are happy to bring you the New product,The DYS Micro FPV brushless Drone Shark-Mako.
It has Grey and Orange color for your options. For the feedback we have got from the pilots,we have also upgraded the material to PC,which it makes the drone more durable. Also,with split type frame,it will be easy and quick assembly.
With BE1104,F4 FC and F18A,it will give you great power flight experiences.
It can also fly at night with its tail shiny LED, and it can be setting of the flight status by FC,such like lower voltage warning.
The receiver is Frsky D8 protocol,so it is compatible with the Frsky remote controller which support the D8 protocol.
The special design 2 inch prop can be efficiency lower the windage.

What is more, the RTF version will come with the DYS new remote controller.It is called Mr.Q.
The gimbal stick is the hall stick. So it will give you promising handle feeling.
It has the display screen holder for 5 inch size. The power charging is 5V and also by power bank.

Brief introduction
* Shark Mako drone is designed for hobbyist who love FPV race, aerobatic flight etc.
* Brand-new design concept, high performance F4 flight control system, high precision IMU and new generation CUP design. Not only perfect integrated distribution board with flight control, but also with OSD, current sensor, voltmeter etc.
* Built-in 2.4G receiver, 5.8G 25-200mw 40CH VTX and 3DBI antennas, 150wide angle give you fresh FPV experience.
* PC material frame...Continue Reading
Posted by dys123 | Nov 29, 2017 @ 06:24 AM | 21,887 Views
More and more people join in the FPV hobby with different requirements. Simple frame design, thinner frame arm, less cable and solder. So DYS F4 flight control came out to meet the customers demands. We collect different users and pilots suggestions base on F4 PRO to improve and optimize.

Make the F4 PRO V2 look more reliable and simple to use. Add the protection circuit on the board to ensure safety in use and perfect match with 4-in-1 esc.

1. Add S5,S6 motor control signal (support 6 axis feature after updating firmware)
2. Integrated reverse high voltage protection circuit to the PDB board
3. 9V/1.5A power output for the external device, such as wide voltage transmission module
4. 5V/3A one-way output circuit, avoid external power supply interference
5. Integrated protection circuit to USB port
6. Independent 3.3V/0.3A regulated output circuit for external device
7. Connect with DYS 4-in-1 esc F30A/ F20A with flexible flag cable instead of pin head

Hope these new upgrades make you more easy and reliable to setup and fly.

If any comments of our products, that will be much appreciated. We would like to be better and better with you all.

...Continue Reading
Posted by dys123 | Nov 14, 2017 @ 01:02 AM | 5,165 Views
DYS release the brand-new Sumguk series motor, which is on the background of Chinese history. Sumguk is one of the important period of Chinese history.

The Three Kingdom which named Sumguk which is composed of Wei, Shu, Wu. These three all with their own culture and characteristic. The motor design is created as the Sumguk weapons, and the Three Kingdom 魏Wei, 蜀 Shu, 吴Wu represent the different motor size. The motor color also reference to their flag color.

One of these three type brand-new design will suit for your requirements. You will get fresh visual enjoyment and some interesting from the package.

This Sumguk motor will keep you freestyle but also learn more Chinese history. These motors will start shipment on Nov 30th. One thing you may concern the price of these motor as well, the price is very favorable, US$9.99/pc for every motor.

Below KV for your selection,
Wei: 2300KV, 2600KV;
Shu: 2500KV, 2800KV;
Wu: 2400KV, 2700KV

Are you still clam? Keep you pocket money now to get the ones for your drone.

Stay tuned for more information.

Posted by dys123 | Oct 09, 2017 @ 02:09 AM | 9,642 Views
Two weeks for moving the factory to the new address, the new products come out a little late. The little brother combo come finally launch.

Received some feedback from F4 PRO with F30A for the loose contact with the pin header. So we change the pin header to flexible flat cable to connect mini F4 and F18A. Of course, for the future batch F4 PRO, we will also change to use the flexible flat cable to avoid the loose contact issue.

These mini combo set with light weight for 3 inch frame with 20x20 mounting hole. 6g net weight exclude the cable each board. 2-4s lipo for your freestyle or race drone. 5V 2A BEC for your device.

It should be nice to use with DYS new motor blue cap BE1404. 3-4s would be powerful to use.

It will start to ship out around Oct 30th.

More information will be updated soon on DYS website: .

...Continue Reading
Posted by dys123 | Sep 12, 2017 @ 05:42 AM | 5,075 Views
Just finished the InterDrone 2017 and back to office yesterday. It changed to the new place this year and the hurricane hit America this time, so not many people attend it as last year.

But we still meet some new and old friends there. The new friends show their interest of our DYS products. The old friends express their ideas and comments by using DYS products. Really glad to meet all these friends.

The second time for us to InterDrone, what impress us is the kind people and nice place in Las Vegas. Even we just sleep just 3-5 hours per day, but we have more passion when we met the people in the booth.

This time, we do not take the new frame to the booth, but the ELF 83mm micro brushless drone also attract peoples attention. Also the tiny brushless motor BE0703 also catch their eyes on. It is not exaggeration to say that the size is similar as the earrings.

The popular perfect match combo F4 PRO and 4-in-1 esc F30A also met their fans there. Some newbie who do not have experience with FPV drone are very interesting to collect some parts for assemble. DYS glad to be the first class of your FPV life.

Once a year, take photos is one of the reason what we came, DYS would like to record the moment of our new and old friends. Really appreciate to share all your comments or suggestions with us.

DYS will become more power and strong to meet you again. Look forward to see you in CES of January of 2018.

...Continue Reading
Posted by dys123 | Sep 02, 2017 @ 03:58 AM | 5,006 Views
Once a year, Interdrone 2017 will start from next week (Sep 6th - 8th ). We will take some gift to give back to DYS supporters. 50pcs motor MR1407-4300KV for free.

Would you like to get one set (4pcs) MR1407 for your drone? Pls join us DYS Communication Team on facebook first, and show us the screenshot of this post with your comment at our booth. Or take your drone with DYS products to our booth. You will get 4pcs free MR1407-4300KV.

Quantity limited, first come, first served.

Of coursed, you can get our products with favorable price on the scene. Quantity limited. Dont miss it!

We are looking forward to meet you at Interdrone Las Vegas.

Interdrone 2017 at Ria Las Vegas
Booth NO: 608
September 6-8, 2017

Posted by dys123 | Jul 31, 2017 @ 01:49 AM | 15,903 Views
The DYS BLHeli_32 35A 3-6S DSHOT 1200 ESC w/ LED is a 32bit ESC features the latest generation BLHeli_32 firmware, and it support the newest DSHOT 1200 protocol. The 32bit archetecture enables the ESC to run at incredible speeds resulting in better performance, faster input signals and lower latency compared to older 8bit ESCs.

The ESCs are light weight and compact in size, saving weight and making builds easy and neat.The ESC features new BLHeli_32 firmware pre-installed on them.

The advantage of Dshot1200,Quote from OscarLiang: (

Comparing to Analog ESC protocols like Oneshot and Multishot, the same benefits of DShot applies to DShot1200:

Higher resolution and more accurate and reliable data
Data error rejection
Now with the advantage of even higher speed with DShot1200, there are more reasons to change over to digital ESC protocol now from analog
Comparing to other DShot protocol, DShot1200 is simply faster. And faster is always better if the system is capable of running it

Here come Some basic info of DYS Aria Blheli_32Bit 35A ESC:
Item name:Aria Blheli_32Bit 35A
Weight:4.37g(without motor wire)
Continue current:35A
Burst current:40A
Input voltage:Supoort 3~6S lipo

New 32bit Cortex-M0 running at 48MHz
The latest BLHeli_32 Firmware
Light weight and compact size
Onboard RGB LED for customizable color
Adaptive timing,and compatible with a wide range of motor in the market
Current limit & current sensor
Support Dshot1200/600/300/150,Oneshot125,Oneshot42,Multishot
Mosfet is covered with aluminum sheet for cooling,which can bring more efficiency and stability

Product Webpage is below:

Where to buy:

Posted by dys123 | Jan 13, 2016 @ 06:14 AM | 10,075 Views

DYS Hi-Performance Prop 3030, 3545, 4045, 4040, 5030, 5045, 6040, 6045 with nice head card. Besides, the new FPV 3-blade CW CCW prop 4040, 5040 and 5045 is available now. Black, Red, Orange and Green color for your choice.
If you have the requirement for other colors, we can also make it for you.

...Continue Reading
Posted by dys123 | Nov 23, 2015 @ 01:07 AM | 10,259 Views
Hey, Friends,

We release the upgraded ESC based on SN20A, and the size is similar than SN20A, but a little lighter than SN20A. only 5.4g now, It is BLHeli bootlader and BLHeli firmware as well.

The main control chip is using Silicon Labs 8051 series, running speed is about 50MHz (16MHz for SN20A), the drive circuit is upgrading to MOS drive, improved the overall equipment efficiency.

There are two versions for selection as well.

One is named XM20A, similar construction as SN20A.
size: 24*14*4.5mm
Weight: 5.4g
Support: 3~4S

Another is named XML20A, it is strip-type, it can easy to through the carbon fiber tube for this construction.

Pls let me know if you have any questions about DYS ESC, thanks!
Posted by dys123 | Oct 21, 2015 @ 04:34 AM | 9,548 Views
Good afternoon, Friends,

DYS released the x230 racer at finally, this is first time to release completed product,what is ready to fly version. So, we spend about 10 months from design to bulk product, from test to test....anyway, now, this item is coming soon now!!

-With remote control and associated equipment.
-Built-in 120wide angle and 1920 x 1080P HD camera
-With TS832 wireless 5.8G transmitter
-With 2200mAh smart flight battery
-Flip 360 steadily
-The remote control range can be 1000 meters for wireless video transmitter and multicopter.
Posted by dys123 | Oct 14, 2015 @ 02:43 AM | 10,772 Views
Hey, Guys,

DYS released a combo gimbal with Zero camera. And it is with perfect package, and save the shipping cost and ship together.

The Zero camera spec as below:
Image Sensor:
Type: 1/2.33 CMOS 16.37 MP (Panasonic MN34120PA)
Effective Pixels:Approx. 16.37 Mega Pixels (4660 * 3512)
Output Pixels:Approx. 16 Mega Pixels

Focal Length:Lens f= 3mm
F No.:F= 2.8
F.O.V(D):166(H=120 V=89)

LCD Display:2.0 720*240 dots matrix TFT LCD

If you have any interesting, welcome to contact our sales directly....Continue Reading
Posted by dys123 | Aug 06, 2015 @ 05:22 AM | 10,096 Views

New product to share with you all!

It is tiny power combo set for 160mm racing quad, perfect for DIY mini quad.

DYS BE1104 4000kv*4pcs
DYS mini 10A BLheli esc, special manufactured for BE1104 4000KV *4pcs
ABS3020 prop *3 pairs

BE1104 4000kv spec:
KV................................................ .................................................. ............4000
Stator Diameter.......................................... ..........................................14mm
Stator Length............................................ ..............................................12.5 mm
Shaft Diameter.......................................... .............................................1.5mm
Motor Dimensions(Dia.*Len).............................. .................Φ1412.5mm
Weight (g)............................................... .................................................. ..5.6g
No.of Cells(Lipo)....................................... ..............................................2-3S
Max Continuous current(A)........................................ ....................3.5A
Max Continuous Power(W).......................................... .................38.9W
Posted by dys123 | Aug 06, 2015 @ 03:14 AM | 9,512 Views
Hello, All,

We got a email inform that bought the motor from below ebay shop, the motor is under "DYS" brand, but When he installed it in his gimbal, he noticed very big play in bearing, that makes it almost
impossible to use:

After checking the ebay link, we found they didn't put DYS logo on the description, also, the motor isn't with DYS logo, but they are using DYS motor drawing on the site.

Checked all details, the motor is fake, pls find the image for comparing.

The ebay shop link is as below:
Posted by dys123 | Jun 24, 2015 @ 08:59 PM | 9,352 Views
My mini quad, the DYS BE1806 motor is strongly recommend, Unlike EMAX motors, these motors dont come in fancy packaging. But they have plenty of clearance for mounting screws up to the windings, generously long motor leads with pre-soldered 2mm male bullets, uses the staggered 12mm and 16mm mounting patterns, offers two prop mounting solutions (traditional bolt on adapter and a T-motor style two screw option), and a color closer to orange than gold.
alrite ! i think i ned to put DYS 250 spec here.. check out !
For more information about this motor, check out the 250 mini quad parts list.
Spec from seller:
Brand: DYS
Item No: BE1806
Item name: 1806 2300KV Brushless Motor
Height: 0.85 inches (21.5mm)
Width: 0.90 inches (23mm)
Weight: 18 grams
RPM/V: 2300KV
Output shaft diameter: 2
Voltage: 2-3S
Battery: 2-3S lithium polymer
Max.current: 7.6A
Max.power: 84.4W
Mounting pattern: 2x 12mm and 2x 16mm
Motor mount hole size: M2
Also , they got different colors for the new version of BE1806
For me, these are really nice motors, if you are looking for 1806 motors, I dont see any need to to buy any of the more expensive alternatives unless you dont like the colour! It comes with quite long motor leads (for a 250 quad), you can easily shorten the supplied leads.
These are a great little motor and the motor leads are good quality silicon. On a 250 quad theyll reach comfortably to the cage keeping escs inboard.
Posted by dys123 | Jun 11, 2015 @ 05:59 AM | 12,602 Views
It is time to share the new item with you all.

The esc programmer is compatible with SimonK and BLHeli firmware, can work with SN series esc directly.

Weight: 8.0g
With the black plastic cover.

The retail price is only US$7.50/pc.

Welcome access DYS official site to know more products.
Posted by dys123 | May 25, 2015 @ 06:05 AM | 10,241 Views
Item: Summer

Controller: mini 32bit Alexmos Controller

Weight: 1790g ( not including the camera)

Total Weight: 4.74kg ( Including the package)

It is Play & Plug option, with low weight for this gimbal.

IMPORTANT: Camera size requirements: the maximum horizontal length between gravity and
Roll axis is 75mm; Width of camera is 147mm, height is 157mm as above picture shows.
While mounting camera, please keep the camera power off.
Posted by dys123 | May 25, 2015 @ 05:50 AM | 10,260 Views
Hey, Friends,

DYS released the mini 250 frame with BE1806 2300KV, and mini 20A esc with BLHeli firmware, CC3D and 5030 props, here is the images for your review and welcome to contact DYS to make the order, Due to DYS is manufacturer and provide all the goods to the distributor, so, you can contact with the dealers directly for the final product selling:
Posted by dys123 | Sep 04, 2014 @ 01:44 AM | 11,130 Views
Hey, Friends,

DYS will have new big gimbal with new contrustion to be releasing soon, share the drawing with you all first, appreciated your comments.

We will have stock for this new gimbal at the end of this month. And it can be pre-order from last week.