steevie's blog View Details
Posted by steevie | Sep 13, 2020 @ 06:29 AM | 1,512 Views
Hello everyone,

After successfully building and then flying my Nemo 4S convertible model, I decided to start studying and building a new model: The XTI Trifan 600.
XTI Aircraft Company, based in Denver Colorado, is developing this revolutionary design aircraft.
Based on the images and videos that I could find on the internet, I tried to draw inspiration from the lines of the Trifan 600. I do not claim to obtain the exact shapes. I miss my knowledge in my software as well as the technical documentation. I'm just trying to get as close as I can to it.
After the long hours spent on the CAD software, the first screenshots are here.
There is still a lot of work to do but it is already very motivating. I will now have to start the test bench which will allow me to validate the technological components.
Posted by steevie | Sep 13, 2020 @ 04:01 AM | 1,246 Views
Here are some photos taken the weekend of September 5 and 6 in Vicques as part of the Vic'Funfly meeting.
I took part in it with my Nemo 4S model and the Freewing L-39 ALbatros. I thank my friend PAG for the photos.
Posted by steevie | May 25, 2020 @ 07:00 AM | 4,840 Views
Satisfied with the flights of my first VTOL Nemo model, I chose to build a larger model. Here is the 6th flight of my new model with tilting rotor.

Caracteristics :
Wingspan : 1500mm (with motors)
Airfoil : N10 modified 15% relative thickness
Weight : 1300gr
Accu : Lipo 14.8V 4S 2200mAh
ESC : 2x 35A Talon Castle Creation
Motors : 2x Aerodrive Turnigy D2830-11 1000KV
Propeller : slowfly 2x 8x4" (3 blades) (CW and CCW)
Card : KK2.1 with OpenAero VTOL 1.6 firmware

NEMO 4s RC Tiltrotor aircraft (2 min 43 sec)

Posted by steevie | Jun 24, 2018 @ 02:40 PM | 4,587 Views
Thread PAUL's Nemo :

Caracteristics :

Wingspan : 800mm (without motors)
Airfoil : N10 modified 15% relative thickness
Weight : 440gr
Accu : Lipo 7.4V 2S 1000mAh
Servos :
2x ailerons Hitec HS-55
2x Tilts Hitec HS-56 HB
1x elevator Hitec HS-55
ESC : 2x 12A Afrojack opto
Motors : 2x Epower 2204 2300KV
Propeller : slowfly 2x 7x6" (CW et CCW)
Card : KK2.1 with OpenAero VTOL 1.5 firmware
Receiver : frsky

Video of my Nemo version
NEMO VTOL (3 min 15 sec)

Posted by steevie | Dec 28, 2013 @ 08:00 PM | 6,276 Views
This is some pictures of my Edge 540 epp model project.

Caracteristic :

Wing span : 880mm
Length : 870mm
Weight : 160gr
Posted by steevie | May 21, 2011 @ 03:29 AM | 8,651 Views
A short article of Swiss Championships F3P 2011 is online at AMJD website.
Here's the direct link to access the article:

The article is in French.

Best Regards,
Posted by steevie | Aug 15, 2008 @ 10:25 AM | 13,060 Views
After reading the messages of post :
I believe that the models of vtolman are fantastic. The model is very simple and if it is not yet capable of flight with the propellers horizontal position, the result is already remarkable. The videos in flight are amazing.

I decided to get into the construction of my first VTOL using the principles of vtolman. I want to try to reduce the maximum weight. I will use the indoor equipment.

Caracteristic :

Wingspan : 750mm
Weight : ~ 400gr
Motor : 2xApache
ESC : 2x Phoenix 10
Propellers : 9"x4,5"
Servos : Orientation motor 2x HS56 / Elevator 1xHS50
Posted by steevie | Aug 03, 2008 @ 08:33 AM | 13,526 Views
The Mini Vector is finished and painted. The Light is instaled.

Posted by steevie | Jul 28, 2008 @ 04:26 PM | 14,487 Views

This is some pictures and video to first flight of Mini Vector.
Best regards,


Mini Vector with pyrotechnic engine (0 min 41 sec)

Posted by steevie | Jul 20, 2008 @ 06:52 AM | 15,198 Views

This is some pictures of my new model project. A mini Vector with a pyrotechnic engine.

Caracteristic :

wingspan : 600mm
long : 490mm
weight without pyrotechnic : 60gr
Radio : 2 servos BlueArrow 4,3gr, Lipo 1S 300mAh
All part Depron 3mm

Posted by steevie | Apr 13, 2008 @ 01:38 AM | 14,365 Views
3D Flight by David Zigerli with Edge540 Shocky.

Flight Edge540 Shocky GFT (3 min 57 sec)

Posted by steevie | Mar 29, 2008 @ 03:56 PM | 14,732 Views

Maiden flight of my prototype Shocky glider "fox" here :


Posted by steevie | Mar 23, 2008 @ 03:40 PM | 17,298 Views
My new Shocky Glider "Fox" :
Wing span : 1000mm
weight RTF : 60gr
Radio : 3 servos BlueArrow 2,5gr, Lipo 1S 300mAh
All part Depron 3mm

First flight coming soon

Posted by steevie | Jan 11, 2008 @ 07:22 AM | 25,356 Views

I received my first EDF jet model. This BAE Hawk produced by Flyfly Hobby (
Here is a small presentation with pictures of the box.

...Continue Reading
Posted by steevie | Jan 05, 2008 @ 04:06 AM | 15,431 Views
First test of my Propeller with Leds.

1x Battery Button Lithium 3V 30mAh
2x Leds miniatur 1,9mm


Posted by steevie | Dec 25, 2007 @ 10:36 AM | 15,896 Views
Some Pictures of my Lighting Edge 540 indoor

Posted by steevie | Aug 29, 2007 @ 06:05 AM | 16,813 Views
Hello everyone,

Some Pictures of my last model in construction.

Wing span: 1m
Engine : Hacker 20 20L
Propeller: 10/4,3
Battery: 1500 mAh 11.1V LiPo

Posted by steevie | Aug 12, 2007 @ 03:45 AM | 20,234 Views
My X-15 model with pyrotechnic motor :
Wing span : 350mm
Length span : 730mm
weight RTF : 130gr
Radio : 2 servos BlueArrow 4,3gr, Lipo 1S 300mAh

The structure of the fuselage is made with Depron 6mm. The formwork is in 3mm. The cabin with before is sandpapered in roofmate