burkefj's blog View Details
Posted by burkefj | Mar 14, 2021 @ 08:25 PM | 10,035 Views
Here are two flights from this weekend at the tri cities, washington, 1180 feet altitude, great weather.

Upscale Orbital Transport R/C glider on H-13 motor (5 min 15 sec)

Posted by burkefj | Feb 03, 2021 @ 01:21 PM | 11,991 Views
Here is some flight video with a 3-d printed nose cone version today.

Altus Micro Peak Altimeter read out 733.5 feet!

Dynasoar Rocketry Buran Russian Shuttle R/C rocket glider (3 min 54 sec)

Posted by burkefj | Jan 18, 2021 @ 02:41 PM | 12,436 Views
Posted by burkefj | Jan 07, 2021 @ 02:16 PM | 10,293 Views
She earned her wings today!
Dynasoar Rocketry Space Shuttle R/C rocket glider flights (5 min 8 sec)

Posted by burkefj | Dec 31, 2020 @ 08:48 PM | 14,511 Views
I designed/built this yesterday, a simplified Buran shape, with a slightly enlarged wing, approx 1/72 scale, 18" wingspan, 21" length, 8.2. oz ready to fly using an E-6 longburn Aerotech composite rocket motor.

Russian Buran Shuttle R/C rocket glider flights (5 min 40 sec)

Posted by burkefj | Dec 25, 2020 @ 09:13 AM | 13,893 Views
Believe it or not we opened stockings today and I got some servos and a receiver so I put them quickly to good use. I made a small R/C rocket glider with a 12-in disc wing, bt60 tubing and a mini bertha nose cone. 25" long, 5.25 oz rtf with d2.3 motor. Flew great, nice long glide, didn't need to touch the trims got in two flights right at sunset and then headed home to hand cut some red, black and chrome vinyl trim to finish it off. I really like disk wings.

R/C disk wing mini rocket glider (3 min 17 sec)

Posted by burkefj | Dec 17, 2020 @ 07:53 PM | 15,394 Views
It flew! It doesn't glide very long, but it works, it's cute, it's a viper and no one else has one
Mini R/C BSG Colonial Viper Rocket glider (3 min 8 sec)

Posted by burkefj | Dec 13, 2020 @ 05:30 PM | 15,648 Views
I worked on this yesterday, X-37B inspired, came out nicely, using BT-80 tubing, pnc-80BB cone and 6mm and 3mm depron for surfaces and side plates. I moved the wing back and upsized it for glide and to allow it to function like a delta and have fixed V tail which works better in general than modeling the actual X-37B layout. It goes high and fast, around 800 feet, just below the cloud deck today, fast but nice glide. it's small, 24" long, 2.6" diameter, 18.5" wingspan, about 1 sq foot of wing area, 7.6 oz ready to fly using a 24mm composite Aerotech E-6. It was very roll sensitve, I had to tone down the roll rate to 30%. Looks great in the air and on approach.

X-37 R/C rocket glider flights (6 min 28 sec)

Posted by burkefj | Nov 19, 2020 @ 07:51 PM | 15,314 Views
It's so cute
1/21 scale X-15 R/C rocket glider flights (3 min 35 sec)

Posted by burkefj | Nov 15, 2020 @ 07:55 PM | 15,313 Views
here is another from today on the 17 second burn H-13 motor lofting the 5.66x upscale Orbital Transport glider

Large Orbital Transport R/C glider flying on H-13 longburn motor (2 min 44 sec)

Posted by burkefj | Oct 07, 2020 @ 08:29 PM | 11,148 Views
I listened to an AMA podcast with Hoot Gibson and he was working, among other things, an F-4D, I figured if it was good enough for him it was good enough for me. For some reason even though I'm fascinated by the jets of the 50's and 60's I've never built one. This is made with a 2.6" tube and cone, the new 6mm and 3mm depron being imported, 34" wingspan, 32" length, 10.5 oz ready to fly using a 24mm E-6 long burn composite motor.

F-4D Skyray R/C rocket glider flights (7 min 30 sec)

Posted by burkefj | Sep 27, 2020 @ 08:27 PM | 13,386 Views
This was a flight on the new Aerotech 29mm single use 8" long 17 second burn H-13 motor with a spike off the pad and 3# thrust for the remaining burn time, loaded on the pad this 6' tall glider weighed 32 oz, it was a bit sluggish on boost when going vertical so I let it angle a bit and in order to keep it overhead flew in a corkscrew over the top of myself till burnout at approx 1200 feet.
6' R/C rocket glider flying on 17 second burn H-13 longburn motor (4 min 5 sec)

Posted by burkefj | Sep 21, 2020 @ 04:48 PM | 13,422 Views
I was going through cleaning out my old plans I did back in 2007-2010 which were mostly profiles and I decided to see if I could adapt my F-107 profile to be more of a full fuse design, but use a rocket tube and nose cone to make it simpler. I had to make some concessions to scale appearance but I think it captures the look ok. Length is 36", winspan is 34", weight is 11.25 oz ready to fly using a 24mm Aerotech composite e-6 longburn motor. In this video I still had to finish the vinyl markings on the other half of the plane, but the weather was perfect for a maiden so out it went. These are the first three flights in order, flew beautifully.

F-107 UltraSabre R/C rocket glider flights (4 min 42 sec)

Posted by burkefj | Aug 18, 2020 @ 10:35 PM | 12,911 Views
I fell asleep at my workbench this afternoon and when I woke up I had apparently constructed an F-35 like r/c rocket glider.....28" long and 20" wingspan... Of course the nose isn't right because the f35 does not have a simple cone but it was the best I could do while asleep😁 the airframe as it sits right now empty weighs 5 oz, 9.5 oz rtf w motor and radio. Test flights at 6 a.m. the next morning were flawless, trims were spot on!

Here's my F-35 flight from this evening in a pretty good cross wind.
Dynasoar Rocketry F-35 Lightning II R/C rocket glider (1 min 35 sec)

Posted by burkefj | Aug 17, 2020 @ 09:24 AM | 16,485 Views
One of my customers asked if I could modify my Starship R/C rocket glider kit to have two warp engines instead of one, I originally did not do this to save tail/nose weight, but I modified my own model as proof of concept, added 1 oz to the flight weight but at 12.25 oz rtf it still flies nicely, just a bit shorter than the original version, you decide if you like the look better. 19" disk, 48" length. I'm somewhat limited to the angle of the warp engines so they don't interfere with the elevons, and I need the long nose section to counter balance the rocket motor in the tail of the rocket, I don't have the advantage of an electric prop/battery that I can put mid disk, and cg needs to be about 25% of the disk root chord. It was the best I could come up with that was star trek shape/inspired but would still fly as a tail mounted rocket glider. I used depron for the warp engines since it is much lighter than actually using even lightweight paper tubes.

Dynasoar Rocketry Starship R/C rocket glider flight (1 min 5 sec)

Posted by burkefj | Aug 15, 2020 @ 03:07 PM | 14,326 Views
I designed this on Thurs evening, based on some 2.6" tubing I had and a rounded nose cone that was pretty close to profile for a vulcan, wing is 32" span, 9mm depron, tail is 6mm depron as is the cockpit and motor details. I trimmed the rear of the tube to represent the stinger on the Vulcan, of course you can't really get the shape right without doing a builtup fuse and wing with the massive thick root, but I think it looks the part close enough. Length is 28", weight ready to fly wtih 24mm composite rocket motor is 10.2 oz, wing loading on glide is 5 oz/sq foot, so it's a floater.

R/C Avro Vulcan Bomber Rocket glider flight (1 min 35 sec)