Posted by MsWinchdoc | Oct 25, 2020 @ 02:01 PM | 4,996 Views
Episode 5 – “Trump on Steroids”
Upon election day results pile in and seeing the re-election as a now lost proposition – Trump resigns before the inauguration making Pence #46, who then pardons him of all wrong doing (review Nixon’s I am not a crook routine).
After Pence bails out Trump, he runs out the shot clock – having no real power anyway. Now that I’ve been proven innocent of all wrong doing” Trump becomes a talk show host/pundit reviled by all but the reddest of necks, the whitest of sheets and the blackest of hearts.

History note – for those that aren't aware, Adolph Hitler was heavily medicated by his personal physicians. They pumped him full of cocaine, methamphetamines, as well as vitamins and “other” substances. Substances which no doubt added to his inhumane, maniacal and psychotic behaviors as well as ultimate suicide.

DJT has contracted Covid-19, his personal physicians are assisting his ‘recovery’ with Dexamethasone, literally Trump on steroids. Substituting DMA coincides with another TikTok hack and many viral videos ensue. His dancing does not improve unfortunately.
Posted by Blaze0021 | Oct 25, 2020 @ 12:50 PM | 9,957 Views
This is the flight of my 1230mm wingspan TechOne Neptune 64mm EDF Jet Wing, modified for 4S flight.

TechOne Neptune 64mm EDF Jet Wing 4S Performance Flight (4 min 39 sec)

1) Receiver - Lemon RX DSMX 7-Ch Diversity Stabilizer / Receiver
2) ESC - Hitec Energy Sport 40a ESC
3) Battery - Tattu 4S 1800mAh 75C Lipo
4) EDF Unit - FMS 2840-3150KV Motor / 11-Blade Ducted Fan Unit
5a) Internal Cooling - Custom 3D-Printed Ram Air Intake Scoop (Lipo / ESC Cooling)
5b) Internal Cooling - Additional Rear Hatch Exhaust Outlets Cut (1:3 Inlet-Outlet Ratio)
6) Servos - Hitec HS-5055MG 9-Gram Metal Gear Servos x 2
7) Structural Rigidity - .057" x .177" x 11" Carbon Fiber Flat Spars x 2 (channeled and inserted in between the fuselage and wing sections)

I've had this EDF wing for several years now, but it's never had any spotlight time until now. This is absolutely one of my favorite and unique wings that I've kept to myself from social media until my friend Robert decided to record my flight yesterday. The grass was also at the right height and smoothness to attempt a take-off from, as well as a touch and go. Very much to my surprise, both were easy to do, and is another fun/unique feature from this already cool EDF wing.

It's a shame that there aren't many (if at all) of these EDF wings in production anymore. Despite the poor TechOne equipment it came out of the box with (a stock motor lead that had a wire separate on inspection, malfunctioning ESC, and a busted plastic servo), The Neptune is really a brilliant EDF Wing design that comes alive when quality internals are installed. I'm hoping that there will be an EDF wing re-release of something like it from one of the current reputable manufacturers in the future.
Posted by PittSpecial | Oct 25, 2020 @ 12:32 PM | 66,965 Views
Reporting in..........................

This super early this morning (October 25th, 2020 ) at Central Florida must have been the best weather conditions ever in a long time! Completely Dead Calm and cool temps.

Flew my modified Park Zone Spitfire Mk IX for two (2)_ wonderful flights and the very first one was pretty much alone by my self and before anyone else came to fly at my alternate RC Flying Site. I was able to fly this Spitfire one click below Half Throttle and it was majestic scale flight. Now I understand Why-O-Why I like to lighten all my models as it provides Scale effects and I was able to command the model in super slow level flight.

Second flight was exciting at best because a buddy finally arrived and he and I decided to fly in Formation, however, it turned out into a racing match and guess who passed the other and won? My Spitfire!

Before heading to this alternate RC Flying Site I was able to touch UP the Spitfire model with some acrylic paint(s) and it looks terrific!

Power System: Park Zone 480 (EFLM480BL) (960Kv)
Propeller: Master Airscrew 9 X 7 X 3
ESC: STOCK E-Flite 30-AMP (V2) ESC
Spinner: Dubro 3-Blade Spinner - Black
Batteries : GEN ACES 3-Cell, 1800mAH, 30C Lithium Polymer Packs
Retracts: Recommended E-Flite Retracts
Posted by DutchRC | Oct 25, 2020 @ 12:20 PM | 6,557 Views
Halloa people

sooo.. Multibind? Do you know what it does? It's a feature of the TBS Crossfire TX/RX system...
I am going to do some in-depth how-to video's on it but for that to make sense I first wanted to Show what it is..

So there you go.. In this video I'll give you a very Short intro into it but mostly a demo of it

TBS Multibind - WHAT?? A Quick Demo + Why Bother? :) (8 min 11 sec)

Posted by djmoose | Oct 25, 2020 @ 11:47 AM | 9,548 Views
I just started a VLOG series on the Hughes H-1 V2.

Maxford USA Hughes H-1 V2 Build - Episode 1 (8 min 47 sec)
Maxford USA Hughes H-1 V2 Build - Episode 2 - Tail! (10 min 51 sec)
...Continue Reading
Posted by Randburg2055 | Oct 25, 2020 @ 09:54 AM | 3,370 Views
Hi I'm new to this site, I'm looking for anyone who has information on a hanger 9cubcrafters 60cc I have wingspan size and length . But need all other dimensions of this model aircraft. I'm in lockdown so I have to try Thanks.
Posted by Doom 3D | Oct 25, 2020 @ 09:08 AM | 7,321 Views
The changes they made

Starting with the new ecu......

- GSU connects via a servo cable, no longer the large dateline cable used on all the dinosaur systems.
- Smaller, lighter, much more processing power.
- Due to more processing power, lower idle RPM, faster accel/decel is capable due to higher RPM accuracy.
- Single cable from ECU to engine (seperate valve and pump cables).
- More adjustable parameters including preset accel/decel curves all custom to every engine built for maximum performance.

Now the engine........

- Starting with a brand new Billet CNC compressor adding more power and efficiency. Thrust=3.8kg! With a weight penalty of <5grams.
- Single cable braided into a special connector used for the new ECU.
- Redesigned combustion chamber, exhaust/thrust nozzle, center cone, stronger welds.
- Micro JST added to starter motor wires from factory to aid in removing and installing fod screen.
Posted by Doom 3D | Oct 25, 2020 @ 08:53 AM | 7,207 Views
T35 vs X45

Two impressive lil Acorns!
Posted by Old_Pilot | Oct 25, 2020 @ 08:15 AM | 5,303 Views
Already thinking about the next build....built this one back in 2014 with twin 64 mm fans....I'm thinking twin 70's this time
Posted by VicT | Oct 25, 2020 @ 05:58 AM | 7,198 Views
I got to maiden Jack W’s new Eflite Extra at Odessa Fl after a WPMPA club meeting. The 300 is popular with at least 3 other club members in our 100 member club. I know that some aluminum motor mounts have caused vibration and have failed leading to replacement. The music wire landing gear can get bent and I have retrofitted the 300 with a Dubro 40-60 nylon gear legs. This gear does not break or bend and can be screwed or bolted further forward to reduce nose over damage while moving on the surface. most likely Horizon will discontinue the 300 and fix the design adding a 637T for telemetry. Cost will increase but it will be worth it in my opinion.

Jack wanted to preserve the nice fragile stock prop from such nose over damage so replaced it with an APC plastic 13/6.5 prop. On run up on a 4S she caused severe vibration. The factory spinner was removed and this helped but the prop was removed and rebalanced. This still caused vibration. Luckily Manny came to Jacks aid with a brand new 13/4 APC still in the package. The bore was reamed out enough to easily clear the shaft adapter and the largest plastic ring was pressed into place. This took away all vibration (no balancing required using the ring) however when the nice looking plastic backplate and spinner was added the vibration returned. So the maiden was completed with out the spinner and backplate. Jack’s Wattmeter measured 45 A , 670 W on a 3600 4S Venom and 31 A 334 W on a Venom 3200 3 S. We got 8 min of...Continue Reading
Posted by AL Porter | Oct 24, 2020 @ 08:26 PM | 6,062 Views
Posted by jmxp69 | Oct 24, 2020 @ 06:51 PM | 4,835 Views
I've got the ZOHD Dart 250g flying pretty straight now. Rates and gain info in the video description:
ZOHD Dart 250g FPV Version • Kopilot Lite Dialed-In • HD and OSD Footage! (7 min 59 sec)

Posted by kopterheld | Oct 24, 2020 @ 06:27 PM | 11,572 Views
Here how to update - install the DFU Bootloader from iRangeX iRX4 lite and install the latest multi protocol module firmware on the irx4 v

Video with EN subtitle
TBS Tango 2 mit Multi Protokoll Modul und Mobula6 binden (7 min 36 sec)

After updating the irx4 you can see the RSSI on the display in the radio by using D8 protocol.
With the v FW you can directly update later the iRx4 with the TBS Tango 2 radio

Coupon: BGIRX4LOT -

Mobula6 - Coupon: BGhONEY10 -
Mobula6 HD -

My Kopterheld Coupons on Blog, Telegram or FB:
FB -

My Equipment:
DJI Digital FPV System -
Fatshark Dominator HDO2 -
ImmersionRC RapidFIRE -
Taranis X9D Plus SE 2019 -
Jumper 4IN1 Multimodule -
FrSky R-XSR -
CADDX Ratel -

Youtube –
FB -
Blog –
RCGroups –
Telegram -
Instagram -
Twitter -
Posted by kopterheld | Oct 24, 2020 @ 06:14 PM | 10,903 Views
Here my video how you install the module bay on the tango 2 Pro and use the Multi protocol Module iRX4

The Video have en subtitles.
TBS Tango 2 mit Multi Protokoll Modul und Mobula6 binden (7 min 36 sec)

My steps:
- Update the Tango II firmware
- Update the Crossfire firmware
- Upload new data to the SD card
- Install the module bay
- Create a model for the Mobula6 on the Tango
- Pair the whoop with Tango 2 and fly.

Coupon: BGIRX4LOT -

Mobula6 - Coupon: BGhONEY10 -
Mobula6 HD -

My Kopterheld Coupons on Blog, Telegram or FB:
FB -

My Equipment:
DJI Digital FPV System -
Fatshark Dominator HDO2 -
ImmersionRC RapidFIRE -
Taranis X9D Plus SE 2019 -
Jumper 4IN1 Multimodule -
FrSky R-XSR -
CADDX Ratel -

Youtube –
FB -
Blog –
RCGroups –
Telegram -
Instagram -
Twitter -
Posted by GroundControlRC | Oct 24, 2020 @ 07:24 AM | 5,882 Views

XK A160-J3 Skylark 3D/6G System 650mm Wingspan EPP RC Airplane RC Plane RTF - Specs, Info, Tips, & Maiden Flight ;-)

XK A160-J3 Skylark Cub RTF

Banggood GCRC

Here is a link to the Video:

A little Plane with a lot of details and cool features ;-)

Spare Parts (I believe the Parts for the XK A430 Edge will work with this Plane as per discussions on Banggood)

XK A430 2.4G 5CH RC Airplane Spare Part 7090 7x9 Propeller

Tip on Balancing Props when you can't use a standard Prop Balancer:

You Can Help Support Us By Using Our Affiliate Links To The Products Above. A small commission (At No Cost To You) helps us buy more items to review.

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #XKA160 #XKJ3 #XKSkylark #J3Skylark #banggood

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes

See Us On Youtube | Patreon | RCGroups
Posted by Tazkiller85 | Oct 24, 2020 @ 05:04 AM | 6,517 Views
iFlight CHIMERA4 LR - Review Test Démo - Long Range Freestyler ... (44 min 34 sec)

Yep Les Amis,
Une CHIMERE bien Réelle ! lol . Comme vous allez le constater, ce test du CHIMERA4 LR de chez iFlight a été laborieux ! Mais au final, c'est pas plus mal car on a pu tester une météo différente sur 2 jours et également la config avec le 2ème jeu d'hélices. Donc pas déçu par ce petit 4 pouces, un bon compromis entre le Long Range, le Cruising et le Freestyle. Avec une bonne lipo entre 850 et 1000mAh en 4S, on aura une bonne autonomie d'environ 8 à 12mn en vol tranquille, et avec un 650 ou 750mAh, environs 6 à 7mn de freestyle, sans problèmes. Un châssis résistant et un bon équipement électronique, je ne peux que valider ce Chiméra 4 ! Bon Film et merci à tous pour votre soutien .

NOTATAZ : 18.5/20 Je valide !!!

Les + : Costaud, Autonomie correcte, Tarif intéressant, Accessoires fournis, Bien réglé sortie de boite, Polyvalent LR et Freestyle, Bien équipé.
Les - : Un buzzer autonome et des bras détachables aurait été un plus, TPU caméra à modifier ...

- Chronologie de la vidéo :
Unboxing : 00:15
Présentation: 05:45
Vol à vue : 12:57
Vol à vue : 09:42
Vol en FPV 1 : 12:48
Panne GPS ! lol : : 21:03
Vol en FPV 2, Test RTH : 21:25
Transition jour 1 et 2 : 27:39
FPV Freestyle : 30:12
Débrief et conclusion : 36:08
Mon betaflight : 43:43

- iFlight Chimera4 LR HD 3800KV ( Coupon BG10LRCMR4 ) :
-...Continue Reading
Posted by Tazkiller85 | Oct 24, 2020 @ 05:03 AM | 6,485 Views
SunnyBag ICONIC & EMAX ECO II - Review Test Démo - ECOlogie & ECOnomie ! lol (18 min 57 sec)

Yep Les Amis,
Vidéo ECO ... Ecologique et Economique ! lol.
Bon Film et merci à tous pour votre soutien .

- EMAX ECO II 2207 1700KV / 1900KV / 2400KV :
- EMAX ECO II 2306 1700KV / 1900KV / 2400KV :
- EMAX ECO II 2807 1300KV / 1500KV / 1700KV :
- Site EMAX :
- Sac à dos solaire SUNNYBAG :
- PowerPack SUNNYBAG :

Lots du Concours PERMANENT :
- Eachine TYRO 79S RTF :
- AKASSO Leave No Trace :
- MJX Bugs 7 :
VIDÉO du Concours Permanent (Comment participer) prochain tirage le samedi 31/10 :
SPEEDY BEE 2 - Review Test Démo - Lancement Concours Permanent ! (17 min 28 sec)
...Continue Reading
Posted by Tomcat Dynam | Oct 24, 2020 @ 01:27 AM | 6,501 Views
Are these features of Detrum Smart DT9 you'd like ?🙂

*Voice broadcasting system
*Charge online
*Wireless Trainer system
*2 timers
*Store up to 250 models
*4096 high section precision sticks
*Vibration alert for alarm conditions and low battery
*Dual antenna diversity
*Flying Date back
*Set programming parameters of ESC online
*Set programming parameters of stabilized or Telemetry receiver
*SD card support ,upgrade and import/export data
*RTH easy with receiver SR86A-G or RXC9 with Z3

#SmartRadio #9ch #airplaneradio #telemetry #detrum

Detrum Blitz DT9 / Sr86A-G GPS receiver (23 min 4 sec)

Posted by VicT | Oct 23, 2020 @ 09:47 PM | 9,537 Views
The free flight models use a de thermalizer system to stop the model from flying away. I wanted to do the same with the Elf and came up with a system that uses the flying stab to stop forward motion and bring the Elf vertically down. I programmed the elevator rate switch C2 to give full up that stalls the model but keeps the model level as it descends. If I release full up elevator the mode resumes flying. The Elf has to slow down gradually before applying full up elevator to get the correct level attitude before the descent starts. My low rate C0 switch postion is programmed for the Launch mode. I have elevator trim set for a high speed throw with about a 80 degree climb angle. At top of climb I can keep her in Launch mode for aerobatics or move the switch to C1 for Cruise Mode with a little more up elevator, or go into Thermal Mode C2 with more up elevator. I have the rates adjusted so that full up stick gives me the correct elevator angle for a vertical fuselage level descent. The Expo is adjusted so that normal elevator travel is available but full stick gives me full up elevator.

In flight adjustment is required to find the correct angle. An incorrect elevator angle will cause a porpoise descent or stall repetition. To prevent a nose down crash release full up elevator to recovery from the stall/crash manuever. Your CG will have an effect on the angle. My CG is slightly forward (2.9 inches) from what Vladimir’s 2.9-3.3 inch range....Continue Reading
Posted by VicT | Oct 23, 2020 @ 09:01 PM | 8,944 Views
After the 6 year old 250 mah 1S battery failure the crash broke the phenolic rudder horn and nylon stab fixture. I used thin CA and accelerator to re secure the nylon to CF boom bond. For the rudder horn I replaced it with aluminum that is bent 90 degrees for a stronger bond to the fiberglass rudder skin. I measured the music wire diameter and used some spare wire to drill a hole in the aluminum for a no slop fit. To fill the void around the rudder slot I used brown Gorilla Glue to expand and fill in the void. I have about 20 throws with no cracking or damage to the repair areas.