aaronredbaron's blog - RC Groups
aaronredbaron's blog View Details
Posted by aaronredbaron | Jun 14, 2018 @ 07:27 AM | 899 Views
I have flown all up and down the west coast, and I miss living there terribly, but Illinois is where my career is! Fortunately I have enough vacation time I try to make a trip home to Portland a priority at least once a year. This year I will be in Oregon from July 13th to July 24th. I will be bringing a quad and perhaps an FPV wing, and I always try to get a good trip to the beach in. If anybody wants to plan a trip to Tierra Del Mar (Pacific City), or other areas for an FPV adventure, please send me a PM. I prefer to hit up those kinds of spots on early week days when nobody is on the beach. If you want to do some slope soaring, I won't have a sailplane with me, but I would LOVE to get get some lift. Living on flat ground in a windy area makes a sloper itchy. It makes me want to slope soar every highway overpass, tree line and building, but I've pretty much given up on micro urban sloping, although I think there is still promise there. I will be staying in West Linn at the 'rents, and there is a great little float flying spot on the Willamette.

Also... I will be helping a dear friend's widow make some space, he passed 13 years ago now and his entire basement is still filled with models. Its time to give them new homes and give her some closure. A lot of it may be old half finished projects or swap meet finds from an eon ago... I will be posting on here in the classifieds when I figure out what's what, but if you want a beater for a trainer or a project for a rainy day I...Continue Reading
Posted by aaronredbaron | Jan 30, 2018 @ 10:01 AM | 2,714 Views
another archive from my old website, great day. FPV on Mt. Hood in 2011

I have always wanted to fly on Mt. Hood ever since I got into FPV, and with my new Custom Widebody Stryker proving to be a great platform for the GoPro HD camera I headed up to the mountain with my Wife on a clear windless winter day. This Stryker was cut in half and widened 5 inches to make room for equipment and carry the GoPro. I am using an Eagle Tree OSD Pro, an FY-20 stability device, a 300 mw 1.28 gHz video transmitter with a V antenna built into the vertical stabilizer, and a 72 mHz PCM receiver. My motor of choice is a Mega 16/15/7 for its efficiency, and I’m spinning an 8×6 propeller. The max current draw is 19 amps at sea level with this setup, but I was under-propped on the mountain and could only draw 15 amps. I would go to a 9×6 if I fly on the mountain again. Everything on the Airplane is powered by a single 2200 mAh 3 cell Lipo, and I’ve built a power filter and 5v regulator system to power the video transmitter and GoPro. My ground station uses an Eagle Eyes system for diversity from two cheap “12 channel” receivers with stock DiPole antennas, and I’m flying with a hacked pair of Trimersion goggles. My Transmitter is 72mHz. Somehow I managed to even cross my landing marks in the snow with nearly identical landings. A special thank you to my Wife Dustine for helping me make this day possible and taking pictures. Sit Back and enjoy the ride! (Please forgive the half finished covering, I couldn’t pass up the chance to fly in this weather!)

Northwest Adventure Flying on Mt Hood (5 min 37 sec)

Posted by aaronredbaron | Jan 30, 2018 @ 09:51 AM | 2,182 Views
Another waybackmachine archive, this one kind of painful from 2009- trying to keep the hobby shop going as an online info resource...

We thought we’d include you in the latest things going on around here at Baron’s Hobbies. If you’ve been following us from the start you’ve seen our transition from an RC hobby supplier to an information source. Well, we’re not through changing yet and for the better. For us to really help bring the sort of information you’re interested in, we’d love to hear your requests or questions you may have for our expert staff. If you are an RC aviation enthusiast we are looking for people interested in contributing their stories and experiences.

Looking For Reader Feedback

As you may have seen we’re not fair weather flyers and the snow is not going to stop us from getting out there and enjoying the skies. We’d love to hear about what others do in the off season and the die-hards that get out there in rain or snow. Tell us about how you cope with the off season. Do you fly in the rain, snow and cold?

Stay tuned here to Baron’s Hobbies for upcoming improvements. In the coming weeks we will be covering the AMA convention in Ontario, California, and doing several interviews with well known pilots. In addition, we are excitied to be introducing a highly skilled modeler to our readers as a new contributing author. For automatic updates on our latest articles, please click on the RSS feed in the upper right corner of the page and subscribe.
Posted by aaronredbaron | Jan 30, 2018 @ 09:49 AM | 2,199 Views
I dug this up from my old website- long gone but I found it on the waybackmachine -this one from 2009

This second installment will cover my middle school and high school years, ending with my graduation from high school at the turn of the century. When I left off in the first part, I was writing about my trusty Gentle Lady glider. Shortly after starting middle school, my Gentle Lady met its fate when the radio was shut off in flight while flying at Mary S. Young State park. I had the switch mounted on the hatch, just below the propeller for the pod-mounted .049. My little Cox engine had the really old sping starter which hooked around the prop, newer versions used a plastic cam, but mine actually grabbed the prop itself. I had so many flights on it the spring cut through the prop, and the loose blade hit the switch, damaging it and shutting off power to the glider in the middle of a nose down turn. My Gentle Lady hit the ground and just crumpled after all the repairs I had done.

Stepping Up

Early in middle school I received another model from my cousin Leon, scratch built from a pull out plan construction article in Model Airplane News. The low wing Be-Tween (plan number X07912, still available from Model Airplane News!) was typical of Leon’s builds. It was built straight, strong, and lightweight, and I felt mine was even better looking than the one in the magazine! Although the Be-Tween was a great little plane, it wasn’t until a year later when he sent me a...Continue Reading
Posted by aaronredbaron | Jan 30, 2018 @ 09:46 AM | 2,221 Views
I dug this up from my old website- long gone but I found it on the waybackmachine

Wednesday June 25, 2008 West Linn, Oregon- Welcome to Baron’s Hobbies. This is Aaron Shell’s autobiography, Aaron is the publisher of Baron’s Hobbies. Baron’s Hobbies is the culmination of a lifelong pursuit of all things that fly by radio control. Watch for posts in the Aaron’s Biography category for the next chapter in my diverse exposure to the world of RC. Let me take this opportunity to introduce myself and tell my story. This first chapter covers the time I was 5 -12 years old.


Aviation triggered something inside me at a very early age. My first word may well have been “airplane,” and most of my firsts indicated I had flying on the brain. My first lego models, drawings and stories written in grade school, were all about airplanes. I have been a participant in the fascinating world of radio control flying since I was in the second grade. Sitting on my cousin Leon’s knee during a family event when I was about 5 years old, he told me stories of radio control gliders circling in bubbles of warm air and climbing without power with the birds. Images of those majestic lumbering floaters traversed across my minds eye and continue to drift across my sub-conscience to this day.

I began flying when Leon sent me an electric Cox EZ Bee Trainer in 1988. The model was actually pretty advanced for its day; with a foam airframe, a polyhedral glider type wing, a geared electric motor...Continue Reading
Posted by aaronredbaron | Jan 30, 2018 @ 09:39 AM | 2,053 Views
Two of the best years of my life were poured into RC Heli Magazine’s early years; I spent 2006 to 2008 living in southern California working as the Editor of RC Heli Magazine. After moving back to Oregon in 2008 I wrote a few articles a month for them as a contributing author. Unfortunately the Magazine is no more, it was decided to shut it down for good at the end of November 2011. I greatly value the friends and experiences I gained from working at the magazine. One of the pinnacles of my career was interviewing Chuck Aaron for the magazine and going for a ride in the Red Bull BO 105. While the magazine had its ups and downs, I’m proud of the work I completed for the magazine, and I will miss being a part of the RC Heli Magazine team.

Video of my ride in the RedBull Heli
going for a ride in the Red Bull Helicopter (14 min 33 sec)