hugo secondname's blog View Details
Archive for May, 2021
Posted by hugo secondname | May 04, 2021 @ 09:04 AM | 2,011 Views
I've read lots about foam edf jets and found many plans for some on RC Groups. I've decided to build an f-22 raptor and power it with a 25mm edf.
I 3d printed an edf hull (or whatever the bit around the prop and motor is called) and put a 10000 kv motor in it, turning a 4 bladed prop.
The motor is running of a 450mah 2s tattu lipo battery and a jamara xetronic 3a esc. All the components are rated for 1-3s lipo. Trouble is, when I run the motors on full throttle for more than a few seconds, it bets unbearably hot and starts to smell weird. I'd appreciate it if anybody could help me find a solution to this problem, so I can continue my build.

All help is appreciated,
Hugo S.


Ps: here's the link to the motor : https://www.amazon.de/Happymodel-Sai...60&sr=8-3&th=1