Mk9's blog View Details
Archive for March, 2021
Posted by Mk9 | Mar 14, 2021 @ 06:17 PM | 9,990 Views
This is a half sized, pusher version of the full size 50mm EDF design Dominic has done. It's now added to the Cults package.
Without a build guide so far, ask for help here and we'll try and step you through:
https://cults3d.com/en/3d-model/vari...ale-950mm-span

135g AUW, printed in LW-PLA, no infill required.
Battery is 350mah 2S, and the motor is a Turnigy D1104-4000kv, sadly not in stock atm. Hopefully there are many other options.
https://hobbyking.com/en_us/brushles...04-4000kv.html

There are only videos blustery conditions, but she handles them quite well. Have now had one flight in calm conditions and she flew really well, but probably still a bit too fast for small indoor venues. Flight time is upwards of 5 minutes.

A gentle discus launch grasping the strong point of the wing/fuse join is the way to launch. NOT, as shown in the first video below:
RC 3d-printed mini Vulcan maiden flight (3 min 51 sec)

like this!:
3d-printed mini Vulcan at KAMS Warbird Day 2021 (2 min 41 sec)
...Continue Reading