Posted by DutchRC | Today @ 11:25 AM | 293 Views
Howdy people

another new Diatone quad?!?! :O ahhh well sure.. why not :P And you could be mistaken to think All new offerings in this space ar Light Weights..
I'm happy to see at least this one is Also fun to fly in a sporty way

Link to one of them: Diatone Roma L5 digital version

I should add that was a bit disappointed by the flight-experience at first.. It definately needs a different tune

First look + a few test-flights

Diatone Roma L5 ! :O 4S & 6S - Digital or Analogue - First Look + Test Flights (30 min 8 sec)

Feel FREE to add your thoughts / experiences /video's / questions to this thread!

type: Long range FPV cruiser
wheelbase: 214 mm
base thickness: 4mm arms
material(s): carbon fiber + allu
dry weight: 215 grams
flight controller: Mamba F722 AIO Mk1 board
firmware version: Betaflight 4.2.5
ESC's: Mamba 35A Blheli (AIO board)
motors: Mamba 2004 1700 Kv or 2900 Kv
propellors: Gemfan 5125 3-blade
FPV camera: Caddx Nebula Pro (for DJI)
VTX: Caddx Vista / DJI Digital
Lipo: 1050 mah 6S or 1300 4S
OSD: yes, by DJI
smart Audio: DJI Digital
buzzer: yes
LED's: nope
spare props: nope. 1 set in the box
Posted by kathyy | Today @ 09:28 AM | 397 Views
I have an unfinished Focke Wulfe 1990 D-9 by PICA. Don't know what to do with it nor do I know what to sell it for. 65" wingspan, 730" area - for 4 to 6 channel radios and .60 engines. Choose from 3 versions (stated on box). Kit RC - 3 1st place winner at US National Champs. Parts made: wings, and fuselage. Any suggestions? Throw out, sell, put back in the rafters?
Posted by ARGliding | Today @ 08:27 AM | 475 Views
Note to self, do not preform a loop below the tree line

delta chase round 2 oops (7 min 26 sec)

Posted by GroundControlRC | Today @ 08:12 AM | 467 Views

Dancing Wings Hobby PITTS 450mm Aerobatic Brushless Micro Biplane BNF Kit - Review Part 5 Conclusion

Get One Here: DWH Pitts 450mm Wingspan Aerobatic Biplane

RadioMaster TX16S Multi-Protocol OpenTX Transmitter

Get One Here: RadioMaster TX16S Transmitter

Here is a link to the Video:

This Plane is Courtesy of Banggood, I want to than Banggood for sending this Plane for Review ;-)

2 Pairs HQprop Durable T5X3 5 Inch 5030 Propeller

Banggood GCRC

You can help support us by using our affiliate links to the products above. A small commission (At No Cost To You) helps us buy more items to review.

#GroundControlRC #GlueAndFly #GCRC #GFS #ScratchBuildPlanes #DancingWingsHobby #Pitts450 #PittsBiplane #RadioMaster #TX16S #OpenTX #4in1Module Best Cheapest

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Ground Control RC™ Glue & Fly™ Series Scratch-Build Planes

Consider Supporting Our Channel by becoming a Patron at:
Patrons of the Channel will have access to the latest Aircraft Plans & Exclusive Content!

See Us On Youtube | Patreon | RCGroups
Posted by Old_Pilot | Today @ 07:49 AM | 531 Views
Well, she flew just fine......until I hit a dirt clod on the runway and sheared the blades off both fans......I knew the fan intakes were low, but I thought I had enough clearance....Oh well, I'll go back to putting the fans higher on the and learn
Posted by Jack Crossfire | Today @ 02:48 AM | 817 Views
5 miles went down like a brick. The webbing kept the tire from sliding 1 way, but the adhesive did nothing to keep it from sliding the other way. The result was part of it sliding away & part staying in place. That rules out farstening at any single point. Too bad TPU can't stretch like rubber.

Been putting off upgrading the camera controller because it's so rarely used, but it definitely needs an amplifier.
Posted by | Yesterday @ 11:04 PM | 1,070 Views
I've written a basic guide on the cheapest brushless setup that I'd recommend for the 144001. I've been beating on this car for a few weeks now and can say that the setup is robust on 2s. Advantages over stock are:
  • 60 km/h top speed
  • much faster acceleration
  • Double battery life (about 15 minutes vs 6-8 stock)
  • Much more durable due to less weight in a crash
  • Bettery for jumping and cornering due to better weight distribution

Here is the article:

[QuadifyRC] 144001 Upgraded with the cheapest brushless setup worth doing (0 min 7 sec)

Posted by lawrence4 | Yesterday @ 10:54 PM | 1,080 Views
Lalysee C.G 125mm gliding ability test (4 min 22 sec)

uninstall rest balance lead 5.3g,
Total weight 157g
C.G 125mm
Wing load : 8.97 g / dm²
elevons setting unchange
great gliding ability

when motor off Lalysee will be automatically turn circle, not found thermal airflow today.

2S 350mAh glide flight time 13mins
single cell 3.75V
Posted by Dirtflirt | Yesterday @ 10:45 PM | 1,089 Views
I spent a few days w B at the farm.
The weather was great and we flew a lot.
There was some carnage however & some fails .
We got a few wins snuck in there though.
We flew a couple deltas as the third was under powered.
My dark jeti suffered a lil setback, back to the drawing board, I think a 12 blade 6s will do it.
I chased AR's planes around w the new Dji fpv drone ,man that was fun, and I even let b take a spin in it.
Finished it off with,(of course) w the dirt flirt and a soul crushing hangover.
The drinks started after the flying of course. We are dangerous enough sober.
I will post more vids here as i can ,there is a ton of vid .Im sure ar will be posting plenty as well .
happy flying guys

First fpv chase (4 min 9 sec)

cub chase full flight (6 min 35 sec)
...Continue Reading
Posted by Justwingit | Yesterday @ 10:41 PM | 1,135 Views
So I shot this video right after the New Year, and managed to misplace it on the computer !

Found it by accident recently...some things are better late than never I suppose :
Hobbyzone Super Cub LP at the Playa in Newberry Springs (11 min 34 sec)

Enjoy the shenanigans and please don't forget to hit that Like, Subscribe, and Notification Bell !

Posted by GBLynden | Yesterday @ 08:31 PM | 1,204 Views
In this video, I fly the E-flite T-28 Trojan 1.1m BNF Basic RC Warbird Sky Ripping With Mountain Views for the second time. My landing was not great, but that is ok with me after a fun flight like that!

E-flite T-28 Trojan 1.1m BNF Basic RC Warbird Sky Ripping With Mountain Views (6 min 8 sec)

Posted by JohnCC | Yesterday @ 09:05 AM | 1,967 Views
ESC - Configurator, a utility designed to simplify updating and configuring of your ESCs.

ESC-Configurator: BlueJay Firmware Troubleshooting & Music 🎵 (Mobula 6 Setup) (16 min 8 sec)

Bluejay is BLHeli_S based firmware capable of bi-directional DShot - so a great choice if you want to run RPM filtering on your rig. This project also aims to clean up and simplify the original BLHeli_S source code. A startup sound editor is also part of the deal.

I flash it to my Mobula 6, some problems and issues occur -- 1 motor stops spinning after the flash of the firmware.

The technical troubleshooting is all left in. Full chapterization.
Posted by ShonanBeachRC | Yesterday @ 08:36 AM | 2,001 Views
I took my ZD-Racing MT-8 (Pirates 3) to the beach again, I'm having a lot of fun with it! Sry about the wind noise!

ZD-Racing MT-8 RTR buy it here!
ZD-Racing MT-8 Without electronics buy it here!

Please visit my website!

#rccars #banggood

RC Monster Truck Beach Bashing! (3 min 37 sec)

Posted by lawrence4 | Yesterday @ 06:55 AM | 2,112 Views
Lalysee C.G 120mm test flight (5 min 14 sec)

uninstall balance lead 5.6g,
Total weight 162.2g
C.G 120mm
Wing load : 9.27 g / dm²
elevons setting unchange
more gliding ability
more speedy
Posted by ARGliding | Yesterday @ 06:36 AM | 2,147 Views
Jimmy aka Dirtflirt got a new toy and it's pretty damn cool. He has been itching to get a chase video of my CCub.

cub chase full flight (6 min 35 sec)

Posted by Wind burn | Yesterday @ 04:38 AM | 2,323 Views
So this is a pike perfection that came to me with a shattered tip.The repair was done several months ago,but some have said I should post some photos of the repair process I use. I've compressed this down because there are 83 photos during this repair but these will show the main process. ** There are many ways to repair hollow molded wings everyone has a preferred method this is just mine. The wing remains hollow, and I get good results without using body fillers or foam internal fillers. and In the end the repair is as close to the original in layup and materials as I can get.***
Here goes! ...tap view all images....Continue Reading
Posted by Jack Crossfire | Yesterday @ 01:06 AM | 2,507 Views
As these things tend to do, the stakes have been raised to get a reasonable combination of traction & range. There was a partial hexogrid tire which proved too soft for the cost.

Because it takes so much more material to make a flat tread stiff enough, the decision was made to go back to a PETG hub with a thin TPU tire. This would limit the compression if the tire completely compressed. Helas, PETG is noticeably heavier than PLA, despite its heat resistance. It could probably get away with PLA since the motors rarely get flaming hot. The biggest weight savings may be abandoning the hexogrid. Like the SpaceX logo & the isogrid, sometimes you just want it to look good.

The lion kingdom has evolved its 3D printing game to the point of making the thinnest possible lines & planes with the thickest possible layers. The .4mm nozzle can print a .5mm wide line but takes forever. The .8mm nozzle can print a .9mm wide line but is much faster.

Since the tires slip around the hub, there's still a dream of bolting the tires to the motors, but they now have to transfer force a lot farther across a much bigger hub. A 7 hour tire with webbing had good compliance, transferred rotation to the motor, but easily slipped sideways. It would need some kind of adhesive, whether it bolted to the motor, if the hub clamped it as before, or if it clamped around the hub. It might as well be a plain cylinder.