Late99's blog View Details
Posted by Late99 | Nov 27, 2020 @ 05:08 PM | 6,837 Views
I had noted a long time ago that Arm1s Extra seemed to be easy build and at least on paper looked as a good flier. As I had sold my 38" Skywing Edge last winter I was short of smaller plane to fly on the nearby farm field (using asphalt walkway as runway there). And as weather get worse and worse, I decided to build a replacement from all the parts I had laying around.

I'm still waiting for the maiden, so can't comment yet on the flight performance, but the build was quite fun & rewarding. Check full 1m MiniExtra story!
Posted by Late99 | Nov 10, 2020 @ 03:30 PM | 9,716 Views
Yet another repair project. An old 2m RET glider that my friend gave to me for repairs. This plane has been neglected for a long time, but at least wing seems pretty ok.

The plan is to rip all covering off, do necessary wood repairs, full recovering and put modern electronics in the plane. And yeah, canopy has been lost so need to build one.

Originally plane has been designed for brushed (heavy) setup, so I probably need to put motor in front of firewall to reach CG.

And still I haven't identified what exact kit this has been. If anyone knows, please tell.

Update: Added teaser pics of the re-maiden ready plane.
Posted by Late99 | Oct 11, 2020 @ 03:02 PM | 2,079 Views
In early August we had another flying gathering at Piikajärvi. Had a blast there and finally saw turbine Tucano flying.

Check the full gallery! At least worth to see the video where Tucano performs a crash landing with nose gear only partly extended. Fortunately the damage was quite limited and the bird was flying quickly again.

I also cracked my landing gear & had some aileron trouble. I already wrote a repair story on those.
Posted by Late99 | Oct 04, 2020 @ 07:56 AM | 1,653 Views
One hard summer of flying gone with the Yak. Yak was my windy weather flyer and due to this it didn't go fully without incidents. I've had plenty of flying at Piikajärvi airfield and it has a paved runway - and this summer the wind always seemed to be strong side wide to the runway. Landing in the strong sidewind is somewhat challenge. You need to straighten the plane just at the right moment or the plane tends to jump sideways on main landing carriage which is really hard to carbon fiber landing gear.

Rewind a bit... The plane flies well and in early August I was at Piikajärvi once again and training my pop top timings - Yak differs quite a bit in this regards to my Extra. Started to have a bit too fun - until noticed whistling sound the plane made... A slow flyby and yeah, one aileron was flipping freely in the air. Fortunately one of those huge ailerons is more than enough to fly the plane!

Safe landing and it was evident that servo had pulled the horn & balsa out of aileron. Based on the damage, there wasn't quite enough of epoxy glue in the horn originally.
Posted by Late99 | Sep 21, 2020 @ 03:26 PM | 3,430 Views
I've been way too lazy in blogging anything here. This has been one weird year so far, but we've managed to fly decently. Here's first batch: spring time bootcamp again at Piikajärvi airfield.

Check full gallery with videos, it's well worth it!
Posted by Late99 | Jul 11, 2020 @ 07:12 AM | 6,475 Views
Some action shots of me flying my 95" 3DHS Extra during last autumn (2019) against some dark clouds. Typically these photos are rare finds as you just can't take pics of yourself flying .

Thanks Kevin Rowland for the photos!
Posted by Late99 | Aug 20, 2019 @ 02:20 AM | 3,313 Views
We made a weekend trip from Finland to Wings over Europe event in the north France to visit a bit bigger venue than our local events. Also wanted to see Jase Dussia flying live. No personal flying though, as we flew to Brussels and just took car rental to get to the Maubeuge airfield and couldn't carry any planes with us.

We arrived Friday evening just to catch some of the last demos and spent Saturday on the site. On Saturday the weather was rainy, but I think that helped Aerobertics sales as people kept drooling at the display planes and fortunately the weather allowed key demos to be flown.

I took plenty of pictures on site, please go see the full gallery!

The event had to be the biggest concentration of Extreme Flight planes in Europe at the time!
Posted by Late99 | Jul 08, 2019 @ 03:54 PM | 6,067 Views
Finnish Aerobatics Championships were held this year at Malmi airport in Helsinki. And as it was pretty close to us we went to watch the Advanced class with my son for some time. Actually I haven't ever before seen real aerobatic flying in competition.There was also gathering of US muscle cars & sports cars at the same time.

Malmi airport was first airport in Helsinki, but now the city is trying to claim its land for building houses, despite the old airport buildings having historical value and the airport being the only place near Helsinki supporting flying training and recreational flying.

I took the opportunity to snap some photos of the activities... Please see full gallery & videos (DC3 takeoff etc) at Google Photos.
Posted by Late99 | May 22, 2019 @ 04:09 PM | 4,923 Views
Back at first round of the national championships for the third time. I still competed in sport class as honestly I haven't had time to start learning more difficult programs and I still don't have a plane that would suit them. My 95" 3DHS Extra is great flying plane, but due to it's size and 12S battery it's not suited for higher classes (2m and 10S limitation).

Probably the most interesting thing was that Lassi Nurila was using his new plane in the competition. Lassi has been designing and building this plane through the winter and based on what I heard it will enter some kind of production (meaning it will be available for purchase!). When compared to Sebastiano Silvestri's three plane and Gernot's Pandora I prefer Lassi's plane streamlined look.

Lassi is still fine tuning the setup, so it's very interesting to see how this season and big competitions in Europe will go for him.

See full photo gallery on Google Photos.
Posted by Late99 | Feb 24, 2019 @ 05:06 PM | 5,509 Views
During our winter holiday I visited Finnish Air Force Museum in Tikkakoski (central Finland) with my son after several years. This place is worth the visit as the planes are well displayed and there's some unique planes, too.

Some highlights:
- Brewster Buffalo (BW-372)
- Bristol Blenheim IV
- Messerschmitt Bf 109G
- Mig-21 (ouside, cockpit inside)
- Saab Draken

See all photos!
Posted by Late99 | Feb 13, 2019 @ 05:08 PM | 6,113 Views
I'm a lot overdue with this...

I started to drool at 3DHS 95" Extra 330SC as soon as first info of it surfaced on Internet. And I basically ordered one as soon as they were available in Europe.

The first items I received were motor & prop. On this build I went with Dualsky GA6000.8 motor and got carbon fiber 24x10 prop (electric, lightened) and matching spinner from Meijzlik. I will use my existing Savox 1270 servos the plane. Couple of them have seen a bit of use, but basically there are as new.

The plane arrived quickly and without shipping damage, everything was really well packaged. Upon unpacking I immediately noticed that the quality of the finish on this plane is top notch.

The plane assembly went without trouble, let the pictures speak for themselves....Continue Reading
Posted by Late99 | Oct 14, 2018 @ 01:15 PM | 5,872 Views
Just enjoying nice summer evening with my Extreme Flight 70" Extra 300 EXP. Video footage taken from different perspectives during 2017 on several flights, but I managed only now to compile it into a full video. This is nothing extra special, but haven't seen too many onboard videos from aerobatics planes lately.

3D flying & onboard video - Extreme Flight 70" Extra 300 EXP (4 min 43 sec)

Setup flown on the video:

Extreme Flight 70" Extra 300 EXP
- Dualsky XM6350EA-9 motor
- Castle Creations Phoenix Edge 100 ESC
- 3 x Turnigy 1268HV digital servos
- 2 x Hitec 7245MH digital servos (elevator)
- Turnigy Nanotech 5000mAh 6S LiPo main battery
- Turnigy Nanotech 1000mAh 2S LiPo receiver battery
- Spektrum DX9 transmitter, Spektrum AR9110 receiver
(sold the plane early summer 2018)
Posted by Late99 | May 20, 2018 @ 01:26 PM | 6,403 Views
May has been exceptionally warm here in Finland and that has meant good flying opportunities for hobbyist. During weekend I visited Piikajärvi airfield where local flying club was spending their bootcamp. The location turned out to be great, there was plenty of space for both full size airplane / sailplane activity and RC flying. They also had nice club house etc. The place is certainly worth visiting again!

I flew my new Extreme Flight / 3DHS 95" Extra 330SC and old 70" Extra EXP there. Weather was somewhat gusty, but bigger planes didn't seem to be too much affected by it.

Took plenty of pics. View full gallery here.
Posted by Late99 | Apr 02, 2018 @ 06:47 AM | 7,507 Views
Once again I needed myself a winter / spring project. This time I found an abused Electrify Ultimate 3D bipe. This is a quite small and old bird. Due to small size I felt it's quite fine practice project for both wood repair & covering job.

Covering on the bird was in really bad shape and the plane had seen some flight damage. Maybe stuck in tree or something like that. Cowl is a bit busted and both wings / ailerons have some damage. Also fuse has cracked wood here and there.

My plan is to strip all covering off, fix the structural faults and then cover the plane with a new scheme. The challenge here is mostly caused by the fact that top wing is glued and not easily removable, I'll need to do some heavy hacking to get it off. The cowl will also need some fiber glassing, spackling and painting. Fortunately the canopy is in good shape.

The plane came with motor and servos, but without ESC. Servos are Futaba S3114s while motor is Rimfire 35-30 1250kV. I plan to test the servos thoroughly and use them if they work. Maybe just switch a stronger & newer servo for elevator.

This will be a bit slow repair as I'm not in a hurry with it and have some other projects ongoing, too.

Old thread on this specific model @RCGroups.
Posted by Late99 | Mar 22, 2018 @ 04:20 PM | 7,020 Views
I'm way overtime with this. My total flight time actually decreased from 2016 quite a lot, but I concentrated better to couple of planes and actually got more flight time with them. Also now the majority of flying was made with larger planes. They stand wind better and you can get more easily flying time as you don't need to nail every occasion when there's low wind. The spring was good from weather perspective and I got a lot of flights. However, the end of the year saw lousy weather and I didn't manage to do too much flying.

Name: 2017 Flight Times.PNG
Views: 43
Size: 23.9 KB

I participated two rounds of our national F3A Sport class and won both. And as there was only three rounds I ended up being also F3A Sport class cup championship. The sport program is really easy to fly, but it was good training to get used to competition pressure. Also the wind on both rounds was quite strong & gusty and this gave me advantage as I was flying the biggest plane in the sport class.

Name: Competition.jpg
Views: 37
Size: 302.4 KB
Description: ...Continue Reading
Posted by Late99 | Dec 02, 2017 @ 05:11 PM | 7,584 Views
The lousy weather during last two months have kept me grounded more than I would have hoped. However, I have been able to catch flight here and there. Seems like my 70" birds are almost the only ones I fly at the moment. I've also sold many of the other planes and I'm hoping to get a new bigger bird, but let's leave that to later....

Few autumn pics for you guys to enjoy.
Posted by Late99 | Jul 24, 2017 @ 03:09 PM | 8,514 Views
I managed to participate also the second round of Finnish championships league. Surprisingly the weather was again sunny, only the wind was a bit gusty causing challenging landing conditions for several competitors.

Several of the competitors also continued directly to Nordic F3A championships held in Denmark (Lassi won the championship).
  • FAI 1st: Lassi Nurila
  • Nordic 1st: Emma Tuunala
  • Sport 1st: me