timmybeetle's blog View Details
Posted by timmybeetle | Oct 31, 2011 @ 03:23 PM | 6,261 Views
Hi fooks

this was my second plane and it flew very well, but sadly my flying skills weren't that good in beginning so I crashed a couple of times.
Also flying to the limit is something you can do but be aware of wind.....

After my last major crash I put it in the garage and last week I started to rebuild this plane.
I glued wing to fuselage because my front was completely damaged.
Also I cut of cockpit in order to get inside fuselage to assembly servo, rcvr and access to LIPO, esc area.
Also I use an elevator part (yellow) from my crashed P51D ArtTech Mustang, this plane was ready for the trash so I trow it away.

I use an 3536-910KV motor no brand ECS 30A and a 3S2200 LIPO.
Prop is 10E7 and last Sunday (30-11-2011) I performed a first test flight.
I had to adjust my elevator and ailerons and noticed that motor had to be adjusted to give more down and side trust (right).
Also I moved aileron servos into wing to have a direct control of these.

So tonight I painted my Bearcat in a new color layout and will do some fine tuning.

Today 1 november 2011 finished my rebuild see pics below.

Also I have to make me a new cowl and than I will see how it ends...

Bearcat F8F Maiden Flight (1 min 25 sec)

Bearcat F8F Second Flight (4 min 11 sec)
...Continue Reading
Posted by timmybeetle | Oct 01, 2011 @ 03:37 PM | 6,395 Views

Visit here too see my vids


also interesting stuff


Also one of my favorite planes.

I only had to adjust a small amount of rake for LG.
I got a V1-1/2 because flaps where installed? only motor was 3648/520Kv with a 3 blade prop holder.

I bought me a 4 blade adapter and prop and that's giving me 800 watt's of power and 3200 grams of static trust, weight of plane is around 2200 grams.

Also I painted cockpit area inside black and outside blue.

and I make this Bomb, air outake mod. see pics

after flying this plane last year I was tiered of assemby wing, so I modified it..

works perfect for me,

LG didn't work anymore so I modified that also plus motor.

see here



greets Hans

May 2013 prop update and 3"dubro Diamond Lite Wheels

I changed my Wheels by 3" Dubro see pics, also I wanted to modify my prop too a bigger one from FMS 1700mm P47.
I can change back to stock 4 blade prop just wanted to see how it looks and do a testflight when weather is ok.
I have an Turnigy 5055-580Kv motor in it so I have to be careflul with throttle...
Will do a power measurement when I'm on flying field.
Just tested at home with a 3S200 Lipo it seems to run smoothly.
4...Continue Reading
Posted by timmybeetle | Sep 30, 2011 @ 04:06 PM | 6,727 Views
Hi flying friends

some mod's on my Spitfire.

Origenal LG made from plastic didn't hold, so I had too modify it again.

look here...https://www.rcgroups.com/forums/show...postcount=2468

and also https://www.rcgroups.com/forums/show...postcount=2474

tested it and very happy with result, flying perfect and most importand takeoff and landing better than before,,,,

My second Durafly Spitfire

Recently I bought me an second hand Durafly Spitfire at Ebay.
It is an earlier version because it has another battery hatch.
I started to remove paint and moded cockpit , moved it a little forward and lowered inside a bit.
Also I modified my LIPO hatch and I placed servo holder for elevator and rudder more back.

I also have to do LG modification on this one.

Motor I use is an Aolian 4250-800KV and I will use and 11*10 4 blade prop.

update will follow.

30 Juli 2012

Today did my LG mod, this time I use 10mm wood rails 70mm long, to mount servoless retract units.
pictures show how I did it and also rake I use in my spitty's
aslo I use LG legs from FMS Spitfire 1400mm

2 aug 2012

all electronics installed and tested, painted Spitfire and waiting for decals
greets...Continue Reading
Posted by timmybeetle | Jun 23, 2011 @ 03:35 PM | 6,446 Views
I fly more planes at this moment I have/had

**. Art Tech/Hobbyking Spitfire 900mm (byond repair in trashcan)
01. Durafly/HobbyKing Spitfire 1400mm
**. Ripmax Spitfire 1200mm ( sold may 2012 )
**. GWS F4U Corsair 850mm ( sold to friend from flying club may 2012 )
02. Nitroplane Airfield P47 750mm
03. Nitroplane Airfield F4U 800mm
**. HobbyKing P51D 1200mm ( sold nov 2012 )
04. FMS P47 Thunderbolt 1400mm Tarheel Hall
**. Thunder Tiger F8F Bearcat 1/12 ( grounded 2013 , in trashcan2016)
05. FMS ZERO 1400mm ( 2012 )
**. Parkzone Spitfire MK9 1100mm ( dec 2012 ) Sold aug 2018
**. E-domodel Phantom F4J 628mm EDF 64mm ( crashed at landing 01 may 2013)
**. Lindinger Phantom F4J 720mm EDF 70mm (crashed and byond repair 18-6-2014)
06. Airfied/FMS Corsair F4U 1400mm
**. FMS B25 Mitschell 1450mm 2012 ( sold aug 2017 )
07. Durafly/HobbyKing Spitfire 1400mm Version I
08. EFLITE Hawker Hurricane MKI 1360mm
09. Parkzone Focke-Wulf 190 1000mm ( 2013 )
10. FMS T-28 TROJAN 1400mm
11. HK Balsa BearCat F8F 900mm
**. Parkzone BF109G 1100mm ( Sold jun 2015 )
12. Multiplex FunCub 1400mm
**. Airfield/FMS P47 Thunderbolt 1400mm Jackie Revenge ( Sold aug 2017 )
13. Parkzone P47 Thunderbolt 1010mm convert to Razorback
**. Durafly Vampire Special Edition 1100mm build may 2013 ( Sold okt 2020 )
14Durafly Vampire converted to Pusher build ?
**. Durafly Vixen 1000mm build nov 2013 ( crashed byound repair aug 2017 )
15. Hobbyking/ArtTech Spitfire 900mm build march 2014
...Continue Reading