junglegym's blog View Details
Posted by junglegym | Sep 17, 2020 @ 11:13 PM | 2,427 Views
Posted by junglegym | Dec 22, 2014 @ 09:26 AM | 9,321 Views
Patrouille Suisse FunJet (5 min 7 sec)

Posted by junglegym | May 12, 2014 @ 09:56 PM | 10,786 Views
Micro quad 2.4g Tx , AUW 11.5g
Tx is mode 2 with these quads, people hack the Tx converting it to mode 1 but I've got a mode 1 Hubson 4x Tx coming , the Tx for the ProtoX and Hubson are interchangeable the Hubson Tx is bigger and has more features mode 1 or 2 , High /low rates, tricks etc. All work when you use the X4 Tx with the Proto X .
Hubsan X4 Vs. Estes ProtoX - Which is better?!? (14 min 20 sec)

Posted by junglegym | Jul 12, 2013 @ 10:56 PM | 12,069 Views
Multiplex Funjet Ultra Push/Pull config.

Reverse rotation prop on front standard prop in pusher config on rear , 2x BL motors, 2x ESC,2X Lipo batteries .

2X 1900mAH 3s 35c .One front mounting battery , Second pack mounts in rear through hatch made in turtle deck .

2X https://www.hobbyking.com/hobbyking/s...g_0_12sec.html
2X https://www.hobbyking.com/hobbyking/s...idProduct=7993
2X https://www.hobbyking.com/hobbyking/s...dProduct=14873
1X Rear (Pusher) https://www.hobbyking.com/hobbyking/s...dProduct=22422
1x Front https://www.hobbyking.com/hobbyking/s...dProduct=23035
Posted by junglegym | Feb 13, 2013 @ 02:23 AM | 14,670 Views
Pusher prop car
Posted by junglegym | Jan 03, 2013 @ 06:26 PM | 17,197 Views
2010-08-22 01.24.14 (2 min 52 sec)

Wasn't happy with bungie launch on this model even on a hot day with a stiff breeze sink rate was pretty amazing given it's weight and size.
Never get to a slope .So
Conversion consists of a completely separate system for throttle , seperate Eflite 200mAH 2s cell lipo, a 8amp speedie , second DSM2 Rx . Removal of the tow release assembly.
Prop Graupner 4" cam prop





http://www.aircraft-world.com/shopexd.asp?id=1251...Continue Reading
Posted by junglegym | Dec 31, 2012 @ 04:59 AM | 14,475 Views
ASK - 21 UMX
Micro glider.

Model looks really nice .
Fits back in original box for easy safe transport.
Carbon reinforcing in wings, tail
Auto stabilizing system AS3X
Canopy fit is poor , inner canopy lining glued in un evenly causing an asymmetrical poor fit, gaps .
Canopy has been trimmed very roughly coupled with the ill fit takes away from the overall quality appearance.
Depression line in wing again pre shipping damage which takes away from the models appearance.
If you want to transport model in it's box.
1) Aileron plugs need to be plugged and un plugged to remove wing for transport, from experience these micro plugs are fiddly and easily damaged .
2)Wings attach with 4 micro screws again these need to be installed and removed each flight, fiddly / easily lose ....Continue Reading