Posted by turbinefancy | Jun 05, 2020 @ 03:39 AM | 6,535 Views
I just setup a new DJI Digital FPV system on my old Taft Cobra Jet. Also improved looks of the instrument panel using pictures from a real F-5E cockpit. Heres A training flight showcasing how well the DJI FPV camera handle low light situations.

Cobra RC Jet FPV Training (4 min 5 sec)

Posted by old4570 | Jun 05, 2020 @ 03:35 AM | 5,739 Views
V911 HLG (0 min 37 sec)


My 3D printed HLG ..

It be a one off 3D print experiment , but there should be a F949 flight board in the mail .

So there might be a more refined version of the V911 HLG in the near future .
Posted by Bella Liu | Jun 05, 2020 @ 03:13 AM | 5,138 Views
Quality Tools are essential to all hobby players. Here! you can find the complete types of what you want for repare and DIY. Logo Customization is available!

Specifications:

Option1:
1.5mm Hex Driver
2.0mm Hex Driver
2.5mm Hex Driver
5.5mm Box Driver

Option2:
4.0mm Box Driver
5.5mm Box Driver
7.0mm Box Driver
8.0mm Box Driver


Colours available: black, red, purple
Materials: Nano-titanium high-speed steel, SKH-51 imported from Germany
Logo customize: available

The best quality you can find.
Posted by Amanda BH | Jun 04, 2020 @ 10:41 PM | 5,900 Views
anybody could share your Brotherhobby Avenger 2806.5 building ?
Posted by GEMFAN ts | Jun 04, 2020 @ 09:26 PM | 6,399 Views
Hey Hey Hey! Gemfan New Gates coming😻😻
How many new types you find?
Let's rock GEMFAN INDOORS TRACK.
Posted by HGLRC Company | Jun 04, 2020 @ 08:57 PM | 5,997 Views
Pre-order now and get a free 2306.5 motor, free HGLRC cap. For first 30 orders only!
Name: Sector5v3_1920_1000.jpg
Views: 0
Size: 1.43 MB
Description:
Posted by old4570 | Jun 04, 2020 @ 08:48 PM | 5,749 Views
Micro F16 Video 5 (5 min 40 sec)


Yes it flies !
Still hunts up and down a little ( rearward CG ) , but it flies .
Motor did not cook the prop off the output shaft ! = Thats nice .
Maybe one more bit of lead shot in the nose ?

But it flies
Posted by lawrence4 | Jun 04, 2020 @ 08:03 PM | 5,992 Views
Space Shuttle Test SUNNYSKY X2212-9 1500KV (6 min 27 sec)


Motor: SUNNYSKY X2212-9 1400KV
ESC: HOBBYWING SKYWALKER 30A
Weight: 530g
3S 2200mAh
6'15"
Posted by Mad_angler1 | Jun 04, 2020 @ 05:28 PM | 6,902 Views
Ardupilot Copter Build Series


I have started a new Ardupilot copter build series where I will be walking though the steps to setup a Copter based hex from start to finish.

In this series I will also be deep diving into some of the more complex hardware setup with multiple GPS, Mag sensors as well as other external sensors.

The series consists of

Video 1 - Basic Hardware - Frame,Motors & Power System

Video 2 - GPS - Serial and CAN as well as multiple GPS blending options

Video 3 - Compass - Mag setup and overview of the new Compass configuration in Ardupilot

Video 4 - RC Types and Setup - Looking at Herelink, Sbus and other RC options.


More Videos to follow.

Video 1 Basic Hardware

Ardupilot Drone Build How-To Series Part 1- Basic Hardware (30 min 40 sec)




Video 2 GPS Setup

Ardupilot Drone Build How-To Series Part 2- GPS Setup (17 min 57 sec)
...Continue Reading
Posted by RanGee75 | Jun 04, 2020 @ 12:14 PM | 4,465 Views
Hello all,
Check the new Lightbutner afterburner for the Arrows Mig-29:
http://www.lightburner.co/product-pa...29-afterburner

Here's a build and afterburner installation video:
Arrows Mig-29 unboxing build and Lightburner installation video (49 min 24 sec)

Posted by unboxingexp | Jun 04, 2020 @ 11:47 AM | 5,496 Views
Tinywhoop with micro HD camera (1 min 31 sec)

This is probably the cheapest way to get hd footage from your tiny whoop. I installed a 5$ sq11 camera on top. In order to save weight I decased it. Quality of the footage is still mediocre.
Posted by DutchRC | Jun 04, 2020 @ 11:12 AM | 4,929 Views
Halloa peoples

Sooo yes you probably know the T-Motor brand and there is a good change you use, or have used them (cause they also OEM for other brands).. But T-Motor has a reputation of making slightly more expensive motors probably?
Recently however they released some Budget motors (Velox) and mid-range (Pacer) motors In the video I review the last ones after doing at least 100 flights with them..

The motors: T-Motor Pacer P2207.5 (4S and 6S versions available) drone motors

For my tests with these motors I used CNHL 1100mah 6S Black Series lipo's.. I would hereby like to appologize to those lipo's :P

T-Motor Value Motors? The Pacer P2207.5 (1950KV) REVIEW (24 min 44 sec)

Posted by alex_nikiforov | Jun 03, 2020 @ 11:08 PM | 6,526 Views
Foxeer Razer Nano 1200TVL 1/3 CMOS Low Latency FPV Camera 4:3/16:9 PAL/NTSC Optional For RC Racer Drone

Foxeer Razer Nano. Бюджетная нано камера за $17.99 (4 min 55 sec)


Link: Foxeer Razer Nano
Posted by simages | Jun 03, 2020 @ 09:51 PM | 5,871 Views
This has been way over due for me.......

Have always planned to finish this into a NASA Cobra AH-1G. I'm sure it will take a little time.....

Still on the fence regarding the finishing theme for the Corbra. I'm so leaning toward the Military version so, I can truly honor the designer of this kit, the late CW2 James R.V. Linder. James also founded Approach Engineering.

Build Thread HERE
Posted by old4570 | Jun 03, 2020 @ 09:32 PM | 5,411 Views
FMS 800 V tail (5 min 32 sec)





Took my FMS 800 V-tail out for a spin .
Just recently flashed OpenTx 2.3.7 , so looks like trims were a little . Or maybe it was that last time I flew the V-tail it was windy ?
Either way ..

Elevator a little touchy , Ailerons a little soft ..
Still , I really like this one . I should fly it more .

Ezio 800 prop VS HK folding prop (2 min 1 sec)
...Continue Reading
Posted by BDOG1 | Jun 03, 2020 @ 04:31 PM | 6,688 Views
I got a chance to duck out and do some sloping today.
The forecast only called for a 1 hr window of the correct direction wind,I have wanted to get out with my 3m Crystal to see if she flew as well on the slope as she had for her maiden "flat land " outing .
Please see below :
Posted by J Morgan | Jun 03, 2020 @ 04:27 PM | 7,734 Views
While I am attempting to sharpen up my old rusty piloting skills in order to maiden the SE-5a and Fokker DVIII, moving on with a larger build
of the Vindicator.
This will be a very light weight build hopefully. Details in the build log here:

https://www.rcgroups.com/forums/show...ndicator-84-ws

J
Posted by jmxp69 | Jun 03, 2020 @ 03:07 PM | 4,768 Views
This is the http://rcvideoreviews.com first look at the ToolkitRC WM150 Watt Meter
ToolkitRC WM150 Watt Meter First Look (9 min 42 sec)

Posted by FR4-Pilot | Jun 03, 2020 @ 02:54 PM | 6,493 Views
After a few years of learning with Proto-X quads, Eachine FatBees and E-Flite Inductrixes (original, Plus and brushless), I decided to give this guy a try:



I don't really expect anyone to read or comment here, but if you do then great.
Regardless, this blog will serve as my notes as I discover and figure things out.

It's been years since I messed with CleanFlight, now it's BetaFlight, so here we go ...