This is the 3S Conversion Maiden Flight of my Eflite UMX F4F Wildcat.
The Conversion process is very simple, but will require 2 (or 3) components to complete the 3S Conversion:
1) Eflite BL180 2300Kv Brushless Outrunner (EFLUM180BL):
https://www.amazon.com/Flite-BL180-B.../dp/B00406LZR2
2) Hyperion 3S 240mAh Babbelbatt Lipo - Can be purchased at RCBabbel:
https://www.rcgroups.com/forums/show...31-BabbelBatts
3) (Optional Part) - Small Parts CNC Aluminum UMX Propeller Adapter:
http://smallpartscnc.com/index.php?r...product_id=167
PROCESS:
The stock BL180 3000Kv Motor is easily removed by unscrewing the single set screw and disconnecting the power cable.
At this point, carefully remove the Foam Prop Spinner from the 120mm x 70mm 3-Blade Prop by scoring around the base of the Prop Spinner with a sharp Xacto knife. Then remove the 120mm x 70mm 3-Blade Prop from the Prop Adapter holding the Eflite BL180 3000Kv Motor by unscrewing the Prop Screw that is holding the Prop and stock Prop Adapter together.
Install the new Eflite BL180 2300Kv Motor in reverse order, along with the Prop Adapter (plastic or aluminum) installed.
Then re-attach the 120mm x 70mm 3-Blade Prop to the Prop Adapter and secure it with the Prop Screw.
Re-glue the stock Prop Spinner with a light drop of Foam Safe CA or Rubber Cement. Make sure the Prop Spinner is centered and rotates evenly.
Make
...Continue Reading