Posted by scousethief | Jun 05, 2019 @ 12:09 PM | 2,136 Views
http://tiny.cc/wpru7y Geekbuying.com LINK CODE : RUNCAM5 will bring the price down to $94.99

http://tiny.cc/tvru7y Banggood.com Link



Runcam 5 vs GoPro Session 5 Compasion Video in 4K (1 min 41 sec)


Description:
Brand Name: Runcam
Item Name: Runcam 5
Color: Black

Specifications:
Image Sensor SONY IMX 377 (12MP)
Video Resolution [email protected] / [email protected] / [email protected] / [email protected] / [email protected]
Field of View (FOV) 145°
Video File Format MP4
TV Mode
NTSC (720*480) / PAL (720*576) Switchable
Communication Interface Micro USB
microSD Card supported Up to 128G
U3 recommended (2.7K50/1080P120 requires
U3 or above; other solutions require U1 or above)
WiFi Nonsupport
USB Power Input DC 5-15V
Battery Capacity 950mAh
Power Consumption Max 620mA @5V
Dimension
38*38*36mm
Net Weight 56g (with battery)
Features:
- High Performance FPV Video Recording.
- Faster Speed from Stretched Video.
- 56 Gram Lightweight.
- The Smallest 4K camera for your FPV Quads.
- Long battery life with 960mAh built-in battery.
- QR Code Setup Parameters.

English Manual, Click Here

Deutsch Manual, Click here

Package Included:
1x Runcam 5 HD FPV Camera
1x Micro-USB Cable
2x Velcr.o
1x Manual


...Continue Reading
Posted by Aussie Pete | Jun 05, 2019 @ 06:23 AM | 721 Views
So many times I have been restricted to sitting in front, at a fixed location , looking into a FPV screen to do my flying , especially take off and landings.
Also there are times when the model has unknowingly flown behind a obstical and signal and video is lost.
So why not have the FPV screen attached to you and easily have line of sight available to you within a second or two.
Also in some flying sites it is not practical to set up a FPV ground station easily.
The best attribute is having line of sight and the fpv screen available in the blink of an eye and it being portable.
Unlike fpv goggles, you have the best of both views of your model without taking off goggles and trying to find where your model id in the sky.


FPV Shoulder video monitor (4 min 0 sec)

Posted by DutchRC | Jun 05, 2019 @ 01:46 AM | 1,423 Views
Halloa people

yes.. another FPV quadcopter.. You could be mistaken to think they are a dime a dozen.. This one IS
different though.. For one: the price isn't Low, but the build-quality definately reflects this..
This one is from the same company as the Esky Eagle airplane...

Link to the quad: DTS GT200 - all round 4S FPV quad

And to kick things off.. Here are my first 2 flights with it

Maiden Flights! DTS GT200 FPV Racing Drone.. Long Flight Time! (15 min 21 sec)


Specifications:
type: multi-purpose leaning towards racing
wheelbase: 200mm True X
base thickness: 5mm
material(s): carbon fiber
flight controller: Omnibus F4 SD
ESC's: 30A 4-in-1 Dshot600
motors: 2206 - 2500 Kv
propellors: 5046 x3 (similar to DAL Cyclone v2)
FPV camera: Runcam Eagle 2 Pro
VTX: 25 - 600 mW
Lipo: 1300 - 1500mah 4S (not included)
OSD: yes - Betaflight
smart Audio: yes
buzzer: yes
LED's: nope
spare props: yes, 1 set
Posted by landru | Jun 05, 2019 @ 12:20 AM | 818 Views
Until recently, a NAN Omega languished on my bench, partially completed. Truth be told, it had migrated off the bench into storage for many moons, a victim of my distraction by other projects and commitments.

Happily, things have changed. The Omega has been completed and flown. It was my first all-composite model. I can share a few pictures, impressions, and a lesson learned the hard way.

Tonight is the beginning. I'll jot down these few thoughts and add some pictures. In the coming days, I'll come back to round out the report. Stay tuned....Continue Reading
Posted by wattechighland | Jun 04, 2019 @ 11:59 PM | 1,119 Views
深度調節用のピストンバラストを駆動するサーボのマウントを製作、設置。
バウ区画もバラストタンク側で分離できるようにするので、後ろ側からサーボを
組み込めるようにした。

バッテリーはバウ区画に入れることにした。上面にハッチを作る予定。
バラストタンクは定規の位置のの100から200の間で作る予定です。
Posted by wattechighland | Jun 04, 2019 @ 11:58 PM | 1,107 Views
スラスターポンプ用と推進用のモーター計3個にグリス封入シール処理を行う。
呂500のスラスターポンプにも施したんですが、まだ1回しか池に行ってないので
これから耐久性を見ていきたい。
前回作ったfrpパイプを加工してスラスターポンプを製作。
ペラはトイドローン用を切り詰めて使用してみる。推力が出るかはまだテストしてません^^
(逆向きにペラを差し込めばよかったかも)
Posted by old4570 | Jun 04, 2019 @ 11:48 PM | 1,299 Views
Really hasn't been a great week , that's for sure . We are right in the middle of a cold / rainy front that has lasted a little too long .
Today was no exception , overcast and a little overly windy .

Still . I had an itch to get the CG tests over and done with + a little trimming !

I had all my control surfaces set to minimum throws ( furthest hole on the control horn )

I was using the Nanotech 460 2s battery .

First Chuck showed me that for such slow gliding I did not have enough elevator , so I went for the shortest hole on the control horn for maximum throw .
This was better . So I tried a very gentle powered glide ( maybe 10% throttle ) and this showed the elevator to be a little touchy now . I gave the elevator some 50% expo and this really smoothed things out .

The CG looks to be about right for me and I have not adjusted anything else ( Ruder / ailerons ) , only the elevator .
The wind did not really help at all . But it looks like the Firstar will fly on minimum power .
I can really see this model crawling along in calm conditions at maybe 20% throttle or possibly less . And there really is enough power to ROG ( Rise off ground ) .. I tried , but the ground was too rough where I was . On a smooth surface , it should not be an issue .

Wow , 3 new models to play with .. Really looking forward to a spell of decent weather .
Posted by 1/2A Nut | Jun 04, 2019 @ 11:46 PM | 899 Views
Intense 1/2A flying moments.

Lil Speedy - Cox TD .049 / 118 MPH / 30,492 RPM (4 min 54 sec)

High thrust to weight ratio with a small span plane aka "freight train"
in any direction regardless of wind.


AmpAbuser aka 1/2A Nut
Published on May 7, 2016
TD .049 /SPI / Throttle Sleeve Ports Allow SPI function / Prop 4.1 x 4.1N / 30% Nitro
Static 24,790 rpm / 7.6oz thrust / .127hp / 94.74w / 96.2 mph / 6.1oz RTF
Unloaded 30,492 best on Vid 1 / 118.4 mph per prop calc.
Doppler reading has it at 118mph per pass at 1:47mins into the vid.
Hard tank no pressure tap. 3.7g servos. Cox low compression plug
3mins 20sec of run time on 15cc tank. 16.5"x4" span wing 66sq. in.


The fastest stock Cox TD .05 RC plane I have flown.

Cox TD .050 RC / NANO III / 4.22 x 5.5 modified APC Prop (4 min 22 sec)
...Continue Reading
Posted by DoubleEagle | Jun 04, 2019 @ 10:34 PM | 758 Views
This is our new 2019 arrival. This building blocks off road remote control CaDA car consists out of 1941pcs and is suitable for kids from 8 years old.
You will find: 2.4ghz radio control, 1 battery for the car, 3 motors, 1 servo, 2 LED lights.
For more remote control toys visit: http://en.doubleeagle.cc/
Business enquires: [email protected]
Building Blocks Off Road Car | Building Blocks Remote Control Toys (CaDA Building Blocks 2019) (1 min 22 sec)

Posted by RushVTX | Jun 04, 2019 @ 09:07 PM | 753 Views
How to request after-sales service from Rush FPV

Please email [email protected] with following information

-Your Name
-Country you are from
-Company name ordered from
-Date of purchasing order
-Purchased product model and quantity
-Issue product picture with written issue explanation / Video issue explanation

Your feedback will be replied within 1-2 days.

Attention: Only email feedback will be answered.

Thank you.
Posted by RC Roundtable | Jun 04, 2019 @ 03:51 PM | 997 Views
Episode 82: "Bootleggers" is now live!
http://rcroundtable.com/podcasts/mp3/RCR_episode_82.mp3

While Fitz and Terry were on vacation, Lee chatted with our buddy, Keith Sparks. They talked about:
-SMALL thoughts (1:48)
-Motion RC has balsa (6:00)
-Sparky and Blackhorse Models (7:55)
-Sparky's workbench (22:16)
-Sparky and Brodak (29:40)
-Lee's workbench (33:20)
-Warbirds at Bomber Field (46:43)

You can visit our website at RCRoundtable.com to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us a line here, our facebook page, or email: [email protected].
Posted by aerosurfer | Jun 04, 2019 @ 01:46 PM | 724 Views
Lithium (4 min 31 sec)

Posted by RCvertt | Jun 04, 2019 @ 01:06 PM | 1,187 Views
Looks like they are going to make the Apollo XI flying field an AMA sanctioned field if it opens again. Please stop calling the airport, AMA and VallyFlyers while they work this out.


If the field is AMA sanctioned, the good part is...
1) We get to fly again.


Not sure if this is bad or not yet...
1) I fly VTOL airplanes. *Not yet sure if this will be allowed at an AMA sanctioned field? This is my main concern.
2) Flying there will no longer be free. You'll have to be an AMA memeber 75$ at least a year. *I'm an AMA member so no problem for me there.
3) Field will have someone there from sun up to sun down to police the field. *Not yet sure if this is a good or bad thing. I'm fine with that as long as I can fly my VTOL airplanes from the main runway. I see a possible issue with aircraft weight. Under a certain weight, 2lbs I think, you have to fly at the north corner of the field that is much smaller. It's to small for me to make a turn with the VTOL convergence in stability mode. This section of the field might also disappear if the field is AMA sanctioned?
Posted by GroundControlRC | Jun 04, 2019 @ 07:25 AM | 889 Views
Tutorial - Volantex Super Cub - Installing Flaperons



Here is a link to the Video:
https://www.youtube.com/watch?v=F_0_ud1xBtk

In this Tutorial we're going to replace the single 9g servo with two 4g servos so we can program Flaperons ;-)
I do not recommend you complete this tutorial until I've completed the field testing.
Get ready!

Here is a link to the Plane:
Upgraded: New batch comes with Integrated flight control with self-stabilization function

Volantex 2.4G 4CH V765-2 765-2 Super Cub 750mm Sport Park Flyer RTF
https://www.banggood.com/Volantex-2_...47791920140372

Here is a link to the 4.4g Servos used in this Tutorial:

Turnigy™ TGY-1440A Analog Servo 20T (V2) 0.8kg / 0.10sec / 4.4g
https://hobbyking.com/en_us/turnigyt...asc=1250722527


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Posted by DoubleEagle | Jun 04, 2019 @ 12:13 AM | 860 Views
Building Blocks Toys STEM Learning and Educational Kit (remote control set).

This building blocks remote control CaDA car (Formula1 racing car) consists out of 1586pcs and is suitable for kids from 8 years old.
You will find: 2.4ghz radio control, 1 battery for the car, 2 motors, 1 servo, LED lights

For more STEM remote control building blocks toys products visit: http://en.doubleeagle.cc/
Business enquires: [email protected]
Building Blocks Remote Control Car | Formula1 Racing Car (CaDA STEM Building Blocks Toys) (1 min 57 sec)

Posted by old4570 | Jun 03, 2019 @ 11:50 PM | 1,341 Views
With a budget 450mAh 2s battery , using rubber bands to hold it in place .

a) The CG is a little rearward . Both Ele and Ailerons were touchy ..
b) Ele was already @ 50% rates as anything higher would cause binding
c) Ailerons were 100%

I added 40% Expo to the elevator and it smoothed things out really nicely .
The Ailerons were set to 60% rates and 40% Expo and ended up being a little soft . ( I might try 70-30 before I maiden )

Glides - Oh does the Ezio glide ? Yes it does . I was actually quite impressed by it's glide qualities .
Even with a bit of a rearward CG once you got a glide angle there was no need for corrections and the Ezio just did it on it's own a little like a FF model .
Whilst the Ezio was a PITA out of the box , it looks like it it will fly just fine ( Looks like from the CG glide tests )

Still dont like the prop , 7A and so little thrust ...
Speaking off 7A ..
Read a lot of complaints about the 6A ESC and when I looked at mine ..
Looks like there has been a upgrade to a 8A ESC with 10A burst ...
Posted by wattechighland | Jun 03, 2019 @ 11:05 PM | 1,156 Views
rudder,dive plane用サーボのマウントを作り取り付け。
バラストタンクとの境から分離できるようにするので、前方から押さえ板をねじ留めしてサーボを 固定する。

thruster pumpは、今回は細いケーシングにする。
12㎜のアルミパイプを型にしてFRPで筒を製作。
内側に接着剤を使用するので、離型剤としてロウは使えないから、厚めのシュリンクチューブで
やってみた。外側もシュリンクチューブで圧着して硬化させた。
で、これがまたなかなか抜けなかったので、使える方法ではないね。
とりあえず、薄くて硬いケーシングの素材までは出来た^^
後日追記
アルミパイプにロウを塗り、シュリンクチューブを被せてからFRPでパイプを作れば、抜きやす いだろう。
次回はそのようにやってみよう。
Posted by turbinefancy | Jun 03, 2019 @ 11:01 PM | 1,113 Views
I have always love the look of BF-109F. Though many favor the desert scheme. I still love this winter scheme for its high contrast against the background where I fly and resistance to “gatoring” from exposure to the sun.

Some pictures to share!...Continue Reading
Posted by QuadifyRC.com | Jun 03, 2019 @ 06:46 PM | 1,261 Views
Full review can be found here:

https://www.quadifyrc.com/reviews/happymodel-sailfly-x-review-best-value-quad-ive-reviewed-in-2019-so-far




Here is my summary and recommendation taken from the article:

The Sailfly-X is a very low cost "toothpick-class" micro brushless quadcopter from Happymodel, the same company that released the popular Snapper7 and Mobula7 micro quadcopters. It is well equipped with propellers, flight battery and even a spare canopy. It is ultralight meaning it can achieve high performance even with small batteries.

The quad is very well balanced component-wise and offers excellent control and power on 2s and outstanding power on 3s. The light weight comes about from the simplified components namely the main board which includes flight controller, 4xescs and a receiver plus an all-in-one vtx-camera. Being lightweight it has excellent durability from my testing so far. A further advantage of the low weight and high thrust is the exceptional flight time - a low cost 2s 300mah battery offered strong performance for 4-5 minutes of flying time.

This is a very easy quad to recommend - it offers breathtaking performance given the size, is extremely durable and offers exceptional flight time. This is even before we consider the price which around $88 at full retail which is remarkable and worth buying just for components to use on you own build (components which are not often discounted at time of review...). One of the sacrifices made to
...Continue Reading
Posted by DismayingObservation | Jun 03, 2019 @ 06:03 PM | 1,407 Views
Reviewed ten years ago.

A faithful, fun model afterwards despite a hard landing.

And...it's back!

My Wings Maker Wingman II, reviewed here in 2009 and again in 2011 as a test bed for a new GWS servo has been sitting for far too long.

It's now back. The fuselage and wing were replaced after a hard landing (the parts were too cheap to justify fixing the old ones), it was flown a few times after that and was relegated to a garage shelf.

I'd swapped in a Thunder Tiger .40 at some point, but it needed work, not to mention parts. The needle valve had an o-ring reduced to goo and the retaining ratchet broke. In went the original Thunder Tiger once I freed up the crank and carb.

Except for a new prop for safety's sake, a new fuel tank, new lines and guidance now provided by a Hitec Flash 8 radio, it's the same as when I parked it. I also have to thank a member of the club for giving me a new glow plug! I flooded the engine while filling it and I lost the gasket when I went to empty it with the starter. Darn thing went flying off, never to be seen again. I thought it had come off with the plug which was already in the engine.

The opaque black plastic canopy had long ago warped in the sun and was replaced by an off-the-shelf clear canopy. That meant I had to install a pilot bust. I don't like ghost ships. An Ace R/C Cap'n Eddy from a crashed Thunder Tiger park flyer was not only a perfect fit, he just seemed right in a model powered by a Thunder Tiger...Continue Reading