Been Slow Building More Into Car Restoration Now A Days! 
Comments (0)
Add Comment
CMP Aero L-39 Albatros 90mm EDF Jet From (scaleflying.com)
Well I Pulled The Tigger On The New CMP 90MM Aero L-39 Albatros Today, So This Will Be My Next Build Coming
http://www.scaleflying.com/Aero-L-39...cts_c_289.html
Specifications:
Wingspan: 1200mm
Length: 1323mm
Weight: 2700-2800g
Wing Area: 29.2dm/2
Wing Loading: 92.5-96dm/2
Radio System: 4-6 Ch., 6-8 Servos
ESC: 70-80A
Flaps
Duct Fan System: 90mm Duct Fan
Here's a little info on the L-39 i would love to get one in (The Patriots Jet Team) which is a (6 L-39s) display teams that is based here in Northern California and proforms with the Blue Angels doing Fleet Week in San Francisco each year.
As a matter of a fact i think i have a video that i recored last year or the year before
The Aero L-39 Albatros is a high-performance jet trainer aircraft developed in Czechoslovakia during the 1960s. The Albatros, as the most widely used jet trainer in the world, is versatile in light-attack missions as well as in basic and advanced pilot training.
History
The Aero L-39 Albatros is a high-performance jet trainer aircraft developed in Czechoslovakia to meet requirements for a "C-39" (C for cvičný – trainer) during the 1960s to replace the L-29 Delfín. It was the first of the second-generation jet trainers, and the first turbofan-powered trainer produced, and was later updated as the L-59 Super Albatros and as the L-139 (prototype L-39 with engine Garrett TFE731). The...Continue Reading
Well I Pulled The Tigger On The New CMP 90MM Aero L-39 Albatros Today, So This Will Be My Next Build Coming
http://www.scaleflying.com/Aero-L-39...cts_c_289.html
Specifications:
Wingspan: 1200mm
Length: 1323mm
Weight: 2700-2800g
Wing Area: 29.2dm/2
Wing Loading: 92.5-96dm/2
Radio System: 4-6 Ch., 6-8 Servos
ESC: 70-80A
Flaps
Duct Fan System: 90mm Duct Fan
Here's a little info on the L-39 i would love to get one in (The Patriots Jet Team) which is a (6 L-39s) display teams that is based here in Northern California and proforms with the Blue Angels doing Fleet Week in San Francisco each year.
As a matter of a fact i think i have a video that i recored last year or the year before
The Aero L-39 Albatros is a high-performance jet trainer aircraft developed in Czechoslovakia during the 1960s. The Albatros, as the most widely used jet trainer in the world, is versatile in light-attack missions as well as in basic and advanced pilot training.
History
The Aero L-39 Albatros is a high-performance jet trainer aircraft developed in Czechoslovakia to meet requirements for a "C-39" (C for cvičný – trainer) during the 1960s to replace the L-29 Delfín. It was the first of the second-generation jet trainers, and the first turbofan-powered trainer produced, and was later updated as the L-59 Super Albatros and as the L-139 (prototype L-39 with engine Garrett TFE731). The...Continue Reading
The G500 maiden flight from this morning 
It's a glider once i got up in the air i throttle down to half throttle the whole flight.
16.1 lbs
4200 watts
C of G flown today was 7 inches from the leading edge with landing gear retracted up into fuse and wings.
Scrap a wing on the landing and tweeked the nose gear a little
Other than that she's still in one peice
It's a glider once i got up in the air i throttle down to half throttle the whole flight.
16.1 lbs
4200 watts
C of G flown today was 7 inches from the leading edge with landing gear retracted up into fuse and wings.
Scrap a wing on the landing and tweeked the nose gear a little
Other than that she's still in one peice
| HK ProDesign Gulfstream G500 Twin 90mm Fiberglass EDF Jet ( The Maiden Flight ) (6 min 17 sec) |
Making this my first build for 2012 season.
Jet Teng Models HPAT 90mm - 100mm Viper Jet
SPECIFICATIONS:
■EDF Size: 90mm or Jetcat P20 Turbine
■Scale: 1/9
■Wing Span: 1410mm (55.5'')
■Length: 1280mm (50.5'')
■Estimated flying weight: 8 lbs
■Recommended Power: 8-10S Li-Po System and Motor
The kit comes well packed from the factory seems they still have the same packing system in place as they did when i recieved the "JTM BAe Hawk & L-39" about a year and a half ago back so nothing shifts around in transit.
This kits are really well made, all the little nick nacks are already done for you.
Decals, cockpit hatch, one thing i could recommend is to give a (gear doors & landing gear) installed option before shipped now that would be neat.
Here's a few pictures.
Jet Teng Models HPAT 90mm - 100mm Viper Jet
SPECIFICATIONS:
■EDF Size: 90mm or Jetcat P20 Turbine
■Scale: 1/9
■Wing Span: 1410mm (55.5'')
■Length: 1280mm (50.5'')
■Estimated flying weight: 8 lbs
■Recommended Power: 8-10S Li-Po System and Motor
The kit comes well packed from the factory seems they still have the same packing system in place as they did when i recieved the "JTM BAe Hawk & L-39" about a year and a half ago back so nothing shifts around in transit.
This kits are really well made, all the little nick nacks are already done for you.
Decals, cockpit hatch, one thing i could recommend is to give a (gear doors & landing gear) installed option before shipped now that would be neat.
Here's a few pictures.
