Posted by TinkleWid | Today @ 05:08 AM | 39 Views
Amazing SD Raw Footage 😲😲 (Apologies for the swearing)
Test of light handling, colour range and bitrate with the Caddx after sunset.

Caddx Ratel 🐼 Modified vs Stock FPV Footage - Caddx Tarsier not required, cheap Topsky DVR is!! (2 min 33 sec)

I think the Caddx Ratel coupled with a Turtle (if you already have one) may beat buying a new Tarsier. No HD footage for a change but the image captured from the goggles is good enough in low light.

This was my first day flying with the Ratel Starlight camera and I got stuck in a tree with my first lipo. After 5 hours I managed to get it back with some rope and a stick but I just about found the energy to fly a couple of lipos after sunset and before total darkness. Great to have a dedicated FPV Camera especially as I've been flying a lot with the Caddx Turtle lately. it makes such a difference to be able to see in low light and have no latency issues!

Personally , I feel the stock footage is great for visibility in the shadows and makes the early evening feel like daytime; great for Golden Hour flights. Amazingly the footage from my old TopSky Prime 1S Goggles is really good and better than the image produced by my trusty VRD2-Pro Goggles (Topsky sent me a new board to rectify the receiver issue).

Set-Up and Gear:

Flying the Kwad Karl (Bando Racer 3) BR3 Frame -

Caddx Ratel Starlight Camera Reading
Posted by Tazkiller85 | Today @ 05:03 AM | 40 Views
Yep Les Amis,
Dans la famille Wizard, je demande ... Le petit fils du X220 ! lol . Voici aujourd'hui le test sur le Eachine Wizard X140HV . Une "Torpillette" en 3 pouces qui accepte les batteries 6S !!! J'ai commencé avec une 4S par sécurité, j'était satisfais mais pas du tout impressionné .. Par contre, quand j'ai branché une 6S, là, j'ai été un peu surpris, excité et effrayé ! mdr ... C'était pour moi la première fois que je testais un si petit engin avec autant de " Patate " ! La conception est bonne, les éléments utilisés sont très corrects pour son prix mais par contre, je ne donne pas cher de ses bras en cas de chocs un peu rudes ! Je trouve que le carbone n'est pas de très bonne facture, donc s'il y aura un truc à changer sur cette bombinette volante, ce sera ça . Bon Film à Tous ...

Eachine Wizard X140HV un 3 pouces en 6S - Review Test Démo - ça Couine ! (30 min 41 sec)

NOTATAZ : 17/20 "Lourdeau" mes Propre !

Niveau : Débutants et Confirmés
Les + : Puissant et souple, Réactif, bonne autonomie (conso faible ), Stable, Bonne qualité d'image .
Les - : Carbone un peu faiblard (fragile aux chocs ) ...

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- Wizard X140HV :
- Pièces de rechange X140HV :
- Batterie 6S 550mAh (adaptateur ci-dessous) :
- Adaptateur XT60 vers...Continue Reading
Posted by Tazkiller85 | Today @ 04:27 AM | 79 Views
Voici les Nouveaux et anciens coupons et Promos Banggood à jour et classés ! Il y a des Top nouveautés .. mais je vous laisse chercher lol


- JJRC X6 Aircus 5G WIFI FPV ( COUPON 0d7c3c ) 162.46€ 30% OFF jusqu'au 31/5/2019 :
- MJX Bugs 2 SE RTF ( COUPON BGB2SE ) 128,49€ 15% OFF jusqu'au 10/06/2019 :
- MJX Bugs 3 RTF ( COUPON b0db8f ) 54.50€ OFF jusqu'au 31/5/2019 :
- New UP Air One 5.8G FPV 4K RTF ( COUPON f84426 ) 249,81€ 60$ OFF jusqu'au 31/5/2019:
- MJX X103W 5G WIFI 2K Camera RTF (coupon fab031 ) 88,39€ 20% OFF jusqu'au 31/05/2019 :
- Eachine E32HW WIFI (coupon 3522ef ) 29,26€ 35% OFF jusqu'au 31/05/2019 :
- JJPRO X5 5G WIFI FPV (coupon ad65c6 ) 114.86€ 30% OFF jusqu'au 31/7/2019 :
- JJRC X11 5G WIFI FPV (coupon abf70b ) 139.11€ 18% OFF jusqu'au 31/7/2019 :
- AOSENMA CG035 WIFI FPV (coupon 51a768 ) 118,42€ 40% OFF jusqu'au 31/7/2019 :
- AOSENMA CG035 5.8G FPV (coupon 51a768) 82,89€ 40% OFF jusqu'au 31/7/2019 :

- DJI Tello Drone ( COUPON 9fc108) 81.95€ 30% Off jusqu'au 31/05/2019 :
- DJI Mavic Pro Platinum ( COUPON 381585 ) 803.07€ 25% jusqu'au 31/05/2019 :
- DJI Mavic 2 Pro/Zoom ( COUPON...Continue Reading
Posted by DoubleEagle | Yesterday @ 10:22 PM | 575 Views
Remote Control Toy Tractor (1:16) with a wide range of accessories: dumper, sprinkler and windrower!!! Remote Control Toy Tractor For Kids and RC Hobbyists!!!

Item No.: E351-003
Model Name: 1:16 Remote Control Toy Tractor
Simulated lights/sounds (mute button)
RC distance: 25meters
Speed: 2.16km/h
Tractor rechargeable battery and charger included
Radio control:dumper, windrower, and sprinkler
Double Eagle (China) Ltd. is a professional toy manufacturer, with over 30 years of history, specialising on the manufacture of RC and functional toys. We have a wide range of remote control toys for kids and for rc hobbyists too.

For more remote control toys products visit:
Business enquires: [email protected]
Remote Control Toy Tractor! Remote Control Toys For Kids! (1 min 23 sec)

Posted by falcan | Yesterday @ 08:31 PM | 640 Views
Hi looking for the plans for the phoenix pc 9 wings 40 size please for repairs
[email][email protected][/email
Posted by Chishp | Yesterday @ 07:24 PM | 669 Views
Hi Guys

Currently trying to understand the RC Electronics T3000 drop out issues: I am interested in other flyers experiments with the Ariels both air borne and the one on the T3000 base station: what changes have you done why? and what improvements have you found? It appears to be a good system let down but Ariel related issues? or am I wrong?
Posted by frank4wing | Yesterday @ 04:40 PM | 722 Views
The Caddx Ratel FPV cam has amazing low light abilities. The 3" quad in this video has a cheap LED flashlight on top and weighs 170g including a 3s 450mAh battery.

Caddx Ratel Night Test (4 min 34 sec)

Posted by Rogosi | Yesterday @ 12:01 PM | 1,082 Views
I came across these earlier this year at the AMA Expo East. They are made by the following company,, run by Dennis Andreas. I grabbed a couple to bring back home to fool around with. A few weeks later I took them an indoor free flight event I was co-CD'ing and they were a big hit. I gave some to kids who came through, and a few to other modelers. They really do glide very nicely indoors, an easy 30-40 feet nice and level.

They come in foam sheets very similar to depron, but a little more flexible. The sheet is a about 11 by 14 and has 5 pieces laser cut into it. The pieces pop out and go together very easily. I've used Foam Tac and tape to put them together. I'm going to experiment with making them a bit lighter, not that it really needs it. Also, I think I'll make a notch to let these be launched with a rubber band/catapult.

I ended up buying 100 of these they were so much fun. We'll save some for give aways at events, perhaps for some classroom/Cub Scout demonstrations as well. They would be a great little fundraiser too at events for clubs, they are less than $2.00 and could easily be sold for $3-5 bucks. Id' rather have this than the small balsa planes that break almost immediately.

We had some fun painting a few up with some old paint and stickers we had laying around. We'll use these as our display models at events.

Once built, the plane is about 13.5 inches long, and has a 10 inch wingspan.

Dennis can be reached here. I have an order in for some more of these which I believe he makes to order. Shipping is pretty reasonable too depending on how many you buy.

*I paid for these items, I'm not affiliated with the company in any way other than buying from them and enjoying their products.
Posted by FPV Sam | Yesterday @ 11:49 AM | 1,066 Views
Non OSD Video -
AR Wing- Third Attempt at Longrang FPV (5 min 14 sec)

OSD Video -
AR Wing- 3km Longrang FPV- UNCUT / OSD (5 min 14 sec)
...Continue Reading
Posted by okhreiche | Yesterday @ 11:21 AM | 1,073 Views
Hello all,
first I am so happy I found you guys because I am sure I will need your experience.
I am very new at this, just starting.
I got a super cub S and I tried it once and guess what I crashed, so I fixed it and spoke to some of my friends who's suggesting me to get a simulator and learn on it.
can anyone please advise me if it would be good to get a SIM and witch one for a beginner like me. Any suggestions?

thank you in advance
Posted by Rogosi | Yesterday @ 11:11 AM | 1,096 Views
This is my own personal blog with my own personal commentary. I am not writing in an official AMA capacity. Any official AMA comments can be found here:
Posted by DutchRC | Yesterday @ 09:41 AM | 1,165 Views
Halloa people

so yes.. We FINALLY have a new action camera from Foxeer.. The Box 1 was discontinued quite a while back..
Anybody know Why???
The new one is here now though, so let's not complain

Link to the cam: Foxeer Box 2 - 4K action camera

So in this topic I'll be posting my findings on the new camera!

Let's actually start with some complaining anyway! :P

Foxeer Box 2 - 4K Action camera! - Anti Shake EIS?? :O (10 min 48 sec)

Posted by old4570 | Yesterday @ 09:17 AM | 1,183 Views
I ordered some F949 flight control boards some time ago .
Finally got around to trying one .

The board offers 4 channels , Thr - Rud - Ail - Ele
To use the 3rd servo , one simply plugs in a micro servo into the spare 3 pin slot . ( Sorry , which plug ? ) ( Measures 4.8mm x 2.5mm )
Anyways , 4ch capability .

Protocol = the old Flysky protocol used by the 9x and other transmitters .
Only fly in the ointment is the need to rebind the Tx to the flight board every time you want to use it .
This is probably because of the Factory Tx , which sends out a bind signal on start up .

Still , a very interesting board for RC projects that might need 4 channels . Especially Micro Models maybe around 500mm span .
The old V911 boards are just about gone , or simply premium priced . A F949 board just might be what the project ordered .

F949 control board (0 min 27 sec)

Posted by phil alvirez | Yesterday @ 05:56 AM | 1,304 Views
there are 2 choices:
1-if it doesnt break, dont touch it.
2- better try to make it so does not break!
which 1 you choose?
the truth is, both have valued points.
and we do 1 or the other all the time
lets consider 1 situation:
you have been flying certain plane without making any change or 'improvement' and it has been doing just fine...
or another: something has happened to you and you want to take measures to prevent it to happen again (or some say that this or that failed to them so you better do something to prevent it to happen to you).
so, what will you do?
i have some planes that have been flying without fault and keep them as they are.
on the other hand, i have had some failures with a plane and try to prevent that to happen again by doing whatever i can.
isnt this confusing? why 1 with 1, and another with another?
what do you do?
are we a puzzle or what?
or is this a matter of probabilities and risk factor?
Posted by GBLynden | May 23, 2019 @ 11:40 PM | 1,491 Views
This my first official night flight caught on camera with my E-flite Night Radian RC Glider.

It has Flite Test stickers on it and is a FT 2M Powered Sailplane.

E-flite Night Radian RC Glider - FT 2M Powered Sailplane Night Flight (4 min 55 sec)

Posted by DoubleEagle | May 23, 2019 @ 10:20 PM | 1,533 Views
Fantastic Remote Control Bluetooth Speaker Truck!!! A great gift for your kid.
Control the bluetooth speaker truck with a remote controller - lot's of fun is quaranteed for your kid!
Item Number: E669-003
Product size: 33.5*11.5*16.5cm
2.4GHz control - bluetooth speaker, simulated sounds, stage lights, stage rotation

Double Eagle (China) Ltd. is a professional toy manufacturer, with over 30 years of history, specialising on the manufacture of RC and functional toys.

For business enquires: [email protected]
Bluetooth Speaker Truck!!! (0 min 57 sec)

Posted by Reckless_fpv | May 23, 2019 @ 09:39 PM | 1,562 Views
barn bando and one pack wonder at new spot (4 min 59 sec)

Nothing too crazy 🤪
Posted by VicT | May 23, 2019 @ 05:56 PM | 1,658 Views
I purchased a spare cowl and made a ply firewall to fit a 55 mm O.D. Aluminum Turbo Spinner. A yoke and collet matches it and holds 10x6 folding blades. A bungee ensures positive blade retraction. Extension is symmetrical avoiding start up imbalance loads. Heat damage from the sun warped the black painted plastic and it was removed and replaced with clear .012 inch thick plastic from a pastry container. Canopy glue was used to glue the clear to the white plastic and for screening over the turbine duct openings.

Dive performance with power off is increased due to reduction in prop drag. With a 4S 1500 100C pack amp draw is only 33 amps with 470 Watts of power. On a 20 second full power climb at 80 degrees (SAFE selected On) she climbed to an estimated 1000 ft and after trimming for a 200 ft left hand circle stayed at altitude for 10 minutes power off!

An ISDT BC 8-S shows battery remaining in percentage and in voltage. It can be viewed while running up the motor while straddling the fuselage from behind the prop.