Posted by Lukelundy | Today @ 09:45 PM | 237 Views
I recently crashed my plane into a tree and it was still working (stuck in the tree) I retrieved it the following day (today) and I can’t get it to power up, I assumed the battery died and charged it for the 30 minutes until the charger showed no red led, then I plugged in the battery to the plane and it will not power up whatsoever, I’ve checked the main wires as far I can tell they all seem to be in order any help would be greatly appreciated
Posted by Bill M - RC | Today @ 06:15 PM | 518 Views
Hi fellow rc pilots & rc enthusiasts

MJX X104G review. This MJX X104G 5G WIFI FPV With 1080P Camera, GPS, Follow Me Mode. Point of Interest, Waypoint navigation RC Quadcopter drone RTF review includes unboxing, inspection, setup, app, flight, duration, range, fpv & camera tests.

You can get this MJX X104G 5G WIFI FPV With 1080P Camera, GPS, Follow Me Mode. Point of Interest, Waypoint navigation RC Quadcopter drone RTF here now: http://bit.ly/30GnTkI


MJX X104G review - GPS 5G Wifi FPV Quadcopter drone (35 min 55 sec)

Posted by Ben Petree | Today @ 03:00 PM | 618 Views
I recently bought a 13x6 two blade prop for my eflite turbo timber 1.5m, and am curious what others who've done this conversion are using for spinners? I'm not sure what will fit the longer collet on this plane.
Posted by GroundControlRC | Today @ 09:54 AM | 742 Views
DustOff #6 - XK A600 DHC-2 Beaver Bush Plane in a 3-4mph Wind ;-)



Here is a link to the Video:
https://www.youtube.com/watch?v=haFv5jcWsUk

Let's blow the dust off this plane ;-)
It has a lot of lift so flying in some wind can be fun ;-)

Here are links to this plane and spare batteries:

Link to this Plane:

XK DHC-2 DHC2 A600 5CH 3D6G System Brushless RC Airplane Compatible Futaba RTF
https://www.banggood.com/XK-A600-4CH...47791920140372

Spare Batteries:

XK DHC-2 A600 RC Airplane Spare Parts 7.4V 300mAh 25C Li-po Battery
https://www.banggood.com/XK-DHC-2-A6...47791920140372

Turnigy nano-tech 300mAh 2S 35~70C Lipo
https://hobbyking.com/en_us/turnigy-...asc=5382684821


See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

See Us On Youtube | Patreon | RCGroups | Facebook

https://www.youtube.com/c/GroundControlRC
https://www.patreon.com/groundcontrolrc
https://www.rcgroups.com/forums/member.php?u=754189
https://www.facebook.com/pg/Ground-C...3132721/posts/
Posted by XBStation | Today @ 08:33 AM | 697 Views
Happy Weeokend! We hope your week starts out well.
We did a short Flight WITHOUT RC Transmitter and Datalink, only use 4G LTE to control our Fixed Wing.
And the result are very good, feels like we were a bird .
Link video:
5.7 km Fixed Wing Flight With Joystick via 4G LTE (4 min 56 sec)

Posted by TMacFPV | Today @ 08:26 AM | 778 Views
A few videos ago, we asked the question which frame should we use to build our 3-Inch Micro FPV Quadcopter, the FlexRC Ascent 3 HD or the HGLRC Arrow 3 Hybrid. At that time "The People's Choice" was the FlexRC Ascent 3 HD and it has turned out to be my favorite flyer-Thank You!

Now, we build out the other 3 inch drone frame, the HGLRC Arrow 3 Hybrid. Why is it a “hybrid?” The front arms are a stretched-X type (narrower) and the rear arms are a “normal-X” type (standard). Theoretically, this "hybrid configuration" should create more stability on the pitch axis and enable smoother and tighter cornering around turns (like on rails!). FPV FlightClub has used this hybrid configuration in their latest racing frames the 5" Proton-R and Neutron-R. One of the (if not, THE) best FPV Race Pilots in the world, Captainvanover, is running this hybrid setup starting this race season!

We complete our Hybrid 3 Inch Drone Build with our own custom components (not the ones which come with the BNF version of this HGLRC Arrow 3 Quad). In the video, we show a complete list of the components we use along with each of their weights, the overall dry weight of the build and the All-Up Weight along with the Thrust-to-Weight Ratio of this build in comparison with that of the FlexRC Ascent 3 HD. Guess which one wins that contest! What do you think of this Hybrid configuration? Also, the 2nd of 3 “Keywords” is revealed to unlock the Mystery of our upcoming announcement. Take a Guess for your chance to Win!
3 INCH DRONE BUILD (7 min 21 sec)

Posted by santanig5 | Today @ 07:06 AM | 813 Views
Wingspan 1042mm / 41.0in
Overall Length 1226mm / 48.3in
Flying Weight Around 2500g
Motor Size 3270-KV1930 inner running
ESC 100A with 8A BEC
Servo 13g Analog Metal Gear Servo* 8pcs
Radio 6 Channel
CG (center of gravity) 90-100 mm
Recommended Battery 6S 4000mAh 35C
Flaps Yes
Retracts Yes
Approx. Flying Duration 4-5 Minutes




FMS 80mm Bae Hawk Maiden Flight (3 min 48 sec)

Posted by TinkleWid | Today @ 05:08 AM | 873 Views
Amazing SD Raw Footage 😲😲 (Apologies for the swearing)
Test of light handling, colour range and bitrate with the Caddx after sunset.

Caddx Ratel 🐼 Modified vs Stock FPV Footage - Caddx Tarsier not required, cheap Topsky DVR is!! (2 min 33 sec)


I think the Caddx Ratel coupled with a Turtle (if you already have one) may beat buying a new Tarsier. No HD footage for a change but the image captured from the goggles is good enough in low light.

This was my first day flying with the Ratel Starlight camera and I got stuck in a tree with my first lipo. After 5 hours I managed to get it back with some rope and a stick but I just about found the energy to fly a couple of lipos after sunset and before total darkness. Great to have a dedicated FPV Camera especially as I've been flying a lot with the Caddx Turtle lately. it makes such a difference to be able to see in low light and have no latency issues!

Personally , I feel the stock footage is great for visibility in the shadows and makes the early evening feel like daytime; great for Golden Hour flights. Amazingly the footage from my old TopSky Prime 1S Goggles is really good and better than the image produced by my trusty VRD2-Pro Goggles (Topsky sent me a new board to rectify the receiver issue).


Set-Up and Gear:

Flying the Kwad Karl (Bando Racer 3) BR3 Frame - https://www.armattanproductions.com/...duct_grid/2209

Caddx Ratel Starlight Camera
https://www.banggood.com/...Continue Reading
Posted by Tazkiller85 | Today @ 05:03 AM | 864 Views
Yep Les Amis,
Dans la famille Wizard, je demande ... Le petit fils du X220 ! lol . Voici aujourd'hui le test sur le Eachine Wizard X140HV . Une "Torpillette" en 3 pouces qui accepte les batteries 6S !!! J'ai commencé avec une 4S par sécurité, j'était satisfais mais pas du tout impressionné .. Par contre, quand j'ai branché une 6S, là, j'ai été un peu surpris, excité et effrayé ! mdr ... C'était pour moi la première fois que je testais un si petit engin avec autant de " Patate " ! La conception est bonne, les éléments utilisés sont très corrects pour son prix mais par contre, je ne donne pas cher de ses bras en cas de chocs un peu rudes ! Je trouve que le carbone n'est pas de très bonne facture, donc s'il y aura un truc à changer sur cette bombinette volante, ce sera ça . Bon Film à Tous ...

Eachine Wizard X140HV un 3 pouces en 6S - Review Test Démo - ça Couine ! (30 min 41 sec)


NOTATAZ : 17/20 "Lourdeau" mes Propre !

Niveau : Débutants et Confirmés
Les + : Puissant et souple, Réactif, bonne autonomie (conso faible ), Stable, Bonne qualité d'image .
Les - : Carbone un peu faiblard (fragile aux chocs ) ...

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :

- Wizard X140HV : http://bit.ly/2LpOEpR
- Pièces de rechange X140HV : http://bit.ly/2HS4wwy
- Batterie 6S 550mAh (adaptateur ci-dessous) : http://bit.ly/2X8lGwq
- Adaptateur XT60 vers...Continue Reading
Posted by Tazkiller85 | Today @ 04:27 AM | 914 Views
Voici les Nouveaux et anciens coupons et Promos Banggood à jour et classés ! Il y a des Top nouveautés .. mais je vous laisse chercher lol

DRONES LOISIR

- JJRC X6 Aircus 5G WIFI FPV ( COUPON 0d7c3c ) 162.46€ 30% OFF jusqu'au 31/5/2019 : http://bit.ly/2WWoDjk
- MJX Bugs 2 SE RTF ( COUPON BGB2SE ) 128,49€ 15% OFF jusqu'au 10/06/2019 : http://bit.ly/2JteqI7
- MJX Bugs 3 RTF ( COUPON b0db8f ) 54.50€ OFF jusqu'au 31/5/2019 : http://bit.ly/2Q09KKh
- New UP Air One 5.8G FPV 4K RTF ( COUPON f84426 ) 249,81€ 60$ OFF jusqu'au 31/5/2019: http://bit.ly/2GaK7mR
- MJX X103W 5G WIFI 2K Camera RTF (coupon fab031 ) 88,39€ 20% OFF jusqu'au 31/05/2019 : http://bit.ly/2JS9JXC
- Eachine E32HW WIFI (coupon 3522ef ) 29,26€ 35% OFF jusqu'au 31/05/2019 : http://bit.ly/2Hrc4qZ
- JJPRO X5 5G WIFI FPV (coupon ad65c6 ) 114.86€ 30% OFF jusqu'au 31/7/2019 : http://bit.ly/30FNLNM
- JJRC X11 5G WIFI FPV (coupon abf70b ) 139.11€ 18% OFF jusqu'au 31/7/2019 : http://bit.ly/2QaTCFY
- AOSENMA CG035 WIFI FPV (coupon 51a768 ) 118,42€ 40% OFF jusqu'au 31/7/2019 : http://bit.ly/2W9jgQQ
- AOSENMA CG035 5.8G FPV (coupon 51a768) 82,89€ 40% OFF jusqu'au 31/7/2019 : http://bit.ly/2VBK9Z6

- DJI Tello Drone ( COUPON 9fc108) 81.95€ 30% Off jusqu'au 31/05/2019 : http://bit.ly/2WUAPBj
- DJI Mavic Pro Platinum ( COUPON 381585 ) 803.07€ 25% jusqu'au 31/05/2019 : http://bit.ly/2YxveRI
- DJI Mavic 2 Pro/Zoom ( COUPON...Continue Reading
Posted by DoubleEagle | Yesterday @ 10:22 PM | 1,398 Views
Remote Control Toy Tractor (1:16) with a wide range of accessories: dumper, sprinkler and windrower!!! Remote Control Toy Tractor For Kids and RC Hobbyists!!!

Item No.: E351-003
Model Name: 1:16 Remote Control Toy Tractor
2.4GHz
Simulated lights/sounds (mute button)
RC distance: 25meters
Speed: 2.16km/h
Tractor rechargeable battery and charger included
Radio control:dumper, windrower, and sprinkler
Double Eagle (China) Ltd. is a professional toy manufacturer, with over 30 years of history, specialising on the manufacture of RC and functional toys. We have a wide range of remote control toys for kids and for rc hobbyists too.

For more remote control toys products visit: http://en.doubleeagle.cc/
Business enquires: [email protected]
Remote Control Toy Tractor! Remote Control Toys For Kids! (1 min 23 sec)

Posted by falcan | Yesterday @ 08:31 PM | 1,464 Views
Hi looking for the plans for the phoenix pc 9 wings 40 size please for repairs
[email][email protected][/email
Posted by Chishp | Yesterday @ 07:24 PM | 1,491 Views
Hi Guys

Currently trying to understand the RC Electronics T3000 drop out issues: I am interested in other flyers experiments with the Ariels both air borne and the one on the T3000 base station: what changes have you done why? and what improvements have you found? It appears to be a good system let down but Ariel related issues? or am I wrong?
regards
Chishp
Posted by frank4wing | Yesterday @ 04:40 PM | 1,544 Views
The Caddx Ratel FPV cam has amazing low light abilities. The 3" quad in this video has a cheap LED flashlight on top and weighs 170g including a 3s 450mAh battery.

Caddx Ratel Night Test (4 min 34 sec)


-
Posted by Rogosi | Yesterday @ 12:01 PM | 1,918 Views
I came across these earlier this year at the AMA Expo East. They are made by the following company, E-aeromotive.com, run by Dennis Andreas. I grabbed a couple to bring back home to fool around with. A few weeks later I took them an indoor free flight event I was co-CD'ing and they were a big hit. I gave some to kids who came through, and a few to other modelers. They really do glide very nicely indoors, an easy 30-40 feet nice and level.

They come in foam sheets very similar to depron, but a little more flexible. The sheet is a about 11 by 14 and has 5 pieces laser cut into it. The pieces pop out and go together very easily. I've used Foam Tac and tape to put them together. I'm going to experiment with making them a bit lighter, not that it really needs it. Also, I think I'll make a notch to let these be launched with a rubber band/catapult.

I ended up buying 100 of these they were so much fun. We'll save some for give aways at events, perhaps for some classroom/Cub Scout demonstrations as well. They would be a great little fundraiser too at events for clubs, they are less than $2.00 and could easily be sold for $3-5 bucks. Id' rather have this than the small balsa planes that break almost immediately.

We had some fun painting a few up with some old paint and stickers we had laying around. We'll use these as our display models at events.


Once built, the plane is about 13.5 inches long, and has a 10 inch wingspan.

Dennis can be reached here. I have an order in for some more of these which I believe he makes to order. Shipping is pretty reasonable too depending on how many you buy.

http://e-aeromotive.com/STEM.html


*I paid for these items, I'm not affiliated with the company in any way other than buying from them and enjoying their products.
Posted by FPV Sam | Yesterday @ 11:49 AM | 1,888 Views
Non OSD Video -
AR Wing- Third Attempt at Longrang FPV (5 min 14 sec)

OSD Video -
AR Wing- 3km Longrang FPV- UNCUT / OSD (5 min 14 sec)
...Continue Reading
Posted by okhreiche | Yesterday @ 11:21 AM | 1,899 Views
Hello all,
first I am so happy I found you guys because I am sure I will need your experience.
I am very new at this, just starting.
I got a super cub S and I tried it once and guess what I crashed, so I fixed it and spoke to some of my friends who's suggesting me to get a simulator and learn on it.
can anyone please advise me if it would be good to get a SIM and witch one for a beginner like me. Any suggestions?

thank you in advance