Metallicgraph's blog View Details
Posted by Metallicgraph | Aug 06, 2018 @ 04:33 PM | 6,743 Views
Fatshark 18650 case modded with a Pololu 9v step up regulator. No more low voltage beeping 15 min into flight from the goggles.
Posted by Metallicgraph | Dec 14, 2016 @ 08:25 PM | 8,439 Views
RMRC 700 tvl cam
Mobius wide angle both on pan servo
10x6 prop
1200kv motor (Ritewing Zeph 2 power package motor I had laying around)
4s 15300mah

Hate hand launching big planes because i have a horrible track record with it, lol. So I slightly modified an anaconda landing gear to put on the skyhunter.
Posted by murrelljimmy | Nov 11, 2015 @ 10:42 PM | 9,057 Views
Newest addition, a Snipe Air Industries Caliber. Keeping this one basic, at least for now.
Sunnysky 2212 1400KV Motor
Velotech 40 amp ESC
Graupner 9x5 prop
3s 2600mah 35c nano tech battery
Emax 12g Metal Gear Servos
5.8 Immersion 600mw VTx
RMRC-600XV 600TVL Cam
Immersion 8 channel diversity Rx (already had an extra one on hand)
VAS Dipole antenna
Mobius C lens.
Caliber crusing (5 min 3 sec)

Posted by murrelljimmy | Dec 15, 2014 @ 12:51 AM | 10,422 Views
Newest build
ZMR250 frame
Simple PDB
Multi Rotor Mania 12a SimonK ESC's
T-Motor 2204 2300kv
HQ 5x4 props
RMRC 1300mah 3s
EzUHF 8 channel lite Rx
Naze32 full
Sony Super HAD CCD 600TVL Camera
Immersion 600mw VTx
Immersion SpiroNET
Mobius Wide
Just added a Bluetooth adapter for easy access to PID's on the phone
Posted by murrelljimmy | Jul 10, 2014 @ 06:59 PM | 11,272 Views
I figured after the FPV airplanes and Tricopter the next place to go was the ground.
Posted by murrelljimmy | Mar 09, 2014 @ 04:36 PM | 11,006 Views
Standard Ritewing power package, 10x5 APC prop, 2x 4s 3300mah. Replaced the fiberglass spars with square .250 carbon top and bottom plus one 14mm x 300mm spar running in the middle. RVOSD , GoPro 3 silver full case RMRC 700 pro flight cam, EZUHF diversity. RMRC 1000mw 1.3Ghz Vtx. All wiring shielded and grounded.
Posted by Metallicgraph | Jan 24, 2013 @ 12:04 PM | 11,038 Views
My X8 in progress