Posted by prachar223 | Yesterday @ 10:15 PM | 528 Views
Hello all,
I wanted to share a video of the maiden flights on the Imperial Knight Twister built and flown by William C. Nichols of Grove City, Ohio. The Knight twister biplane has a special part of history for Ohio. Don Fairbank's was from Cincinnati, Ohio and the full scale version of this plane is on display at Sporty's Pilot Shop located in Batavia , Ohio. Furthermore, for Bill Nichols, growing up in New Philadelphia, Ohio he would often see another version of the Knight Twister being flown by Tony Sabler.

In the early 2000's he built a 1/2A version of the Imperial Knight Twister, this is powered by a Norvel .074 motor and flies great! Always wanting to build a larger version it happened to be fate, when a plan, cowl, wheel pants, and the long discontinued Magna-lite material the original construction article called for was found at a swap meet in Washington Courthouse, Ohio. It was without delay that this was purchased. It took Mr. Nichols approx 2 years off and on to complete the Knight Twister and after going on a two show model tour and taking "Best of Show" at both events, the biplane was taken up for a maiden earlier this week. The model won "Best of Show" in 2018 at the Westerville Model Swap Shop/Show and at the Lancaster Model Swap Shop/Show both located in Ohio.

Below is a video of the models maiden flights, the aircraft flies great, was balanced perfectly and only required a few clicks of down trim.

The model is of 1/3 scale and...Continue Reading
Posted by Hobby Details | Yesterday @ 08:31 PM | 562 Views
20 Holes Aluminum RC Tool Stand for Screwdrivers 230x84x20mm
DTEL01028: Black Gold
DTEL01028B: Red
20 Holes: 14mm*4 / 19mm*12 / 20*4mm
Wholesale Price please PM or contact me at: [email protected]
Posted by Bill M - RC | Yesterday @ 08:22 PM | 600 Views
Hi fellow rc enthusiasts

HAIBOXING RC review. This HAIBOXING Hailstorm 4WD RC Buggy review includes unboxing, inspection, functions, features, duration and a drive test in wet conditions.

Get this HAIBOXING RC Cars 1:18 Scale 4WD Off-Road Buggy 36+KM/H High Speed 18858, 2.4GHz All-Terrain Waterproof Remote Control Trucks, Hobby Grade RTR Electric Remote Control Cars for Kids and Adults in UK here:

HAIBOXING Hailstorm 4WD RC Buggy review (15 min 35 sec)

Posted by unboxingexp | Yesterday @ 01:04 PM | 927 Views
Posted by turbinefancy | Yesterday @ 10:12 AM | 1,026 Views
Showing some high and low views around Orange County Modelers Association Field - Bob Swenson Memorial Field aka Black Star at Silverado, CA. Matched with iconic music and some smooth precision acro down low. Enjoy!

OCMA FPV Dusk Tour Low & High (3 min 56 sec)

Posted by Cjhana | Yesterday @ 09:49 AM | 1,041 Views
Hi guys and gals
So far everything seems to be working on the software however when I disconnect led and try to startup (in att mode) using one of four csc commands I get a double yellow blink then 3 red blinks and if I continue holding command led blinks green three times only once, then back to yellow and red blinks? Is this normal?
Also I noticed when I was calibrating sticks the elevator bar moved to -1000 but only 987 the other way after calibration would this effect csc commands starting motors? I bypassed MC to make sure my esc were working , when I connected to throttle channel on rx they all worked fine? Please help
Posted by Montanaman2 | Yesterday @ 08:56 AM | 1,137 Views
Posted by GLSJr | Yesterday @ 06:26 AM | 1,295 Views
Does anybody know if there is a gage for determining the size of bullet connectors?
Posted by rsilk | Yesterday @ 02:34 AM | 1,578 Views
The default serial speed of my HC-05 is 9600 baud which was fast for serial communications in 1975, but I decided to increase it to 57600. The module is connected to S5, so I needed to set the SERIAL5_BAUD to 57. This can be done in various ways, depending on your Ardupilot ground station software.

To change the serial speed on the BT module it is necessary to use a USB/TTL adapter to set the device in "AT" mode which on my module is achieved by holding down a button switch while powering on. In this mode the default speed is set to 38400 baud, so I configured the communication speed on the terminal software to match.

Using the terminal software (Serial USB Terminal on Android phone), I connected to the USB/Serial converter:

After disconnecting and rebooting, I was able to connect to the ground station at a much faster speed via BT
Posted by rsilk | Yesterday @ 02:28 AM | 1,591 Views
The Frsky X8R receiver sends RSSI data back to the XJT Frsky transmitter module so it can be displayed on the radio. However, I wanted to also display it on my groundstation. I believe the same applies for OSD.

The RSSI signal lead on the X8R receiver is connected to the RSSI pin on the F405-Wing. The receiver is connected to the FC via SBUS.

I have set the Arduplane rssi params:

RSSI values are displayed as percentages.
Posted by DutchRC | Oct 12, 2019 @ 09:01 AM | 2,054 Views
Halloa people

Sooo.. what can I say.. Below is a short video about my giveaway..
Really quite a nice camera system! I wouldn't mind wining one myself

check it out.. it's only a few minutes...

Runcam Split 4K HYBRID! GIVEAWAY ! :D - Sponsored by Runcam ! (5 min 37 sec)

Posted by RC Roundtable | Oct 12, 2019 @ 08:44 AM | 2,060 Views
Episode 93: "Purple Rain" is now live!

In this episode, Lee and Fitz chat with Keith Sparks and Tom Blakeney at the BEST event in Texas. They talk about:
-Noteworthy models (6:00)
-Habu from hell (18:20)
-Purple rain (21:45)
-Top secret project (23:00)
-SMALL thoughts (45:00)
-New Creations RC (50:45)

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: [email protected].
Posted by GroundControlRC | Oct 12, 2019 @ 07:47 AM | 2,067 Views

DustOff #5 - FlyBear FX-820 SU-35 Micro ParkJet - In a 5-6mph Wind?

#GroundControlRC #GlueAndFly #ScratchBuildPlanes

Here is a link to the Video:

Well, I wanted to blow some dust off this Micro Parkjet this morning but the wind was at 5-6mph (8-10kph).
It handled this wind so well during the 1st flight I just kept on flying ;-)

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Here are links to this ParkJet & Spare LIPOs:

Flybear FX-820 2.4G 2CH Remote Control SU-35 Glider 290mm Wingspan EPP Micro Indoor RC Airplane Aircraft RTF

Flybear FX-820 2.4G 2CH Remote Control SU-35 Glider 290mm Wingspan EPP Micro Indoor RC Airplane Aircraft RTF

Here is a link to some batteries that will work as spares:

Eachine E010S Micro FPV RC Quadcopter Spare Parts 3.7V 150MAH 45C Battery

Eachine E010S Upgrade 3.7V 240MAH 45C Battery

Here is a link to the Playlist for this Micro Parkjet:

See you in the Air!

Build, Fly, Crash, Repair, Rinse & Repeat!

Consider Supporting Our Channel by becoming a Patron at:
Patrons of the Channel will have Exclusive access to Aircraft Plans & Content!

See Us On Youtube | Patreon | RCGroups
Posted by Tazkiller85 | Oct 12, 2019 @ 05:04 AM | 2,132 Views
Yep Les Amis,
Plein les mirettes !!! Je test aujourd'hui le CIDORA SL5 4S de chez iFlight. Aucune mauvaise surprise avec ce nouvel engin BNF, au contraire même, du déballage au vol en passant par la configuration, tout est propre et bien pensé . Il est aussi beau que bon ! Le CIDORA SL5 est un des premiers BNF Freestyle que je pourrais qualifié de "haut de gamme" pour un tarif aux alentours des 250€. Si vous cherchez un appareil fiable et bien équipé, cet engin a tout pour plaire et pour bien faire, je vous conseillerai certainement d'ajouter un Vifly Beacon pour éviter de le perdre ! Bon Film et Bon vol à tous !!!

iFlight CIDORA SL5 - Review Test Démo - Encore un BNF au Top ! (39 min 55 sec)

NOTATAZ : 18.5/20 50€ de moins et je lui mettais 19.5/20 !

Niveau : Amateurs et Confirmés
Les + : Bonne qualité des matériaux, Conception, Finition, Pré-réglé, Puissant, Equipement haut de gamme, Bluetooth, Résistant et Fiable ...
Les - : Pour chipoter, XT60 jaune et pas de notice dans la boite pour ce prix là ...

- Si Vous voulez aider la chaîne avec un don (tous les dons servent à alimenter les vidéos en produits ou matériel ):

Les produits présentés sont visibles ici (en cliquant sur ces liens vous soutenez ma chaîne) Merci à vous :
- iFlight Cidora SL5 (4S et 6S ) :
- iFlight Cidora SL5-E (4S et 6S ) :
- Pièces châssis Cidora : http:...Continue Reading
Posted by naDah | Oct 12, 2019 @ 04:22 AM | 2,126 Views
Yay! I got arsed! Also got some really decent footage from the get-go.

HBX Devastator + FS Racing Victory X mucking about (4 min 35 sec)

Posted by phyngineer | Oct 12, 2019 @ 03:43 AM | 2,141 Views
Aerial photography, inspection, logistics, plant protection, surveying, security and other applications in the field of UAV industry, the line of sight remote control, image real-time cloud processing, high-definition video stream back to the ability to put forward higher requirements. As the latest generation of cellular mobile communication technology, 5G is also the best communication technology for building digital sky. What changes will it bring to the drone industry?
Compared with 4G, 5G has obvious advantages in the communication coverage of networked UAVs. The new large-scale antenna array adopted by 5G can flexibly and automatically adjust the phase of the transmitted signals of each antenna to meet the regulatory requirements for low-altitude airspace within 500 meters. And the future flight demand of more than 120 meters of drones in the city's high-rise environment. In addition, 5G also has more advantages in remote fine control of drones, flight data security, and industry empowerment.
Networked drones to promote efficient low-altitude economy
Recently, the Dongguan Power Supply Bureau's substation operation professionally applied the “5G UAV+Programming Operation” pilot in China for the first time. It also marks that the Dongguan Power Supply Bureau's substation operation professional is the first in China to realize “5G UAV+Programming Operation”. ".
Compared with the traditional air duty mode, the 110 kV line operation requires two on-duty personnel...Continue Reading