unboxingexp's blog View Details
Posted by unboxingexp | Jun 28, 2020 @ 05:24 AM | 4,605 Views
Posted by unboxingexp | Jun 24, 2020 @ 11:10 AM | 2,950 Views
I'm using this ultralight yet powerful Eachine Nano VTX on my 3inch whoop. I like the vtx but the Nano 3 cam I ve used is not well suited for outdoor flying.
Eachine Nano VTX (1 min 6 sec)

Posted by unboxingexp | Jun 22, 2020 @ 11:49 AM | 7,518 Views
Installed on a cheap E010 toy quadcopter.
Eachine TX06 (1 min 35 sec)

Posted by unboxingexp | Jun 20, 2020 @ 11:31 AM | 13,027 Views
My favorite battery for my brushless 65mm tinywhoop.
Gaoneng 1s 300mah (1 min 7 sec)

Posted by unboxingexp | Jun 04, 2020 @ 11:47 AM | 4,230 Views
Tinywhoop with micro HD camera (1 min 31 sec)

This is probably the cheapest way to get hd footage from your tiny whoop. I installed a 5$ sq11 camera on top. In order to save weight I decased it. Quality of the footage is still mediocre.
Posted by unboxingexp | May 06, 2020 @ 11:22 AM | 6,274 Views
Here are some tips and tricks to make your drone footage look more cinematic. I used my 3 inch cinewhoop in a forrest. All grading and editing was done with simple tools on iMovie.
How to give your drone footage that cinematic look (2 min 3 sec)

Posted by unboxingexp | May 02, 2020 @ 11:05 AM | 5,484 Views
No need to decase your Gopro! You can save 20 gram by simply powering your action cam over its USB port. You only need breadboard jumper wires, a USB step down module and an USB-C plug with PCB. My 3inch cinewhoop weighs only 236 gram with a Gopro Hero 7 black and a Tattu 4s 450mAh battery AUW! In this video it is shown how it's done! More details on the build are available as instructable here.
How to power a Gopro with Lipo balance plug (3 min 32 sec)

Posted by unboxingexp | May 01, 2020 @ 11:11 AM | 5,045 Views
1:24 RC excavator - Mofun 1022 (1 min 29 sec)

This small excavator is great fun. You can even move its bucket vis the remote controller. It's suited for in and outdoor use. Check it out!
Posted by unboxingexp | Apr 21, 2020 @ 03:00 PM | 8,619 Views
Flying Smiley (1 min 21 sec)

Posted by unboxingexp | Apr 20, 2020 @ 11:31 AM | 6,774 Views
Gemfan 3016 propeller (1 min 2 sec)

Low pitch 3 inch props for my ultralight cinewhoop build:
Blades: 3
Pitch: 1.6 inch
Material: PC
Center Hole Inner Diameter: 2mm/1.5mm
Prop disk diameter: 76.49mm
Center Thickness: 5.5mm
Max Prop width: 8.84mm
Adaptive motor: 1108-1303
Recommend motor: 1303-5000
Weight: 1.18g
Posted by unboxingexp | Apr 19, 2020 @ 11:48 AM | 3,165 Views
Flywoo Robo 1202.5 motors (1 min 12 sec)

Ultralight but powerfull! 5800kv for 2-4s setups. 2mm shaft for press fitting props like the Gemfan 3016. I'm using these motors on my ultralight cinewhoop.
Posted by unboxingexp | Apr 11, 2020 @ 11:01 AM | 6,576 Views
Here is another toothpick frame for up to 3inch props. I'm gonna use it in my ultralight cinewhoop.
Fonster Kpro 125 (1 min 4 sec)

Arm plate: 3mm
Other plate: 1.5mm
Material: Carbon Fiber + PLA
Camera adjustable: 57 degree
Weight: 17.6g (with printed part)
Recommend parts( Not Included):
Flight controller: Mounting size 25.5x25.5mm
Camera: 14.7x11.7x7.5mm, E7081
Motor: 9x12, 13xx 14xx
Posted by unboxingexp | Apr 09, 2020 @ 11:03 AM | 5,102 Views
For my ultralight cinewhoop project I used this ultralight AIO FC. I like it.
MAMBA F411AIO 13A (1 min 14 sec)

MCU: STM32 F411
SIX-AXIS: MPU6000
FLASH: NO
OSD: YES
BEC: 5V 1.5A
CURR:YES
INPUT: 2~4S Lipo (8.4V~16.8V)
CONTINUE CURRENT: 13A4
BURST CURRENT: 15A (10S)
SOFT: Dshot 300/600
MOUNTING: 25.5mm/M2
WEIGHT: 5.5g
Size:31.531.59mm
Posted by unboxingexp | Apr 05, 2020 @ 11:30 AM | 5,119 Views
Ultralight FPV cam for tinywhoops and other lightweight drones. I'm using it on my sub 250g cinewhoop. I like the colors indoor, outdoor it seems very bright.
Power: DC 3-5.5V
Current: [email protected]
Housing Material: ABS
Net Weight: 1.1g
Dimensions: L14mm*W14mm*H9mm
Runcam Nano 3 (1 min 12 sec)

Posted by unboxingexp | Apr 03, 2020 @ 11:00 AM | 8,284 Views
Make sure to buy the props with the correct hole diameter as they are available with 0.8mm and 1.0mm.
Weight / G: 0.28G
Center hole diameter: 1MM
Paddle disk diameter: 31mm
Center thickness: 5mm
Maximum blade width: 5.71mm
Adaptation motor: 0703-1103
Gemfan 1219 1.2x1.9x3 31mm 3-blade Propeller (1 min 17 sec)

Posted by unboxingexp | Apr 01, 2020 @ 11:01 AM | 5,321 Views
Very happy with the weight and video quality of this Caddx Firefly FPV set. It's well suited for small builds like tinywhoops. I ve installed it on my 65mm brushless drone. Check it out!
Caddx firefly FPV camera and VTX (1 min 11 sec)

Posted by unboxingexp | Mar 30, 2020 @ 11:31 AM | 4,939 Views
Due to new regulation I tried to build a cinewhoop carrying a full size Gopro well below the 250 gram limit. Here it is at 229 gram with a 3s 300mAh lipo. The drone comes in at 82 gram, the lipo at 30 gram and the Gopro (with battery) at 117 gram. Parts used:
- Fonster Kpro 125
- Diatone Mamba F411 AIO
- Flywoo Robo 1202.5
- Gemfan 3016
- Eachine Nano VTX
- Runcam Nano 3
- TPU mount https://www.thingiverse.com/thing:4221168
Sub 250g 3inch cinewhoop with full size Gopro (2 min 46 sec)

Posted by unboxingexp | Mar 26, 2020 @ 01:08 PM | 5,916 Views
Got me these transparent HQ Props for my TBS Source one. I like them!
HQProp Durable 5X4.3X3 V1S clear (1 min 51 sec)

Posted by unboxingexp | Mar 20, 2020 @ 12:02 PM | 8,101 Views
This is the lightest F4 1S brushless FC in the current market. Slim and sleek in design, 2.69g in weight and better performance on function for maximum weight savings, power, and responsiveness. I had troubles to bind with the integrated Frsky spi receiver in D16 mode but with CLI commands it worked out.
BETAFPV F4 1S Brushless Flight Controller (1 min 21 sec)