lawrence4's blog View Details
Posted by lawrence4 | Jun 16, 2020 @ 08:00 PM | 9,737 Views
Fiu Servo Replace Test Flight (Catch and Rolling) (7 min 5 sec)


Glider add push power success. ;-)

wingspan: 741mm
length: 410mm
weight: 100g
servo: 4g x 2 (plus 1 off hook servo)
receiver: ORX R410X DSMX 4ch
beeper: Matek Lost Model Beeper
motor: C1404 3000KV 9g
F.Prop.: 4.5*3
Battery: Dualsky 2S 250mAh (3mins)
ESC: Turnigy plush 6A

plan Download: http://jivaro-models.org/fiu/page_fiu.htm
Posted by lawrence4 | Jun 04, 2020 @ 08:03 PM | 4,997 Views
Space Shuttle Test SUNNYSKY X2212-9 1500KV (6 min 27 sec)


Motor: SUNNYSKY X2212-9 1400KV
ESC: HOBBYWING SKYWALKER 30A
Weight: 530g
3S 2200mAh
6'15"
Posted by lawrence4 | May 29, 2020 @ 08:27 PM | 4,357 Views
Beta85X Setup Bidirectional DSHOT and RPM Filter (More Flight Time on Tiny whoops) (2 min 6 sec)


More flight time.
Cooler motor.

Step:
1.Update your BLHeli_32 ESC to version 32.7 or newer in order to use bidirectional DShot.
2.Update your FC to Betaflight 4.1 or newer
3.setup RPM filter.(suggest settings in the photo below)

Reference:
1.same as BLHeli_S ESC:
https://www.rcgroups.com/forums/show...y-whoops%21%29
2.HOW TO CONNECT/FLASH BLHELI_32 ESC VIA FC PASSTHROUGH:
https://oscarliang.com/blheli-32-esc-fc-passthrough
3.Download the latest BLHeliSuite configurator for BLHeli_32 here:
https://github.com/bitdump/BLHeli
4.ImpulseRC driver fixer download:
https://impulserc.com/pages/downloads
5.FIX FLIGHT CONTROLLER DRIVER ISSUES Ė CANíT CONNECT OR FLASH FIRMWARE:
https://oscarliang.com/fc-driver-issues-flash-firmware/
Posted by lawrence4 | May 28, 2020 @ 08:17 PM | 3,741 Views
Test use Beta75 pro 2,
Benefit from longer flight time and cooler motor.
More smoothly under 1S 0.5 startup power.

steps:
1.flashing the support bi-directional DShot firmware(for RPM filter),
download the latest firmware marked “48KHz”.
Firmware that allow to run RPM filter in BLHeli_S ESC for free JazzMaverick:https://github.com/JazzMaverick/BLHe...eli_S%20SiLabs

Firstly find out the code name of your ESC.
Connect to BLHeli Configurator.
You can see your ESC code name in the title, for example, mine Beta75 pro 2 is S-H-50 and download the firmware S_H_50_48_REV16_8.HEX

2.SETUP BETAFLIGHT RPM FILTER
Update your FC to Betaflight 4.1 or newer(for now mine is 4.1.6)

Use 4KHz gyro sampling rate and 4KHz looptime.DShot300 ESC Protocol.
Enable “Bidirectional DShot“, and set Motor poles (for example Beta75 pro 2 motor 08028 is 12 poles)

Under Dynamic Notch Filter:
(suggest)
Filter Range at LOW
Width Percent to 0
Q factor to 200
Min frequency to 90

If the motors are cool, it probably means you can reduce filtering further. But this time you can use the two sliders on the top of the filter tab – Gyro Filter Multiplier and D term filter multiplier.(I test it at 1.2 both)

Reference (details explanation):
1.HOW TO GET 48KHZ ON BLHELI_S ESC (MORE FLIGHT TIME ON TINY WHOOPS!): https://oscarliang.com/blheli-s-48khz/
2.SETUP RPM FILTER FOR BLHELI_S ESC (FOR FREE):https://oscarliang.com/setup-rpm-fil...-esc-for-free/
3.BLHeli Configurator:https://github.com/blheli-configurat...rator/releases
4.BLHeliSuite for BLHeli_S: https://github.com/bitdump/BLHeli (download link in the bottom “Read Me” section).
5.HOW TO SETUP BETAFLIGHT RPM FILTER:https://oscarliang.com/rpm-filter/
6.HOW TO FLASH/CONFIGURE BLHELI_S ESC:https://oscarliang.com/flash-blheli-...-pass-through/
7.Bidirectional DSHOT and RPM Filter:https://github.com/betaflight/betafl...and-RPM-Filter
8.HOW TO FLASH/UPDATE BETAFLIGHT ON FLIGHT CONTROLLER?:https://oscarliang.com/flash-update-betaflight/
9.ImpulseRC driver fixer download:
https://impulserc.com/pages/downloads
10.FIX FLIGHT CONTROLLER DRIVER ISSUES – CAN’T CONNECT OR FLASH FIRMWARE:
https://oscarliang.com/fc-driver-issues-flash-firmware/
Posted by lawrence4 | May 16, 2020 @ 12:14 AM | 6,800 Views
Space Shuttle Maiden Flight (4 min 17 sec)


Unfortunately lost onboard camera with the Maiden Flight video.

After fix the head and wing,
I'll change the motor from 300 to 400 class with SUNNYSKY X2212-9 1400KV and 30A ESC,
Do some test for rolling and looping with more power.
Wait for see.
Posted by lawrence4 | Apr 30, 2020 @ 09:52 PM | 5,679 Views
Padci 180 Maiden Flight (0 min 41 sec)

Posted by lawrence4 | Apr 30, 2020 @ 09:50 PM | 5,453 Views
Concorde Maiden Flight (0 min 20 sec)

Posted by lawrence4 | Apr 24, 2020 @ 05:27 AM | 7,212 Views
OpenTX Differential Thrust Setup (1 min 31 sec)


Yaw rudder to Thrust
Stun aileron to Thrust
Thrust hold
Delta mode
Jumper T16 Setup
Posted by lawrence4 | Apr 20, 2020 @ 03:43 AM | 7,515 Views
Padci 180 Build Log (1 min 7 sec)


500mm diameter UFO.
6mm depron.
Less than 250 grams, registration-free, great design, easy assembly, simple equipment.

Plan download: http://jivaro-models.org/padci180/page_padci.html
Posted by lawrence4 | Mar 06, 2020 @ 05:27 PM | 5,316 Views
Fiu Cam Folding Prop with C1404 (0 min 19 sec)


Motor: C1404 3000KV 9g (replaced shaft with 2mm carbon fiber tube)
Folding Prop: 4.5*3
ESC: TURNIGY PLUSH-6A
Posted by lawrence4 | Mar 06, 2020 @ 02:34 AM | 6,646 Views
Fiu Cam Folding Prop installed (0 min 26 sec)


Motor: HexTronik 1811-2000KV 10g
Folding Prop. 4.5*3
ESC: 6A