helikopter600's blog View Details
Posted by helikopter600 | May 24, 2020 @ 04:15 PM | 4,775 Views
...a couple of weeks ago, I have upgraded the transmitter to 3.01 version. Unfortunately the blue charging LED doesn't light up.

Is this defect in firmware or something else?
Is there any downgrading of the radio or a way to factory reset completely?

Thanks
Posted by helikopter600 | Oct 08, 2015 @ 05:00 PM | 5,219 Views
Dream of flying

since years I had bee wishing to build an RC helicopter with petrol engine. In this regards I had collected some spare parts, summed up some ideas a and even constructed my own DIY CNC too. Since Feb.2015 my dream is getting a shape. This build log will eventually share the progress in this project. Thanks for the comments or ideas...
Posted by helikopter600 | May 23, 2011 @ 02:34 PM | 4,268 Views
Hello,

I am trying to change the brushed motor with a brush-less motor in an old, off road Buggy. please see the attachments. The problem that I am facing is to open the gear box. I have opened all the screws but still the main shaft (or exel, by which the both wheels are connected) does not allow me to open the gear box. May be you can guide me, before I completely open by force...
Thanks
Posted by helikopter600 | Oct 22, 2009 @ 06:59 AM | 4,525 Views
Hi pilots,

Here are some of the new photos of my lovely Bird....I took System3 Acrylic color from Daler Rowney. It is process black and has number 040 in Germany. For the red color I took "PrimAcryl" finest artists' acrylic colours. Vermilion red colour. Made in Germany! Well the results i.e. adhesion, shine etc.. are impressive!...
Posted by helikopter600 | Oct 17, 2009 @ 06:13 AM | 4,379 Views
Hi pilots... here are some new photos of my thunderbird intake! I took adhesive for styropor. It called Faust Kleber für Styropor in German. It is light weight and gut to spackle! Generally it takes over night time to dry and then you can sand with rought sand paper of various sizes and then finish with fine size sand paper.

Enjoy

FP
Posted by helikopter600 | Sep 05, 2009 @ 05:03 PM | 6,360 Views
Hello everybody,

Here are some photos to construct my Electric Ducted Fan (EDF) F-16. The construction plan I took from Thomas Nelson. I find it somehow small sized plane but very fascinating in its scale look...

In this part, I will show some initial steps of my construction. I got a cuple of 3mm and 6mm Depron sheets of 1250x800 mm2 area enough for my construction. Even I have some rest that can be used to make another plane... may be a small Cessna!

Depron sheet was cut according to the plan. First, I decided to shape the upper shall...shown in the photos. I tape it while bending as it retained its shape overnight so that it retains afterwards...This step was done by "hot water method"...
Posted by helikopter600 | Aug 02, 2009 @ 03:48 PM | 4,795 Views
Here is my latest project with Depron 6mm...

RC Eurofighter: Part I - Construction engineering (1 min 20 sec)