Posted by old4570 | Today @ 09:04 PM | 3 Views

I spied with my eye ! >
But way to kill interest with the insane shipping cost though ..
Yeah , $136.35 for shipping .. ( Thats on the nose )

Looks interesting , BUTT !
Posted by AquilaGlider | Today @ 06:17 PM | 471 Views
Killin' back in the 70's but got tied up w my career. Now have time to get back to where it all started. Boy have things changed. Balsa, Ambroid, Monokote? Check out my info in 'About AquilaGlider'.
Posted by German Barrios | Today @ 06:16 PM | 471 Views
Just got this RC Surfer 4 edition from Kyosho...I will review him at my local beach after StayHome order passed.
Posted by jmxp69 | Today @ 05:41 PM | 536 Views
I had an opportunity to capture footage of a friend's 2M F3A Pattern Plane.
2 METER Extreme Flight Vanquish F3A RC Plane Pattern Ship Flight (25 min 51 sec)

Posted by Old_Pilot | Today @ 04:57 PM | 614 Views
There's an airplane in here.....I promise
Posted by jhax01 | Today @ 04:00 PM | 676 Views
Timber UMX - 64
Turbo Timber - 130
RocHobby MXS - 56
Hookll Extra 300 - 23
E-Flite Extra 300 1.3m - 12
Future Model Edge 38" - 71
Extreme Flight Edge 48" - 31
Extreme Flight Edge 52" - 17

RF9 (6 minute timer) - 323

Current favorite - EF Edge 52" Bonded with it immediately, it just flies soooo well...
Posted by TMacFPV | Today @ 03:57 PM | 697 Views
Do FPV simulators really help? What's the best way to get started in FPV? 🤔

In this video I'll give you my answers to both these questions

I go over . . .
- the benefits of using a Sim to hone your flight skills
- take a quick look at the "Top 3" Sims
- use one of them to build a basic custom track (in 40 sec's!)
- and demo 4 practice drills you can use to get started with FPV flight! 🤩👍
FPV Simulator Use & Practice Drills (LEARN TO FLY!) (16 min 43 sec)

Posted by GBLynden | Today @ 02:24 PM | 866 Views
This is my Durafly Ugly Stick V2 Electric Sports Model 1100mm Unboxing & Review video.

Durafly Ugly Stick V2 Electric Sports Model 1100mm RC Plane Unboxing & Review (6 min 31 sec)

Review Notes for this RC Airplane from Hobby King:

- Very nice finish on the paint
- The wood prop looks really cool
- Robust landing gear
- Steerable tail wheel
- This is a four-channel plane for a full experience

- The manual was simplified, but left you to your own experience to fill in some of the blanks.
- The battery bay could be better suited for the recommended battery.

I will update this with more videos & other details over time

Link to Durafly Ugly Stick RC Plane:
Posted by burkefj | Today @ 12:07 PM | 1,125 Views
I wanted a disk wing model in my fleet, and tried to put as much star trek shape/decoration into it but still make it flyable as an R/C rocket glider. The star trek ships do not lend themselves to rear mounted motors as the disk and cg requirements are very far forward.

The disk is 19" and gives a much larger area than it visually looks, glide is quite good for the shape of the model. The deflector dish is the end of the nose cone I cut off, reverse and glue back in, the antenna is a piece of spare 3mm carbon rod I rounded off and drilled/glued into the dish. Dish is colored with gold sharpie pen, the warp engine front is tamiya acrylic orange brushed on, the decals here were hand cut but stickershock has the patterns now. Length is 47", disk is 19", 2.6" diameter, weight 11.25 oz rtf using a 24mm E-6 rocket motor. Wing is 6mm depron, warp motor is 9mm depron with 6mm depron laminated on both sides of the engine to allow some rounding to be done for visual effect. The disk decoration is simply a sharpie pen taped to a compass, for the larger circles I taped chop sticks to my compass to extend the legs and then taped the sharpie to one of the legs. The model required a bit of down trim for boost due to the draggy tail and high mounted wing, but that was it.

The day was very clear as was the moon, so I intentionally steered during boost to set up for a moon crossing which timed out great with the theme music.

Dynasoar Rocketry Starship R/C rocket glider (1 min 6 sec)

Posted by unboxingexp | Today @ 11:00 AM | 1,188 Views
Make sure to buy the props with the correct hole diameter as they are available with 0.8mm and 1.0mm.
Weight / G: 0.28G
Center hole diameter: 1MM
Paddle disk diameter: 31mm
Center thickness: 5mm
Maximum blade width: 5.71mm
Adaptation motor: 0703-1103
Gemfan 1219 1.2x1.9x3 31mm 3-blade Propeller (1 min 17 sec)

Posted by GroundControlRC | Today @ 09:48 AM | 1,353 Views

DustOff Flight #3 - Eachine Mini Mustang P51D Warbird RTF Expert Mode in 6-8mph Wind Start to Finish ;-)

Here is a link to the Video:

Eachine Mini Mustang P51D Warbird RTF P51 P-51

#GroundControlRC #GlueAndFly #ScratchBuildPlanes #Eachine #MiniMustang #P51D #P51 #Warbird

This Aircraft is courtesy of Banggood!

DustOff Flight #3 in Expert Mode with Wind on the ground of 6-8mph (10-13kph) and I'm guessing 12-16mph (19-26kph) approx. 20 feet up.
I wish I could take off from the ground with this Plane but it's too rough here and it noses over.
It's a bit of a handful in this much Wind and the Wind got strong enough at one point where I could barely turn it back into the Wind ;-)

You Can Help Support Us By Using Our Affiliate Link To The Product Below. A small commission (At No Cost To You) helps us buy more items to review.

Eachine Mini Mustang P51D Warbird RTF P51 P-51

Spare Parts:

Lipo Battery 1S 360mAh for Eachine Mini Mustang P-51D RC Airplane

Brushed Motor 10mm Hollow Cup for Eachine Mini Mustang P-51D RC Airplane

Prop 130X70mm Propeller Set for Eachine Mini Mustang P-51D RC Airplane

Gearbox for Eachine Mini Mustang P-51D RC Airplane
...Continue Reading
Posted by GEMFAN ts | Today @ 03:29 AM | 1,823 Views
They are all Gemfan new self-design colors of props, Galaxy, 𝗚𝗼𝗹𝗱 𝗳𝗶𝗿𝗲 and 𝗕𝗹𝘂𝗲 𝗼𝗰𝗲𝗮𝗻.

What will you design if you can decide props colors?Let's start imagination!

#Hurricane51433 #New #Color #Design
Posted by VicT | Yesterday @ 10:02 PM | 2,151 Views
x440 was purchased us ed in good condition with a brushed geared 480 and no ESC

Proposed :

motor is an Axi 2820-10
40 -60 amp ESC with brake
12/6 folder
3-4 S 2200 Graphene lipo
2.4 Spektrum 6 ch RX

Wings are approx 170-180 grams

Approx weight of proposed items are 749 grams
Total RTF 929 grams or 32 oz

My concern is that there will not be enough nose weight compared to the original motor and nicad cells.

However a preliminary check shows that this will not be a problem with a 2200 4S Graphene pack or a smaller lighter 1000 3 or4S pack.

I have a Kunai wing that fits the X440 fuse. It is heavier than the stock 440 wing. With 2 spoileron servos she weighs 262 grams which is about 80 grams heavier. Wing area of 308 sq inches would be higher and put the combination into a Warmliner class....Continue Reading
Posted by BDOG1 | Yesterday @ 08:27 PM | 2,269 Views
Oh Ya - second day in a row and this time with some good wind over 20mph
I maiden'd the mini Machine and also my buddy's 48 " Bull Dog
A good afternoon of flying , got there at 2:00 came down at 4:30
I am ready for some time back in the shop
Posted by Suko | Yesterday @ 07:25 PM | 2,327 Views
First off, I learned how to do this from reading Kallend's blog. I am in no way trying to take credit for his work. I am simply trying to help other people out so they better understand how to get this whole thing working. When I read through his blog for the first time, I had many questions and didn't understand some things. The purpose of this guide is to help those who were like myself get the afterburner unit installed successfully.

Please check out Kallend's blog, since he deserves the original credits for this. He also offers a more advanced version of this afterburner that runs off an arduino board that can flicker. I will not be covering that in this guide. This guide will cover the basic, bare-bones LED afterburner setup.

So, let's start off with the basics. Here's what you will need to get started..

This guide assumes you have basic soldering skills. If you do not, then I don't recommend going any further until you do. There's plenty of guides on soldering on Youtube. Go watch those and get some practice and come back when you're ready. This guide will show you how to setup and get your LED unit...Continue Reading
Posted by dealdealerunltd1 | Yesterday @ 06:45 PM | 2,324 Views
Latest & Greatest Toy Purchase of March 2020..

Full Custom S&S Bobber..
Polished S&S 113" Evo w/ 656 Cam, Jetted & Spaced Super G Carb, Forged Pistons, Crane Ignition, Push Button Compression Releases, Vance & Hines Big Radius Exhaust, JIMS Racing HP Billet Clutch w/ Fat 5 Trans, Compufire Gen 3, All Performance Machine Chrome Upper & Lower Controls, Revtec Chrome Calipers, Braided Lines, Super Rare Old School Polished Boyd Coddington Wheels & Matching Rotors, Chrome Paughcho Double Springer Wide Glyde Style Front End w/ 4" Chrome Risers & Wild One Drag Bar Handle Bars, LowBrow Custom Leather Seat
...Continue Reading
Posted by RC Roundtable | Yesterday @ 04:28 PM | 2,464 Views
Episode 105: "Executive Blunder" is now live!

In this episode, the AMA's Tyler Dobbs tells us about a proposed executive order that could impact our hobby:
-Tyler spills the beans (1:00)
-The gang assesses things (18:30)
-Virus purchase (39:35)

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.
We would love to read your comments and ideas. Please drop us a line here, on twitter, or via email: [email protected].

You can visit our website at to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us an email: [email protected].
Posted by Hibbertjayy | Yesterday @ 12:44 PM | 2,990 Views
How do i reattach antenna to receiver ? Its snapped at the solder point. I have soldered it back , messily as im a beginner , but its definitely connected.

I read a thread on here and i quote ''configuration .. is critical'' so is there a specific way ? All wires look the same in the casing theyre jus thin copper ones , about 5 or 6 of em.