TinkleWid's blog View Details
Archive for September, 2018
Posted by TinkleWid | Sep 28, 2018 @ 06:51 AM | 7,753 Views
🐢 Caddx Turtle 1080p 60/FPS raw footage on BR3 3" inch Quad with XJB 145 stack and motors

Updated the Caddx Turtle from the original firmware from v1 to v2. All the old arefacts are gone and the picture is much smoother compared to my last flight footage (the only issue is that the 16:9 fpv view is now letterboxed)

Still loving my new BR3 Frame from Kwad Karl which flies so much smoother than the original xjb frame. It is much more stable and carries a 4s 850mah very nicely. This video was the Tatu 4S 650mah.

To upgrade the firmware copy download to empty sd card from https://lunchboxfpv.zendesk.com/hc/e...RE-UPDATE-V2-1
ENSURE YOU HAVE THE ORIGINAL FIRMWARE (or risk a brick)

Smooth 🐢 Caddx Turtle v2 Firmware Update (1080p 60FPS) on BR3 3" HGLRC XJB 145 Quad (2 min 9 sec)


Quad Set-Up

3 inch BR3 Frame: https://droiddesignfpv.co.uk/product...-fpv-frame-kit

PIDS used for this video on Betaflight 3.3 (same as xjb 145 for first test)
Roll: 45, 45, 27; Pitch: 46, 50, 30 Yaw:70, 45, 20
Tatu 4S 650mah but moving to 850mah to reduce sag

HGLRC XJB 145 Mini Quad chasis https://www.banggood.com/HGLRC-XJB-1...SABEgJKx_D_BwE

Jumper T8SG https://www.gearbest.com/radios-rece...SABEgJ8cvD_BwE

Caddx Turtlet or Caddx Turtle https://www.banggood.com/Caddx-Turtl...p-1320281.html

Gemfan 3052
Posted by TinkleWid | Sep 23, 2018 @ 05:33 AM | 4,955 Views
What a step up from the SQ12! Even without the firmware update!!

🐢 Caddx Turle 🐢 Firmware/Settings Test on XJB145 with BR3 Frame - Sunset Run (2 min 43 sec)


Testing setting on my Caddx Turtle with the original firmware (v1) during sunset. I forgot to upgrade the firmware before starting so there are some artefacts on the footage due to the lower bitrate. However, the lack of detail gives it a dreamy feeling. These should be much improved with the firmware update.

However, I am loving the new BR3 Frame from Kwad Karl. It flies so much better than the original xjb frame. It is much more stable and carries a 4s 850mah very nicely. Further testing to follow when the storms pass.

To upgrade the firmware copy download to empty sd card from https://lunchboxfpv.zendesk.com/hc/e...RE-UPDATE-V2-1

Quad Set-Up

BR3 Frame: https://droiddesignfpv.co.uk/product...-fpv-frame-kit

PIDS used for this video on Betaflight 3.3 (same as xjb 145 for first test)
Roll: 45, 45, 27; Pitch: 46, 50, 30 Yaw:70, 45, 20
Tatu 4S 650mah but moving to 850mah to reduce sag

HGLRC XJB 145 Mini Quadunder insides https://www.banggood.com/HGLRC-XJB-1...SABEgJKx_D_BwE

Jumper T8SG https://www.gearbest.com/radios-rece...SABEgJ8cvD_BwE

Caddx Turtlet or Caddx Turtle https://www.banggood.com/Caddx-Turtl...p-1320281.html

Comparison with Quelima SQ12 720p footage
Lens Modified SQ12 Camera on HGLRC XJB 3" Quad - Smooth Flying (Betaflight 3.3) (1 min 24 sec)