Comments (0)
Add Comment
-
Views: 49
24" Speedy Dust and the 6S 35" Dust. -
Views: 51
EM Dust rebuild is on the left. On the right is a new 20" Dust running on 4S. -
Views: 50
Bill Evans Polestar from an Eureka short kit. Since this picture all the sanding is complete and ready for covering and canopy install. -
Views: 33
Ultimate Kaos from a BlueJay short kit. Power will be a RimFire .46 turning an 11 X 7 prop on 6S power. RTF weight is looking like92oz (5.75 lbs). If I can build it straight it should fly great! Glassed the center toaday 3/10/23 -
Views: 41
SunFly 5. Finally managed to come up with a cowl installation I could live with. The SF5, Kaos and Polestar all have cowls held on by 4 small pins. I did the final sanding with the cowls installed. Still have the Kaos to do. -
Views: 44
Another build from 2022, The ResDart. Electric powered 2 meter glider. It flies very well - just different from "normal" gliders. -
Views: 47
The first 3 gliders are also new builds from 2022. Astro Flight Mini Challenger 60", Tetra 2M and Astro Flight Challenger 72 - all electric powered gliders. -
Views: 42
Cowl separated from the fuselage and added ply wood end plates for the pins.
-
Views: 57
First mix , ch6 master ch1 slave, pos and neg mixes 100% (i picked these arbitrarily) -
Views: 64
2nd mix ch1 as master, 4 as slave, this would be the relationship in "on" condition -
Views: 57
Display showing ch6 "up" -
Views: 63
Display switch D "down" ch1 stick full left -
Views: 45
Switch D down, ch1 stick full right.