Posted by vincent123 | Today @ 11:56 AM | 153 Views
Hi folks,

just saying that i'm still alive and kicking, if anyone cares, that is.

Turning older every year.
Lost my hair.
Grew a beard (to compensate
Broke my right elbow during a buggy kite session (a whole story, some time later).
Broke my speed record with 78kg/h .. in a buggy ... powered by only .. the wind ..speaking about thrills.

My building hobby is not dead, just lingering somewhere in my entity.

Cya soon !
Posted by DutchRC | Today @ 11:02 AM | 153 Views
Howdy people

last week I released a video of my first flight with the Esky 300 v2 And eventhough it flew pretty o.k. I thought I should be able to do better :P (I had not flown a heli in years).. sooooo take 2 today!

Let's see if I can actually fly it as bit better this time

Esky E 300 v2 Helicopter! Flight Test RETRY :P (9 min 54 sec)

Posted by lasakro | Today @ 01:11 AM | 1,190 Views
Built 2019- First large heli

ESC- Castle Talon 120 HV
Motor: Align RMC-BL800MX 520KV
Batteries: Gens ACE 5Ah 6S 45C GA-B1018
Main Blades: RotoStar 690mm
Cyclic Servos: KST DS725MG
Tail Servo: KST DS525MG
Receivers: FrSky RX8R Pro & X8R
FBL Controller: Bavarian Demon AXON
Telemetry: FrSky Smart Port Sensors SP2UART (Voltage), SP-RPM (RPM & Temp)
Gearing: Pinion- 13T, Main- 115T
Posted by phil alvirez | Yesterday @ 02:58 PM | 2,188 Views
perhaps some data on our source wouldnt hurt.
how were invented and developed is a fascinating story. enjoy.
https://en.wikipedia.org/wiki/Lithium-ion_battery
Posted by unboxingexp | Yesterday @ 11:27 AM | 2,550 Views
Works great! Gonna stick with ELRS, it's a great and affordable radio link system. If you can't update your BETAFPV TX open the casing and hold down the button on the PCB . Some early TX were faulty.
BETAFPV nano ExpressLRS 2.4GHz TX module (1 min 37 sec)

Posted by Tazkiller85 | Yesterday @ 05:05 AM | 3,049 Views
🧐Yep Les Amis,
Le paquebot des airs ! lol. Nous testons aujourd'hui le monstre de chez HGLRC et REKONFPV, le Rekon 7 Pro. Un Kwad 7 pouces très bien équipé, GPS, F7, Buzzer autonome et VTX de 800mW pour cette version analogique. Si on met de côté le souci rencontré sur notre exemplaire et résolu avec les hélices bipales, cet engin est un digne successeur de la lignée des Rekon ! Un tarif très raisonnable pour un appareil de cette qualité de finition et d'équipements, un châssis bien rigide et pas mal de place pour installer tous les accessoires voulus. Le vol est doux, précis et extrêmement fluide. Premier 7 pouces pour Yacine et moi, nous avons été agréablement surpris et assez impressionnés par son pilotage, un peu de douceur dans ce monde de brutes ! lol ... Prenez soin de vous (et des autres) et merci à tous pour votre soutien .

REKON 7 PRO HGLRC & REKONFPV - Review Test Démo - Problème résolu, pour l'instant ... (1 hr 0 min 9 sec)


🧐NOTATAZ : 17/20 Impressionnant mais .... Affaire à suivre.

Chez BANGGOOD
- REKON 7 PRO analogique (Coupon Drones6) : https://bit.ly/3lFY8MV
- REKON 7 PRO numérique (Coupon Drones6) : https://bit.ly/3CoAxHb
- Li Ion 6S 3000mAh Auline : https://bit.ly/3hIkuvQ
- Lipo 6S 1800mAh : https://bit.ly/3lw3slM
- Chargeur conseillé pour lipos : https://www.banggood.com/custlink/3mvE6ivWS2

Chez REKONFPV
- REKON 7 PRO analogique : https://bit.ly/3kai1vO
- Châssis REKON 7 PRO : ...Continue Reading
Posted by Martian McFly | Yesterday @ 02:32 AM | 3,249 Views
So, I decided to take the long range rig on holiday and here's the footage, I managed to get a round 4Km out before my balls reclined back in to my stomach and turned back. I'm pretty sure that I could have go a lot further but didn't fancy the walk if the worst happened.

A beautiful place to visit and fly!

Relaxing Long Range Holiday FPV 👽 (10 min 37 sec)


Enjoy!
Martian
Posted by Zzx | Yesterday @ 12:59 AM | 3,363 Views
Found a park where I live and it had a massive hill at the other end, lets climb it.

FPV Hill Climb in the Tonka Summit Rover. Sept 17th 2021 (4 min 40 sec)

Posted by Teo40 | Yesterday @ 12:36 AM | 3,383 Views
I bought this plane. AA 2.10, 6s battery, motor with reducer. the old owner says he bought it in China where he lived for several years. does anyone know him? some tips on how to make it run a little more as it is very slow. the measures are not written on the blade
Posted by K2-tokyo | Sep 17, 2021 @ 10:18 PM | 3,651 Views
This is my short memo concerning the Radio Master 16S for an Eachine E129 and a Blade Nano S2 (never for 3D).

I. The method of the firmware upgrade for Eachine E129 helicopter, and OMP M2(original receiver)

1, At first, you had better upgrade the transmitter firmware to the newest one by using any PC software OpenTX Companion:
https://www.radiomaster.nl/how-to-up...omaster-tx16s/

2, The internal multi-module upgrade for AETR-type protocol (E119, E129, OMP-M2);
See
https://www.radiomaster.nl/how-to-up...omaster-tx16s/

Use the Multi-Module firmware in
https://downloads.multi-module.org

Select a module: RadioMaster TX16S Internal Module (4-in-one)
Firmware version: 1.3.2.77
Then download: multi-stm-serial-aetr-v1.3.2.77.bin

Transfer this file into the "FIRMWARE" folder in the SDcard in the transmitter by using the USB-cable. Then, after cut the USBcable, do the firmware flashing operation by the transmitter!

3, You can find E129, OMP in the internal multimodules.


II. Blade Nano S2 helicopter

1, (channel order). My main receivers are of Futaba, and so my default channel order is AETR in RADIO SETUP.
I know the channel order of blade helicopters is TAER, but in the setting of RadioMaster 16S the channel order of NanoS2 should be AETR. (I do not know why).

2, Create a new model; choose
(i) plane (ii) motor: yes CH3, (iii) Aileron: one, CH1, (iv) flaps: no, (v) Ele, Rudder: CH2 A, CH4 B, (vi) Yes.

3, (Mode Set up)
Internal...Continue Reading
Posted by cuavlindy | Sep 17, 2021 @ 08:38 PM | 3,654 Views
CUAV P8 is finished mass production and having stocks now .come and know more about us in store.cuav.net.
Posted by djmoose | Sep 17, 2021 @ 06:56 AM | 4,750 Views
I wanted to make a short video to show the details of these really nice padded wing bags from Extreme Flight RC. I'll unbox and go over the features to give you an idea of what is available if you're in the market for a set of nice wing bags for your favorite model airplane.

https://extremeflightrc.com/
50cc Padded Wing Bags - https://bit.ly/3nsNTOn
35cc Padded Wing Bags - https://bit.ly/3k8heM6

Extreme Flight RC Padded Wing Bags - Unbox and Review - 50cc and 30cc (6 min 1 sec)

Posted by Jack Crossfire | Sep 16, 2021 @ 11:00 PM | 5,667 Views
So the lion kingdom finally got a set of retaining rings & the tool for ending the motors slipping off. It should now be possible to use wide offroad tires. 1 fell swipe of the full faith & credit ended a year of problems. Full faith & credit is sometimes worth a lot more than being creative.

The tool is too big to fit in the 6mm retaining rings, but is necessary to put them on. Once on, the tool can easily fit to take them off. There is a choice between angled tips & straight tips, but they're all different sizes. The smallest tip is only straight. What helps is using a metal shaft to twist apart the retaining ring just enough for the tool to get in.
Posted by aero nishi | Sep 16, 2021 @ 05:35 PM | 6,650 Views
RC Factory Step One BABY with Whoop FC - automated flight (0 min 40 sec)

Whoop FC was installed to RC Factory Step One BABY. Since it flies with brushed motors, I used brushed FC, Happymodel BeecoreX FR F4.

○Betaflight Setting
The setting is very simple because it uses only two motors. The right wing motor was connected to the motor 1 connector of the FC and the left one was to motor 2 connecter. The differential thrust was set to control yaw by rudder. The betaflight cli commands were as follows:

# mixer
mixer CUSTOMAIRPLANE
mmix reset
mmix 0 1.000 0.000 0.000 -1.0 #Motor1
mmix 1 1.000 0.000 0.000 1.0 #Motor2
set small_angle=180

PID Setting
Since the yaw axis control was used to control the motor speeds, only yaw PID settings were necessary. I used P 15 I 0 D 0.

Board Alignment
FC was placed inside the fuselage as shown in the photo. The board alignment was roll -90 pitch -135 yaw 0. Since FC gets very hot, it is recommended to remove the canopy and cool down after each flight.

○Wheels
GWS 25mm wheels were installed for takeoff and landing in the gym.

○FPV
This is optional but BeecoreX has OSD and VTX, so you can turn it into an FPV plane by simply connecting a camera (Runcam Nano 3, weighs only 1.1g!). Be careful of cooling FC. It may be necessary to place the FC outside the fuselage.

○Like an Indoor Rubber-Powered Airplane
You can fly Step One BABY with the above settings. I attached a hex file I used to make it fly like an...Continue Reading
Posted by simages | Sep 16, 2021 @ 02:42 PM | 6,961 Views
Never got into "correctly" programming of a 6 servo Sailplane, but started to program a few Acro models with Crow/Butterfly and implementing spoilers on a couple....... That's when I knew it was time to get serious about actually programing my Stealth DX18 to create models for a better experience and of course for flying success!

So, I started to search for help on the configuration and setups for my two 6 servo sailplanes and that's when I came across Sherman Knight, aka Duworm and Red Sailplane where his work is available.
Total of 250 pages, Holy C***, worth every dollar!
Posted by mojowoykin | Sep 16, 2021 @ 11:28 AM | 7,192 Views
Hey All,...

If anyone is interested...
I can post these in the classifieds,..
shoot me a PM .
I can also meet up locally in San Diego county.

We Plan on some caps and warmer stuff in a bit.

Later..
DonnyQ
you can also email me from www.SlopePilot.com

(currently)...

Pre-washed cotton
Black and white
2XL
XL
$15 plus ship

Individual Requests will be considered

Posted by C5000052 | Sep 16, 2021 @ 10:21 AM | 7,365 Views
Hi, I’ve just completed this kit I bought. I originally had one that my father built for me in 1967. I’ve tried to use the original colour scheme. I hope you like it. Thanks Keith