UnknownForces RC's blog View Details
Posted by UnknownForces RC | Yesterday @ 11:37 AM | 1,457 Views
Center gearbox of the Ghost Rabbit GR1 (0 min 17 sec)


The internal structure of the center gearbox of the Ghost Rabbit GR1 has been designed to make disassembly and maintenance as easy as possible.
The modular design allows for working on the internal components without the hassle of pulling all gears, shafts and bearings apart.
Posted by UnknownForces RC | Nov 12, 2019 @ 11:42 AM | 589 Views
Motor quick release of Ghost Rabbit GR1 (0 min 16 sec)


Motor quick release: The first gear stage (which is normally inside the center transmission housing) is only slipped onto the motor. No screws in the pinion required.
Posted by UnknownForces RC | Nov 12, 2019 @ 11:34 AM | 528 Views
Center gear box of Ghost Rabbit GR1 (0 min 16 sec)


The center gear box will feature a quick release for the motor pinion, no screws which may come lose are required.

Currently the front, center and rear gear boxes are not fully assembled yet, because we're still waiting for a few parts to arrive. Some parts for the differential locking mechanism have to be CNC machined, a square hole requires wire cutting for a precise result, some other parts are still in the plating process. The manufacturing takes a lot of different steps, so please be patient and bear with us.
Posted by UnknownForces RC | Nov 09, 2019 @ 11:42 AM | 757 Views
Assembled front differential unit of our Ghost Rabbit GR1 (0 min 18 sec)


Assembled front differential unit of our Ghost Rabbit GR1.
Fully machined all metal transmission housing, the differential itself runs in large 20x32x7 mm bearings for real reliability.
Posted by UnknownForces RC | Nov 09, 2019 @ 11:35 AM | 648 Views
Springs for the rear axle disconnect system and the stabilizer bars for GR1 (0 min 19 sec)


The springs for the rear axle disconnect system and the stabilizer bars for our Ghost Rabbit GR1 returned from the surface treatment process.
They have been nickle plated to improve corrosion resistance and appearance.
Posted by UnknownForces RC | Nov 07, 2019 @ 10:17 AM | 1,258 Views
Ghost Rabbit's center transmission (0 min 16 sec)



Complete bracket with intermediate gears and bearings for the primary gearing in the Ghost Rabbit's center transmission. Since this bracket can be put together as a separate unit which will be secured and supported by the transmission case, assembly and maintenance are simplified and convenient.
Posted by UnknownForces RC | Nov 06, 2019 @ 07:36 AM | 529 Views
3D CAD view of the rear axle (0 min 14 sec)


3D CAD image showing the full metal rear axle of the Ghost Rabbit GR1.
Posted by UnknownForces RC | Nov 05, 2019 @ 11:17 AM | 517 Views
Aluminum servo arms (0 min 58 sec)

Posted by UnknownForces RC | Nov 02, 2019 @ 09:14 AM | 2,273 Views
Carbon steel materials of Ghost Rabbit GR1 (0 min 16 sec)


Worried about parts will rust while racing in water? Worried about rusting will affect the appearance of parts? Please don't worry now, all carbon steel materials of Ghost Rabbit GR1 are electroplated (except pins, gears, internal parts, etc.)
Posted by UnknownForces RC | Oct 30, 2019 @ 11:17 AM | 2,825 Views
Ghost rabbit GR1 aluminum parts (0 min 15 sec)


Half of the Ghost rabbit GR1 aluminum parts have finished oxidizing.
Posted by UnknownForces RC | Oct 29, 2019 @ 11:10 AM | 2,188 Views
The Ghost Rabbit GR1 trailing arm is assembling (0 min 17 sec)


According to the production schedule most metal parts are either hardened and surface plated (parts made of tool steel) or anodized (aluminum parts) as the last processing step. Today carbon fiber inlays came in from the supplier, so we could proceed with the assembly of the Ghost Rabbit GR1. We started with completing the trailing arms...
Posted by UnknownForces RC | Oct 28, 2019 @ 12:00 PM | 1,778 Views
Ghost Rabbit GR1 polycarbonate protectors (0 min 19 sec)


Vacuum-formed polycarbonate protectors for chassis plate, rear axle center and trailing arms. They're made from 1.5 mm PC sheet material and will come as standard with our new Ghost Rabbit GR1.
Posted by UnknownForces RC | Oct 28, 2019 @ 11:10 AM | 1,764 Views
Ghost rabbit GR1 gear processing has been completed (0 min 16 sec)


Ghost rabbit GR1 gear processing has been completed (all), then start the process of subsequent heat treatment and other processes
Posted by UnknownForces RC | Oct 26, 2019 @ 05:16 AM | 1,738 Views
Posted by UnknownForces RC | Oct 24, 2019 @ 10:57 AM | 2,629 Views
The steering system of a large-scale car has to handle high impact forces through the wheels. If this impact load is not reduced effectively, parts will be deformed and fail.

Dual servo saver springs and tough high-strength nylon are a proven way to control the impact forces.
Posted by UnknownForces RC | Oct 22, 2019 @ 08:44 AM | 2,738 Views
Easy disassembly on Ghost Rabbit GR1 (0 min 17 sec)


Spherical bearings on the trailing arms of our Ghost Rabbit GR1 are secured by snap rings which can be installed and removed without the need for snap ring pliers. We strive to keep the number of required tools for our cars low. A set of common Allen key wrenches will do for most of the disassembly on a Ghost Rabbit GR1.
Posted by UnknownForces RC | Oct 22, 2019 @ 04:21 AM | 1,672 Views
GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 17 sec)


Parts are prepared well for assembling the Ghost Rabbit GR1.
Posted by UnknownForces RC | Oct 20, 2019 @ 12:06 PM | 2,964 Views
Ghost Rabbit GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 13 sec)


The Ghost Rabbit GR1 comes with real carbon fiber accent plate inserts on trailing arms, rear axle brace, steering centerlink and center transmission mounts to make the car's look match the car's performance.