UnknownForces RC's blog View Details
Posted by UnknownForces RC | Yesterday @ 11:33 AM | 2,527 Views
Motor mounting plate of Ghost Rabbit GR1 (0 min 34 sec)


The first part of this video shows the CNC processing of an actuator disk for the diff lock of the Ghost Rabbit GR1. The part will be heat treated after the processing.

The second part of the video shows the motor mounting plate for the same car.
While most of its shape is processed on a CNC milling machine, the final steps of machining the bearing seats and some other surfaces which have all to be concentric are done on a CNC lathe.

A CNC milling machine is by design not capable of providing the same precision for these steps as a lathe. A lathe gives truly round and concentric results because the part itself rotates, not the tool.
A CNC milling machine makes a circle in many small steps, it interpolates the rounding. This is usually sufficient, but a lathe is clearly superior here.

Therefore we go the extra mile and use a lathe for these important steps of the processing. By doing so we achieve a precision for the bearing position of 0.005 mm."
Posted by UnknownForces RC | Nov 14, 2019 @ 11:37 AM | 1,717 Views
Center gearbox of the Ghost Rabbit GR1 (0 min 17 sec)


The internal structure of the center gearbox of the Ghost Rabbit GR1 has been designed to make disassembly and maintenance as easy as possible.
The modular design allows for working on the internal components without the hassle of pulling all gears, shafts and bearings apart.
Posted by UnknownForces RC | Nov 12, 2019 @ 11:42 AM | 619 Views
Motor quick release of Ghost Rabbit GR1 (0 min 16 sec)


Motor quick release: The first gear stage (which is normally inside the center transmission housing) is only slipped onto the motor. No screws in the pinion required.
Posted by UnknownForces RC | Nov 12, 2019 @ 11:34 AM | 558 Views
Center gear box of Ghost Rabbit GR1 (0 min 16 sec)


The center gear box will feature a quick release for the motor pinion, no screws which may come lose are required.

Currently the front, center and rear gear boxes are not fully assembled yet, because we're still waiting for a few parts to arrive. Some parts for the differential locking mechanism have to be CNC machined, a square hole requires wire cutting for a precise result, some other parts are still in the plating process. The manufacturing takes a lot of different steps, so please be patient and bear with us.
Posted by UnknownForces RC | Nov 09, 2019 @ 11:42 AM | 770 Views
Assembled front differential unit of our Ghost Rabbit GR1 (0 min 18 sec)


Assembled front differential unit of our Ghost Rabbit GR1.
Fully machined all metal transmission housing, the differential itself runs in large 20x32x7 mm bearings for real reliability.
Posted by UnknownForces RC | Nov 09, 2019 @ 11:35 AM | 661 Views
Springs for the rear axle disconnect system and the stabilizer bars for GR1 (0 min 19 sec)


The springs for the rear axle disconnect system and the stabilizer bars for our Ghost Rabbit GR1 returned from the surface treatment process.
They have been nickle plated to improve corrosion resistance and appearance.
Posted by UnknownForces RC | Nov 07, 2019 @ 10:17 AM | 1,268 Views
Ghost Rabbit's center transmission (0 min 16 sec)



Complete bracket with intermediate gears and bearings for the primary gearing in the Ghost Rabbit's center transmission. Since this bracket can be put together as a separate unit which will be secured and supported by the transmission case, assembly and maintenance are simplified and convenient.
Posted by UnknownForces RC | Nov 06, 2019 @ 07:36 AM | 538 Views
3D CAD view of the rear axle (0 min 14 sec)


3D CAD image showing the full metal rear axle of the Ghost Rabbit GR1.
Posted by UnknownForces RC | Nov 05, 2019 @ 11:17 AM | 527 Views
Aluminum servo arms (0 min 58 sec)

Posted by UnknownForces RC | Nov 02, 2019 @ 09:14 AM | 2,282 Views
Carbon steel materials of Ghost Rabbit GR1 (0 min 16 sec)


Worried about parts will rust while racing in water? Worried about rusting will affect the appearance of parts? Please don't worry now, all carbon steel materials of Ghost Rabbit GR1 are electroplated (except pins, gears, internal parts, etc.)
Posted by UnknownForces RC | Oct 30, 2019 @ 11:17 AM | 2,840 Views
Ghost rabbit GR1 aluminum parts (0 min 15 sec)


Half of the Ghost rabbit GR1 aluminum parts have finished oxidizing.
Posted by UnknownForces RC | Oct 29, 2019 @ 11:10 AM | 2,199 Views
The Ghost Rabbit GR1 trailing arm is assembling (0 min 17 sec)


According to the production schedule most metal parts are either hardened and surface plated (parts made of tool steel) or anodized (aluminum parts) as the last processing step. Today carbon fiber inlays came in from the supplier, so we could proceed with the assembly of the Ghost Rabbit GR1. We started with completing the trailing arms...
Posted by UnknownForces RC | Oct 28, 2019 @ 12:00 PM | 1,784 Views
Ghost Rabbit GR1 polycarbonate protectors (0 min 19 sec)


Vacuum-formed polycarbonate protectors for chassis plate, rear axle center and trailing arms. They're made from 1.5 mm PC sheet material and will come as standard with our new Ghost Rabbit GR1.
Posted by UnknownForces RC | Oct 28, 2019 @ 11:10 AM | 1,771 Views
Ghost rabbit GR1 gear processing has been completed (0 min 16 sec)


Ghost rabbit GR1 gear processing has been completed (all), then start the process of subsequent heat treatment and other processes
Posted by UnknownForces RC | Oct 26, 2019 @ 05:16 AM | 1,744 Views
Posted by UnknownForces RC | Oct 24, 2019 @ 10:57 AM | 2,637 Views
The steering system of a large-scale car has to handle high impact forces through the wheels. If this impact load is not reduced effectively, parts will be deformed and fail.

Dual servo saver springs and tough high-strength nylon are a proven way to control the impact forces.
Posted by UnknownForces RC | Oct 22, 2019 @ 08:44 AM | 2,746 Views
Easy disassembly on Ghost Rabbit GR1 (0 min 17 sec)


Spherical bearings on the trailing arms of our Ghost Rabbit GR1 are secured by snap rings which can be installed and removed without the need for snap ring pliers. We strive to keep the number of required tools for our cars low. A set of common Allen key wrenches will do for most of the disassembly on a Ghost Rabbit GR1.
Posted by UnknownForces RC | Oct 22, 2019 @ 04:21 AM | 1,679 Views
GR1 1/5 4WD SOLID REAR AXLE TRUCK (0 min 17 sec)


Parts are prepared well for assembling the Ghost Rabbit GR1.