UnknownForces RC's blog View Details
Posted by UnknownForces RC | Today @ 03:33 AM | 39 Views
UFRC Growler GX1 1/6 scale Brushless Buggy (0 min 17 sec)


Racing video from our customer RC-Car-Shop Hobbythek.
Posted by UnknownForces RC | Yesterday @ 01:25 AM | 301 Views
Our 2WD Brushless 1 / 6th Desert Buggy from CARS&Details Magazine .

UFRC Growler GX1 (1 min 59 sec)

Posted by UnknownForces RC | Sep 18, 2019 @ 02:00 AM | 1,526 Views
Desert buggy design body panels made of clear polycarbonate.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:24 AM | 1,457 Views
Driveline parts (drive shafts and cups, gears) and turnbuckles made of chrome-moly steel.
Posted by UnknownForces RC | Sep 18, 2019 @ 01:17 AM | 1,477 Views
Very smooth and quiet running transmission with longitudinally mounted motor. Completely encapsulated, no exposed gears. The UFRC Growler GX1 is almost as quiet as a small 1/10th scale car! This is particularly due to the spiral cut bevel gears and helical cut spur gears. The positive connection of the gears on the intermediate shaft is designed as a profiled shaft based on the cycloids of higher level.
Posted by UnknownForces RC | Sep 17, 2019 @ 03:27 AM | 1,468 Views
(Left Losi right UFRC)
The huge spindles at the front suspension fill the rims almost completely and guarantee high load capacity. The joint balls in the a-arms have a diameter of 15 mm (FG uses only 10 mm for the same vehicle size).

Front and rear spindles/uprights prepared for installation of in-wheel brakes.
Posted by UnknownForces RC | Sep 17, 2019 @ 03:06 AM | 558 Views
Drive shafts with wheel-side CVD joint as in Losi 5ive vehicles. The drive pin on the diff side is also replaceable and has a diameter of 6 mm!
Posted by UnknownForces RC | Sep 17, 2019 @ 03:02 AM | 413 Views
Differential cup made of cold extruded aluminum, no fragile cast part!
Posted by UnknownForces RC | Sep 17, 2019 @ 02:48 AM | 415 Views
Large-volume shock absorbers with oversized 8 mm piston rods.
Posted by UnknownForces RC | Sep 12, 2019 @ 04:32 AM | 489 Views
The UFRC Growler GX1 has metal thread inserts in the plastic parts at high-stress mounting points.
Posted by UnknownForces RC | Sep 12, 2019 @ 04:28 AM | 495 Views
Aluminum skid plate/chassis reinforcement for the front axle as standard. Steel reinforcement plate for the chassis in the servo saver area as standard.
Posted by UnknownForces RC | Sep 12, 2019 @ 02:59 AM | 497 Views
Front suspension with ball-raced balance beam for the shocks (can also be locked if required) for running on very uneven terrain.
Posted by UnknownForces RC | Sep 12, 2019 @ 02:57 AM | 501 Views
Machined connecting plates for the hinge pins with exchangeable plastic inserts as standard.
Posted by UnknownForces RC | Sep 12, 2019 @ 02:56 AM | 453 Views
Bent and milled tub chassis made of 5 mm thick aluminum for extreme rigidity.
Posted by UnknownForces RC | Sep 06, 2019 @ 04:00 AM | 1,175 Views
4WD solid rear axle, take split structure for easy maintenance.
Posted by UnknownForces RC | Sep 03, 2019 @ 04:50 AM | 688 Views
Includes: Headlights, searchlight, fog lights, front and rear turn signals, high-frequency tail lights, brake lights.
Posted by UnknownForces RC | Sep 02, 2019 @ 10:11 PM | 773 Views
The LSD Lock of GR1 4WD SOLID REAR AXLE TRUCK.
Posted by UnknownForces RC | Sep 02, 2019 @ 02:47 AM | 1,064 Views
Modular design, compact and logical layout , maximizing interior spacing.
Posted by UnknownForces RC | Sep 02, 2019 @ 02:45 AM | 991 Views
GR1 1:5 4WD REAR AXLE TRUCK (0 min 42 sec)


The gear system is scientifically calculated and rationally designed. greatly reduce the motor, ESC load, and improve the stability of electronic equipment.