Posted by bill_delong | Today @ 07:20 PM | 122 Views
This will be an evolving thread as I build and review a PR Racing SB401-T (1/10 Mini Truggy). Look for regular updates to this post as I plan to race this buggy in the 4WD Mod Truck class at Thornhill Racing Circuit (Turf Track). Full disclosure, I recently picked up a sponsorship through PR Racing so be prepared to expect some bias, but I will do my best to identify potential areas to consider making upgrades to improve the quality of this kit where applicable.

A quick background on me: I started club racing around 2010 and have slowly improved my skills to where I'm one of the slowest of the fast guys at the club in my area, ha! I typically average between 96% -98% consistency and will occasionally pick up a win for club racing and often make the A Main for regional events. My first 1/10 Truggy was the HoBao Hyper10TT which I raced about 5 years ago until the class died. Then the class came back about about a year ago when TEKNO released the ET410 which I have been racing since 2018. I look forward to comparing the PR truck with it's predecessors!






Hits:
  • Loaded with upgrades in the kit for exceptional value!
  • Global Team Driver Support
...Continue Reading
Posted by BDOG1 | Today @ 06:44 PM | 137 Views
We are back from our Midwest Slope adventure 2867 miles later.
We left Wilson at 6:00am Sunday after topping off on coffee at the K-18 Cafe ( they let us in before they open to help us get on the road early ) and arriving back home on my door step at 5:00 am Monday .
morning .
Great People !
Great flying !
Great food !
W.O.W.
Posted by decreale | Today @ 01:08 PM | 520 Views
Recently got this plane, easy build however one of the supports would not clamp onto the wing may have to glue it. Not sure about that yet. Taking off was a problem you need to apply a little amount of down elevator, yes down to keep the tail from fish tailing all over the place. Once you see the back come up off the ground neutralize the elevator, apply more power and up she goes. Great flying plane
Posted by Darunion | Today @ 11:30 AM | 565 Views
Currently having an issue sending/receiving messages on rcg. Please feel free to post in here if you cant message me or are not getting a reply when expected.
Posted by DutchRC | Today @ 09:18 AM | 652 Views
Halloa people

I've had a HobbyKing / Quanum XJ470 aerial video quadcopter for quite some time now, and some of the electronics aren't really up to date anymore
So! It's time to elevate this quad to current standards

In this video I'll give you an overview of my rebuild process, and do a first test flight with the new setup..
In future video's I'll do some more tuning.. Add the gimbal & action cam so we can actually shoot some aerial video's

Quanum XJ470 Video Drone Overhaul ! - Matek F722-SE + BF 4.0.2 + FrSky R9M + AKKtek 2000mW VTX! :O (13 min 20 sec)


What's new:
Matek F722-SE Rolls Royce FC: https://www.banggood.com/Matek-Syste...13974002015038
FrSky R9M with receiver: https://www.banggood.com/FrSky-R9M-2...13974002015038
AKKtek FX2 Dominator: https://www.akktek.com/products/fx2-dominator.html


What was allready there:
The Quanum XJ470 frame: https://goo.gl/WNxRSV
Quanum Elite 4006 740Kv: https://goo.gl/AyQofz
12x5.5 CF propellors: https://goo.gl/pDQOIu
4x DYS XS 30A ESC's: https://goo.gl/sbKLec
Zhiyun Z1 - Tiny 2 gimbal: http://goo.gl/R7OrRO
Foxeer Monster V2 Cmos camera: https://goo.gl/0XhtvS
Foxeer SMA clover leaf antenna: https://goo.gl/FL5hHY
Matek WS2812B programmable LED strip: https://goo.gl/QvpaAX
Posted by Bill M - RC | Today @ 08:58 AM | 652 Views
Hi fellow rc pilots & rc enthusiasts

Transtec Attack 66 review. This F4 OSD 1S Brushless Tiny Whoop FPV Racing Drone PNP with Caddx Firefly 1200TVL Camera review includes unboxing, inspection, setup, binding, betafight, Bl-heli settings, camera, fpv and flight tests. Flight action starts at 10:24 .

You can get this Transtec Attack 66 F4 OSD 1S Brushless Tiny Whoop FPV Racing Drone PNP with Caddx Firefly 1200TVL Camera here now: http://bit.ly/2GQ6qx7

Transtec Attack 66 review - F4 OSD 1S Brushless Tiny Whoop FPV Racing Drone (19 min 22 sec)

Posted by RC Roundtable | Today @ 08:52 AM | 661 Views
Episode 81: "Curse of the Habu" is now live!
http://rcroundtable.com/podcasts/mp3/RCR_episode_81.mp3

In this episode, we talk about:
-Flooded fields (2:15)
-E-flite Carbon Cub SS
-Fitz's Habu update (14:30)
-Hangar 9 Timber 110 (18:22)
-New FAA silliness (26:20)
-RC kits at Brodak (37:36)
-Lee's 3D printer search (42:08)
-Workbench updates (50:18)
-Fitz gets RC antiques (1:07:28)
-Giveaway winner (1:20:33)

You can visit our website at RCRoundtable.com to listen over the web or download an MP3 of the show. Or, you can subscribe to RC Roundtable on iTunes.

We would love to read your comments and ideas. Please drop us a line here, our facebook page, or email: [email protected].
Posted by Edge767 | Today @ 07:54 AM | 679 Views
I haven't flown in over a year. Nearly a year and a half. Why? Because I'm in the National Guard, and I've been tied up on the weekends. Also, our club field has been under construction for over a year (county project), and coupled with the fact that on the weekends I don't have drill, my wife has either had me traveling with her or doing honey-do's, or the weather hasn't been conducive to flying. So, here I am: severely out of practice and longing to get back into the air.

I did get a DJI Mavic 2 Pro yesterday, and despite the high winds (gusting to 20 mph), I was able to get it up into the air and get some nice video footage. I can see now why these drones are both so popular and possibly dangerous; they are ridiculously easy to fly and require very little skill. They do get some amazing footage, though, and I have to admit that I'm really looking forward to some trips now with this drone.

I'm probably one of the very few who has my FAA, AMA, and contact into actually on my drone, but I figure the last thing I need is to have something bad happen and I run afoul of the law or the AMA. Anyway, I hope to be able to get back into the air soon with my beloved warbirds. I miss flying them dearly.
Posted by ww5302 | Today @ 07:16 AM | 713 Views
I'm sure that this situation happens to a lot of people, that is the Lipo battery is dead after it used a few times. And users' first reaction must be that the Lipo battery isn't good enough. As long as you buy a reliable brand, as long as you use the Lipo battery in the right way, the Lipo battery will last a long time.

Let's start with what might kill the Lipo battery:

The 1st reason: It is not correct for Lipo batteries to store at full power or no power for long periods of time. If you don't use your Lipo battery for a long period of time, such as 1 month, 6 months, or even longer. Then proper handling way will ensure that your Lipo battery will be good in storage.

For Storage, take note of the following:

(1) In general, we recommend that the customers store the Lipo battery at half power. And the temperature of the storage environment is about 25 °C.

(2) Before storage, charge the Lipo battery for the last time. Check the voltage of each Lipo battery cell. Make sure that the Lipo battery cell voltage is almost the same (error + /-0.01V). Then discharge, release about 50-60% of the power, and then save.

(3) If the Lipo battery is not used for more than 1 month. Then check the voltage of each Lipo battery cell regularly every month. To ensure that the lowest battery voltage is not less than 3.0V, if less than 3.0V, then try to charge and discharge again.

The 2nd reason: Many users always overcharge or over-discharge their Lipo batteries while using
...Continue Reading
Posted by old4570 | Today @ 03:29 AM | 804 Views


I only had one 5x3x3 prop to try on the Mini Surfer 800
Today I got a package with some new props ..
So of course I had to see how much current they pulled .
Posted by DoubleEagle | Today @ 01:52 AM | 832 Views
Nicely made replica, fantastic futures and lot's of fun for your kid and you!!!
Mercedes-Benz Arocs replica
Simulation lights
Simulation sounds
Rc control 180 ° boom rotation
And many other features
Specification
Item No.: E565-003
Model Name: 1:20 RC Mercedes-Benz Arocs Crane
Size of vehicle(cm): 38.5*21.5*17.0
Net Weight (kgs): 11.8
Battery for vehicle: 400mAh, 4.8V rechargeable
Website: http://en.doubleeagle.cc/
Business enquire: [email protected]
Double-Eagle 1:20 Mercedes-Benz Arocs Crane/Loader Truck (2 min 18 sec)

Posted by muskrat975 | Today @ 01:32 AM | 843 Views
I recently just purchased from a guy. Back of strut is worn looking and missing teplon bushing. When I take off prop seems a little too loud? Until it planes out! Also it didn’t want to stop doing circles after about 10 mins. Prop wouldn’t straighten out until about 2 mins later
Posted by --Oz-- | Today @ 12:05 AM | 901 Views
Look at the picture, this picture is amazing once you figure out what happened. The "T" in the top left of the picture is the scope trigger point, ball at rest (0 rpm) 25ms later, the ball is at 3.2 million rpm!
Name: 0rpm to 3.2Mrpm in 25ms - 250W.jpg
Views: 2
Size: 345.2 KB
Description:

I always set the vertical cursors to my current record (in microseconds), so I can see when I beat my personal best.
I usually prepare 10~15 balls for testing that day, one day, I got to this one ball, I guess things were just right (ball/container/angle/settings). What happened was amazing and unbelievable, with about ~250W (18V ~13A). First hall sensor trigger, it gave a ~0.25 second burst, I could hear the power supply give a quick 60Hz hum, sucking some juice, then the scope displayed high 2 million rpms! The major keys it was legit was no vibrations and the ball was still spinning down from momentum. I have been running the scope at 10us/div (since going for 2+ mil), but I decided to get the big picture, zoomed out the scope to 100ms/div and set single trigger and tried again, moved the hall sensor into position and it happened again, a burst of around ~250ms then hall stops triggering the coil. I zoom the scope into the end of the coil drive signal, this time just over 3 million in a quarter second! I stopped to think about it, no Ford transmission vib's, just pure signing spinning ball. Blown away I called a friend to witness what happened, I did it 4 more times, the most impressive time was in the picture, it shows 0 rpm to 3.2 million rpm...Continue Reading
Posted by brett.c | Yesterday @ 11:52 PM | 890 Views
I've had this F4F for a number of years now and although it has never been in a major prang it did need a bit of a refresh.
Beside, my eyes just ain't what they use to be and the blue grey scheme was getting difficult to see.
Time for a prewar dress up.
Much easier to see now and IMHO looks a lot nicer too.
Posted by brett.c | Yesterday @ 11:25 PM | 918 Views
I built this out of spare parts and left overs from old planes.
No dollars were wasted on this build because none were spent.
The wings and tail are modified from a Phoenix 1600mm glider that a fellow club member had rammed into a lighting tower.
Fuselage is made up from 15mm thick blue foam which was salvaged from some packaging material that I found at work.
This was then covered with 30gpm tissue paper and painted with cheap rattle can enamel.
Retracts came from a Durafly Corsair and were pinned to stop them twisting 90deg.

Flies really well. Quite quick and only needs 1/2 throttle for most flying. Very maneuverable and slow flies well. Take offs and landing are a breeze.
All round this is a rather pleasant plane to fly at any speed.

Specs:
Wingspan: 1125mm
Weight: 1205grams
Motor, Turnigy 3536 1250 Kv
ESC, HK 50A
Prop: 9x5
Battery: 2200/4s
Servos, 9g with the elevator being metal geared.
Posted by Oneblueyedog | Yesterday @ 10:01 PM | 951 Views
I have an ancient Telemaster 40 that was for sale. It wasn't getting any serious interest. So I stripped it down of all of its monokote/econocote. Whatever it was it took about 15 hours to get to bare balsa. I used an Xacto, packing tape and Scotchbrite pads. Time consuming. No wonder it's a job most avoid. Hunting cool color schemes down. May just go with stock red and white. It was a Hobby Lobby plane. It has builder markings in it.
Posted by navigator2011 | Yesterday @ 08:03 PM | 1,041 Views
After flying my Blade Nano S2 enough to wear down the performance of the stock, brushed motor, I decided to install Horizon Hobby's brushless upgrade, BLH3325, into the S2. I chose to basically copy the install posted by HF member, Chris1683 in the HF thread, Ideas about brushless upgrade, because, well, it seems like the best way.

As many nano-enthusiasts will attest, keeping the weight of the nano as low as possible is an important factor. The weight of the nano can affect everything from tail hold to flight time, as well as climb-out and flipping performance! Before the installation, I weighed the S2 without a battery. The scale waffled between 26g and 27g, but seemed to settle on 26g, as shown in Fig. 1. I decided to pull the HH brushless motor and ESC from my Nano CPS since I knew that they would add only about 2g, overall.

One key to keeping the weight of the brushless upgrade on the low side is getting rid of the connectors that come with the upgrade and shortening the wires as much as possible. Of course this makes soldering even more difficult, and it's not easy for me to see such small solder points. I almost felt like I was soldering blind!

As shown in Fig. 2, I removed the brushless ESC from its shrink-wrap and then soldered on new, slightly thicker wires. The only decent place to mount the ESC is on front of the receiver board, and the stock wires were getting in the way. So I removed the stock wires and soldered the thicker wires to the...Continue Reading
Posted by Digiflier | Yesterday @ 06:23 PM | 1,046 Views
Shot at a recent Open House Fly-In event at the Burnaby Lake Flyers field.
Posted by wayne65 | Yesterday @ 02:37 PM | 1,155 Views
I have a FeiBao 1/7 scale F-5 for sale

. I set up the jet as a 120mm EDF. I still have the split Turbine pipe, fuel tanks, intakes and small other items to convert back to Turbine.
You will have to install wood mounts to install your Turbine. The front nose wood mount needs fixing (ran off the runway into the grass )...Daaaaa
Comes with a 9ch X spectrum receiver. The flight stabilizer is an Eagle tree guardian. Air Breaks and all the servos
I used a 3 cell 2200 for the BEC Pro receiver power and two 6 cell 5000 battery packs to fly it.
The jet WILL NOT come with the 120mm EDF unit or the 160 HV ESC.

I will take $1700 for it, I have Paypal. you will have to pay for boxing and shipping or pick up in KY zip 40160.

I am starting a new project and the Boss said "Clean out the hanger".
I am King of the castle ,,,,,, when she's not home.....

Feel free to PM me for any questions and photos.

Thanks for looking.

wayne



Images View all Images in thread
Name: Waynes F-5 left side view.jpg Views: 82 Size: 174.3 KB Description: Views: 82


Name: Waynes F-5 frount nose view.jpg Views: 73 Size: 54.5 KB Description: Views: 73


Name: 20180213_193024.jpg Views: 103 Size: 822.2 KB Description: Views: 103


Name: 20180223_170850.jpg Views: 69 Size: 2.64 MB Description: Views: 69