Mad_angler1's blog View Details
Archive for December, 2016
Posted by Mad_angler1 | Dec 30, 2016 @ 06:12 AM | 9,662 Views
After shooting my mouth off in the DJI Mavic thread Jim T very kindly invites me onto the weekly podcast

11 Minutes onwards i turn up.

RCG Live - STRIX ALATUS FPV Wing - Eagle Micro Vector (1 hr 17 min 25 sec)

Special Thanks to Jason and Matt as well.

Please subscribe to the RCG podcast on YT its held every Thursday at 8PM GMT/3PM Eastern Time.
Posted by Mad_angler1 | Dec 18, 2016 @ 04:27 PM | 22,349 Views
DJI Phantom 4 Advanced & PRO Firmware Update - Troubleshooting and common Issue Information Updated

The Phantom 4 Advanced & Pro is available from DJI

If you would like to support me you can choose to order from DJI via the below links

The Phantom 4 Advanced

The Phantom 4 Pro

Note: As with all my own blog post all links may be affiliate links and i will receive a small commission on any purchase bought through them , if you wish to support me then thank you however it is not expected .

Latest FW versions

Phantom 4 Advanced

Date : 08/06/2017

Aircraft Firmware : V01.00.0128

Phantom 4 Adv Remote Controller Firmware : V2.1.1.0

Phantom 4 Adv + Remote Controller Firmware : V1.2.0.0

Phantom 4 Pro

Date : 08/06/2017

Aircraft Firmware : V01.04.0602

Phantom 4 Pro Remote Controller Firmware : V1.4.1.0

Phantom 4 Pro+ Remote Controller Firmware : V



Rebind RC to Craft as per the DJI Manual or the Video below on this blog


Perform a full factory reset from the Plus RC and the maps will return.


These are currently missing from the latest release -
...Continue Reading
Posted by Mad_angler1 | Dec 09, 2016 @ 03:00 PM | 8,485 Views
As winter is now in full swing I fancied doing a new FPV quad build, for months I have lusted after the TBS Vendetta but never got the cash together to actually buy one, further to this some time back DYS very kindly sent me some of their SE 2205 motors to test but TBH I have been up to my eyes in it and was unable to really do anything with them so it was an opportunity to start a new build rather than buy one.

What was important to me in this build was something that gave the appearance and compact build of the TBS, I did not want wires hanging out everywhere ect, I wanted a clean tidy build, the first port of call was looking at frames and very quickly came across Thug Frames in the UK .

These guys make some really interesting models, including The Pig, The Squeeler , The V5 and the BRÅNNSTORMER, I really liked the V5 220 Lowrider, this model comes in a few versions like the Original Lowrider 220 V5 that takes a standard camera mount options, The Session edition that has specific cut outs to hold the GoPro Session above the FPV camera and the Session X Edition.

I went for the Original 220 V5 and just over 24 hours later it had arrived

Please note some part of these images have been distorted intentionally.

The Frame Components include

220 arms x2, v5 bottom plate x1, 2 piece top plate with new strapways instead of slots (engravings can be mounted facing either up or down)

Finger cam mounts

Pdb v1.2 (just add xt60)

...Continue Reading