Mad_angler1's blog View Details
Archive for September, 2015
Posted by Mad_angler1 | Sep 16, 2015 @ 05:14 PM | 27,920 Views
This week I received my Fat Shark Dominator V3 from Team Legit on the US.

DJI Store

Phantom 3

Team Legit

They come in this nice rigid case

Once open you can see the goggles and accessories.

In the case

...Continue Reading
Posted by Mad_angler1 | Sep 07, 2015 @ 05:53 PM | 21,085 Views
DJI Links

DJI Phantom 4

DJI Phantom 3

DJI Inspire 1

Please Note: As with all my own blog post all links may be affiliate links and i may receive a small commission on any purchase bought through them , if you wish to support me then then are there otherwise you can navigate directly to DJI's website, thank you.

Please See DJI for up to date firmware information

Please Note FW V1.4 onwards does not contain a controller update you need to use V1.320 to update the controller that was the latest build. [/B]

There is a LOT of confusion around controller in this update, please see below to see what you need to do regarding the update

There are 2 versions of the P3 controller, Model GL300A and GL300B, the Model is written on the rear of the controller next to the DJI logo.

GL300A : Up to FW 1.3.20 it could be updated via the USB port, Once you installed V1.320 future updates will be via the DJI Go App.

GL300B, Can only be updated via the DJI Go App, Anything before 1.3.20 is not relevant as there was no update other than via the App.
If you have the GL300B update is via the App only, No further action is required.


If you are currently on 1.3.20 then all future updates are via the DJI Go App.

If you are on V1.1.9, V.1.2.6, 1.2.8 you need to...Continue Reading