Committed another build.
A small high wing trainer.
It's made of 3mm Depron, uses an AR6400, two 2,3g long throw servos (unfortunately with build-in differential) and the motor/gear/prop from a Sport Cub S.
Wingspan: 50cm
Length: 37,5cm
Weigh: 41g (without battery)
...Continue Reading
A small high wing trainer.
It's made of 3mm Depron, uses an AR6400, two 2,3g long throw servos (unfortunately with build-in differential) and the motor/gear/prop from a Sport Cub S.
Wingspan: 50cm
Length: 37,5cm
Weigh: 41g (without battery)
...Continue Reading
Comments (3)
Add Comment
I've been contemplating building a STOLP 500 Starlet for a while...
This is my first take on it:
This is my first take on it:
Season's first little build!
More info: https://www.rcgroups.com/forums/show....php?t=2534202
Happy landings :-)
More info: https://www.rcgroups.com/forums/show....php?t=2534202
Happy landings :-)
Is it a dream coming true or my second birth? I'm about to find out!
It's a milestone for sure...
It's a milestone for sure...
I've made this little high-wing trainer for this winter's indoor season.
It's made out of 3mm Depron, the wing has a KFM-2 airfoil.
It uses an AR6400, two AS2000L and a 8.5mm coreless brushed motor with its gears (from an UM T-28 Trojan).
Unfortunately a small piece of the nose has already broken off before I took the pictures... and one of the landinggear's carbonstruts must have been weekened before it even was glued in, it broke on the first landing...
Happy landings :-)
It's made out of 3mm Depron, the wing has a KFM-2 airfoil.
It uses an AR6400, two AS2000L and a 8.5mm coreless brushed motor with its gears (from an UM T-28 Trojan).
Unfortunately a small piece of the nose has already broken off before I took the pictures... and one of the landinggear's carbonstruts must have been weekened before it even was glued in, it broke on the first landing...
Happy landings :-)
Having an unexpected opportunity to go to an indoor club-meeting, I rushed to put something together, from what I had on hand...
Since I kept a Dead Simple Wing laying around from a previous, dismantled build,
I decided to build a simple fuselage for it.
Here's the result:
Since I kept a Dead Simple Wing laying around from a previous, dismantled build,
I decided to build a simple fuselage for it.
Here's the result:
I was fiddling with the idea of making an Ultra Micro canard...
https://www.rcgroups.com/forums/show....php?t=1676705
...Continue Reading
Plans are from: https://www.rcgroups.com/forums/show....php?t=1252282
(does not include the profile fuselage)
https://www.rcgroups.com/forums/show....php?t=1444586
| Ultra Micro Grumman Albatross Movie (0 min 58 sec) |
Original plans (intended for paper) are from http://www.bobscardmodels.net76.net/
