The new design relocates the servos in an optimum position for direct to swash operation, and adds provision for larger 49mm diameter motors like the Scorpions and Turnigy 600. Adds additional equipment rack locations, and battery plate adjustment.

Useful parts:
http://helidirect.com/metal-c-washer...lue-p-7934.hdx
http://helidirect.com/r550065-10-out...50-p-15126.hdx
https://www.hobbyking.com/hobbyking/s...dProduct=12297
https://www.hobbyking.com/hobbyking/s...r_H60154_.html
https://www.hobbyking.com/hobbyking/s...rts_tray_.html
https://www.hobbyking.com/hobbyking/s...ery_tray_.html
https://www.hobbyking.com/hobbyking/s...t_H60033_.html
https://www.hobbyking.com/hobbyking/s...se_plate_.html
https://www.hobbyking.com/hobbyking/s...2_HN6077_.html
https://www.hobbyking.com/hobbyking/s...d_H60150_.html
https://www.hobbyking.com/hobbyking/s...H60035_1_.html
https://www.hobbyking.com/hobbyking/s...y_H60041_.html

Phat Motors
https://www.hobbyking.com/hobbyking/s...li_880kv_.html
https://www.hobbyking.com/hobbyking/s...i_1100kv_.html
http://helidirect.com/scorpion-hk-40...00-p-21009.hdx


Update:
I am now flying with a full sized tail boom, 550MM FRP blades, Outrage 550 paddles, T600 1400kv motor on 6S with a 13T pinion. -- It flies like butter, with reasonably unlimited vertical performance.

The second one with the black frame may be FBL....Continue Reading

I built a Flybarless head by cutting an Align head down about 1" and boring it out.
I also made a phasing collar for it.

A Tarot ZXY controller was used. After sorting out the gain and deadband she flies like it is on rails.

Head is lower, and makes the helicopter look a lot sleeker. I like the "Milk-jug" canopies.Duplicolor Adhesion promoter allows them to be painted. with acrylic enamel.

Updated the ZXY to 4.01 firmware- man does it fly good now.

Want to try
http://www.goodluckbuy.com/kbar-5-3-...elicopter.html
next